From: Pat Thoyts Date: Sat, 26 Aug 2017 19:44:43 +0000 (+0100) Subject: Include a README file. X-Git-Tag: v1^0 X-Git-Url: https://privyetmir.co.uk/gitweb.cgi?a=commitdiff_plain;h=1a3728da19b1d3bc4967bf5c68ecc36dc0098231;p=electronics%2FUSB-RS485-Adapter Include a README file. Manufactured board are good except plated mounting holes under USB connector. --- diff --git a/README.md b/README.md new file mode 100644 index 0000000..4bc2b6b --- /dev/null +++ b/README.md @@ -0,0 +1,15 @@ +# USB Serial to RS-485 converter + +This project is a board that converts USB serial communications to +RS-485. An FT232 device is connected to a MAX483 RS-485 transciever +which allows for a longer distance multidrop communications bus. + +The schematic is based on the example shown in the FT232 datasheet. + +## Notes + +Manufactured by SeeedStudio Aug 2017. Board is fine except the mounting +holes in the USB micro connector footprint have been plated (they are +correctly marked as unplated). This allows the shell to short with Vcc +so it was necessary to lightly drill the holes to disconnect them from +copper on both top and bottom.