--- /dev/null
+# makefile.vc -- -*- Makefile -*-
+#
+# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
+#
+# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to
+# make it suitable as a general package makefile. Look for the word EDIT
+# which marks sections that may need modification. As a minumum you will
+# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values
+# relevant to your package.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# Copyright (c) 1995-1996 Sun Microsystems, Inc.
+# Copyright (c) 1998-2000 Ajuba Solutions.
+# Copyright (c) 2001 ActiveState Corporation.
+# Copyright (c) 2001-2002 David Gravereaux.
+# Copyright (c) 2003 Pat Thoyts
+#
+#-------------------------------------------------------------------------
+# RCS: @(#)$Id$
+#-------------------------------------------------------------------------
+
+!if "$(MSVCDIR)" == ""
+MSG = ^
+You will need to run vcvars32.bat from Developer Studio, first, to setup^
+the environment. Jump to this line to read the new instructions.
+!error $(MSG)
+!endif
+
+#------------------------------------------------------------------------------
+# HOW TO USE this makefile:
+#
+# 1) It is now necessary to have %MSVCDir% set in the environment. This is
+# used as a check to see if vcvars32.bat had been run prior to running
+# nmake or during the installation of Microsoft Visual C++, MSVCDir had
+# been set globally and the PATH adjusted. Either way is valid.
+#
+# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
+# directory to setup the proper environment, if needed, for your current
+# setup. This is a needed bootstrap requirement and allows the swapping of
+# different environments to be easier.
+#
+# 2) To use the Platform SDK (not expressly needed), run setenv.bat after
+# vcvars32.bat according to the instructions for it. This can also turn on
+# the 64-bit compiler, if your SDK has it.
+#
+# 3) Targets are:
+# all -- Builds everything.
+# <project> -- Builds the project (eg: nmake sample)
+# test -- Builds and runs the test suite.
+# install -- Installs the built binaries and libraries to $(INSTALLDIR)
+# in an appropriate subdirectory.
+# clean/realclean/distclean -- varying levels of cleaning.
+#
+# 4) Macros usable on the commandline:
+# INSTALLDIR=<path>
+# Sets where to install Tcl from the built binaries.
+# C:\Progra~1\Tcl is assumed when not specified.
+#
+# OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none
+# Sets special options for the core. The default is for none.
+# Any combination of the above may be used (comma separated).
+# 'none' will over-ride everything to nothing.
+#
+# static = Builds a static library of the core instead of a
+# dll. The shell will be static (and large), as well.
+# msvcrt = Effects the static option only to switch it from
+# using libcmt(d) as the C runtime [by default] to
+# msvcrt(d). This is useful for static embedding
+# support.
+# staticpkg = Effects the static option only to switch
+# tclshXX.exe to have the dde and reg extension linked
+# inside it.
+# threads = Turns on full multithreading support.
+# thrdalloc = Use the thread allocator (shared global free pool).
+# symbols = Adds symbols for step debugging.
+# profile = Adds profiling hooks. Map file is assumed.
+# loimpact = Adds a flag for how NT treats the heap to keep memory
+# in use, low. This is said to impact alloc performance.
+#
+# STATS=memdbg,compdbg,none
+# Sets optional memory and bytecode compiler debugging code added
+# to the core. The default is for none. Any combination of the
+# above may be used (comma separated). 'none' will over-ride
+# everything to nothing.
+#
+# memdbg = Enables the debugging memory allocator.
+# compdbg = Enables byte compilation logging.
+#
+# MACHINE=(IX86|IA64|ALPHA)
+# Set the machine type used for the compiler, linker, and
+# resource compiler. This hook is needed to tell the tools
+# when alternate platforms are requested. IX86 is the default
+# when not specified.
+#
+# TMP_DIR=<path>
+# OUT_DIR=<path>
+# Hooks to allow the intermediate and output directories to be
+# changed. $(OUT_DIR) is assumed to be
+# $(BINROOT)\(Release|Debug) based on if symbols are requested.
+# $(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
+#
+# TESTPAT=<file>
+# Reads the tests requested to be run from this file.
+#
+# CFG_ENCODING=encoding
+# name of encoding for configuration information. Defaults
+# to cp1252
+#
+# 5) Examples:
+#
+# Basic syntax of calling nmake looks like this:
+# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
+#
+# Standard (no frills)
+# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
+# Setting environment for using Microsoft Visual C++ tools.
+# c:\tcl_src\win\>nmake -f makefile.vc all
+# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
+#
+# Building for Win64
+# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
+# Setting environment for using Microsoft Visual C++ tools.
+# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
+# Targeting Windows pre64 RETAIL
+# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64
+#
+#------------------------------------------------------------------------------
+#==============================================================================
+###############################################################################
+#------------------------------------------------------------------------------
+
+!if !exist("makefile.vc")
+MSG = ^
+You must run this makefile only from the directory it is in.^
+Please `cd` to its location first.
+!error $(MSG)
+!endif
+
+#-------------------------------------------------------------------------
+# Project specific information (EDIT)
+#
+# You should edit this with the name and version of your project. This
+# information is used to generate the name of the package library and
+# it's install location.
+#
+# For example, the sample extension is going to build sample04.dll and
+# would install it into $(INSTALLDIR)\lib\sample04
+#
+# You need to specify the object files that need to be linked into your
+# binary here.
+#
+#-------------------------------------------------------------------------
+
+PROJECT = udp
+!include "rules.vc"
+
+DOTVERSION = 1.0.6
+VERSION = $(DOTVERSION:.=)
+STUBPREFIX = $(PROJECT)stub
+
+DLLOBJS = \
+ $(TMP_DIR)\udp_tcl.obj \
+ $(TMP_DIR)\tcludp.res
+
+#-------------------------------------------------------------------------
+# Target names and paths ( shouldn't need changing )
+#-------------------------------------------------------------------------
+
+BINROOT = .
+ROOT = ..
+
+PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
+PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT)
+PRJLIB = $(OUT_DIR)\$(PRJLIBNAME)
+
+PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib
+PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME)
+
+### Make sure we use backslash only.
+LIB_INSTALL_DIR = $(_INSTALLDIR)\lib
+BIN_INSTALL_DIR = $(_INSTALLDIR)\bin
+DOC_INSTALL_DIR = $(_INSTALLDIR)\doc
+SCRIPT_INSTALL_DIR = $(_INSTALLDIR)\lib\$(PROJECT)$(DOTVERSION)
+INCLUDE_INSTALL_DIR = $(_INSTALLDIR)\include
+
+### The following paths CANNOT have spaces in them.
+GENERICDIR = $(ROOT)\generic
+WINDIR = $(ROOT)\win
+LIBDIR = $(ROOT)\library
+DOCDIR = $(ROOT)\doc
+TOOLSDIR = $(ROOT)\tools
+COMPATDIR = $(ROOT)\compat
+
+### Find a tclsh for testing and installation.
+!if !exist("$(TCLSH)")
+TCLSH = $(BIN_INSTALL_DIR)\tclsh$(TCL_VERSION).exe
+!endif
+
+#---------------------------------------------------------------------
+# Compile flags
+#---------------------------------------------------------------------
+
+!if !$(DEBUG)
+!if $(OPTIMIZING)
+### This cranks the optimization level to maximize speed
+cdebug = -O2 -Op -Gs
+!else
+cdebug =
+!endif
+!else if "$(MACHINE)" == "IA64"
+### Warnings are too many, can't support warnings into errors.
+cdebug = -Z7 -Od
+!else
+cdebug = -Z7 -WX -Od
+!endif
+
+### Declarations common to all compiler options
+cflags = -nologo -c -W3 -YX -Fp$(TMP_DIR)^\
+
+!if $(PENT_0F_ERRATA)
+cflags = $(cflags) -QI0f
+!endif
+
+!if $(ITAN_B_ERRATA)
+cflags = $(cflags) -QIA64_Bx
+!endif
+
+!if $(MSVCRT)
+!if $(DEBUG)
+crt = -MDd
+!else
+crt = -MD
+!endif
+!else
+!if $(DEBUG)
+crt = -MTd
+!else
+crt = -MT
+!endif
+!endif
+
+INCLUDES = $(TCL_INCLUDES) -I"$(WINDIR)" -I"$(GENERICDIR)"
+BASE_CLFAGS = $(cflags) $(cdebug) $(crt) $(INCLUDES)
+CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE
+TCL_CFLAGS = -DUSE_TCL_STUBS -DVERSION="\"$(DOTVERSION)\"" $(BASE_CLFAGS) $(OPTDEFINES)
+
+#---------------------------------------------------------------------
+# Link flags
+#---------------------------------------------------------------------
+
+!if $(DEBUG)
+ldebug = -debug:full -debugtype:cv
+!else
+ldebug = -release -opt:ref -opt:icf,3
+!endif
+
+### Declarations common to all linker options
+lflags = -nologo -machine:$(MACHINE) $(ldebug)
+
+!if $(PROFILE)
+lflags = $(lflags) -profile
+!endif
+
+!if $(ALIGN98_HACK) && !$(STATIC_BUILD)
+### Align sections for PE size savings.
+lflags = $(lflags) -opt:nowin98
+!else if !$(ALIGN98_HACK) && $(STATIC_BUILD)
+### Align sections for speed in loading by choosing the virtual page size.
+lflags = $(lflags) -align:4096
+!endif
+
+!if $(LOIMPACT)
+lflags = $(lflags) -ws:aggressive
+!endif
+
+dlllflags = $(lflags) -dll
+conlflags = $(lflags) -subsystem:console
+guilflags = $(lflags) -subsystem:windows
+baselibs = $(TCLSTUBLIB) wsock32.lib
+
+#---------------------------------------------------------------------
+# TclTest flags
+#---------------------------------------------------------------------
+
+!IF "$(TESTPAT)" != ""
+TESTFLAGS = -file $(TESTPAT)
+!ENDIF
+
+#---------------------------------------------------------------------
+# Project specific targets (EDIT)
+#---------------------------------------------------------------------
+
+all: setup $(PROJECT)
+$(PROJECT): setup $(PRJLIB)
+install: install-binaries install-libraries install-docs
+
+
+test: setup $(PROJECT)
+ set TCL_LIBRARY=$(ROOT)/library
+!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE"
+ $(TCLSH) "$(ROOT)/tests/all.tcl" $(TESTFLAGS)
+!else
+ @echo Please wait while the tests are collected...
+ $(TCLSH) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) > tests.log
+ type tests.log | more
+!endif
+
+setup:
+ @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
+ @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)
+
+$(PRJLIB): $(DLLOBJS)
+ $(link32) $(dlllflags) -out:$@ $(baselibs) @<<
+$**
+<<
+ -@del $*.exp
+
+$(PRJSTUBLIB): $(PRJSTUBOBJS)
+ $(lib32) -nologo -out:$@ $(PRJSTUBOBJS)
+
+#---------------------------------------------------------------------
+# Implicit rules
+#---------------------------------------------------------------------
+
+{$(WINDIR)}.c{$(TMP_DIR)}.obj::
+ $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(GENERICDIR)}.c{$(TMP_DIR)}.obj::
+ $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(COMPATDIR)}.c{$(TMP_DIR)}.obj::
+ $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(WINDIR)}.rc{$(TMP_DIR)}.res:
+ $(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \
+!if $(DEBUG)
+ -d DEBUG \
+!endif
+!if $(TCL_THREADS)
+ -d TCL_THREADS \
+!endif
+!if $(STATIC_BUILD)
+ -d STATIC_BUILD \
+!endif
+ $<
+
+.SUFFIXES:
+.SUFFIXES:.c .rc
+
+#---------------------------------------------------------------------
+# Installation. (EDIT)
+#
+# You may need to modify this section to reflect the final distribution
+# of your files and possibly to generate documentation.
+#
+#---------------------------------------------------------------------
+
+install-binaries:
+ @echo Installing to '$(SCRIPT_INSTALL_DIR)'
+ @if not exist $(SCRIPT_INSTALL_DIR)\nul mkdir $(SCRIPT_INSTALL_DIR)
+ $(CPY) $(PRJLIB) $(SCRIPT_INSTALL_DIR)
+
+install-libraries:
+ @echo Installing to '$(SCRIPT_INSTALL_DIR)'
+ @if exist $(LIBDIR)\nul $(CPY) $(LIBDIR)\*.tcl $(SCRIPT_INSTALL_DIR)
+ @cd $(SCRIPT_INSTALL_DIR)
+ @echo pkg_mkIndex -verbose . | $(TCLSH)
+
+install-docs:
+
+#---------------------------------------------------------------------
+# Clean up
+#---------------------------------------------------------------------
+
+clean:
+ @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR)
+
+realclean: clean
+ @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)
+
+distclean: realclean
+ @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe
+ @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj
--- /dev/null
+/* ----------------------------------------------------------------------------
+ * nmakehlp.c --
+ *
+ * This is used to fix limitations within nmake and the environment.
+ *
+ * Copyright (c) 2002 by David Gravereaux.
+ * Copyright (c) 2003 by Patrick Thoyts
+ *
+ * See the file "license.terms" for information on usage and redistribution
+ * of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+ *
+ * ----------------------------------------------------------------------------
+ * RCS: @(#) $Id$
+ * ----------------------------------------------------------------------------
+ */
+#include <windows.h>
+#include <stdio.h>
+#pragma comment (lib, "user32.lib")
+#pragma comment (lib, "kernel32.lib")
+
+/* protos */
+int CheckForCompilerFeature (const char *option);
+int CheckForLinkerFeature (const char *option);
+int IsIn (const char *string, const char *substring);
+DWORD WINAPI ReadFromPipe (LPVOID args);
+int GetVersionFromHeader(const char *tclh, const char *tkh);
+
+/* globals */
+typedef struct {
+ HANDLE pipe;
+ char buffer[1000];
+} pipeinfo;
+
+pipeinfo Out = {INVALID_HANDLE_VALUE, '\0'};
+pipeinfo Err = {INVALID_HANDLE_VALUE, '\0'};
+
+
+
+/* exitcodes: 0 == no, 1 == yes, 2 == error */
+int
+main (int argc, char *argv[])
+{
+ char msg[300];
+ DWORD dwWritten;
+ int chars;
+
+ if (argc > 1 && *argv[1] == '-') {
+ switch (*(argv[1]+1)) {
+ case 'c':
+ if (argc != 3) {
+ chars = wsprintf(msg, "usage: %s -c <compiler option>\n"
+ "Tests for whether cl.exe supports an option\n"
+ "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL);
+ return 2;
+ }
+ return CheckForCompilerFeature(argv[2]);
+ case 'l':
+ if (argc != 3) {
+ chars = wsprintf(msg, "usage: %s -l <linker option>\n"
+ "Tests for whether link.exe supports an option\n"
+ "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL);
+ return 2;
+ }
+ return CheckForLinkerFeature(argv[2]);
+ case 'f':
+ if (argc == 2) {
+ chars = wsprintf(msg, "usage: %s -f <string> <substring>\n"
+ "Find a substring within another\n"
+ "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL);
+ return 2;
+ } else if (argc == 3) {
+ /* if the string is blank, there is no match */
+ return 0;
+ } else {
+ return IsIn(argv[2], argv[3]);
+ }
+ case 'v':
+ if (argc != 4) {
+ chars = wsprintf(msg, "usage: %s -v <tcl.h> <tk.h>\n"
+ "Search for versions from the tcl and tk headers.",
+ argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL);
+ return 0;
+ }
+ return GetVersionFromHeader(argv[2], argv[3]);
+ }
+ }
+ chars = wsprintf(msg, "usage: %s -c|-l|-f ...\n"
+ "This is a little helper app to equalize shell differences between WinNT and\n"
+ "Win9x and get nmake.exe to accomplish its job.\n",
+ argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL);
+ return 2;
+}
+
+int
+CheckForCompilerFeature (const char *option)
+{
+ STARTUPINFO si;
+ PROCESS_INFORMATION pi;
+ SECURITY_ATTRIBUTES sa;
+ DWORD threadID;
+ char msg[300];
+ BOOL ok;
+ HANDLE hProcess, h, pipeThreads[2];
+ char cmdline[100];
+
+ hProcess = GetCurrentProcess();
+
+ ZeroMemory(&pi, sizeof(PROCESS_INFORMATION));
+ ZeroMemory(&si, sizeof(STARTUPINFO));
+ si.cb = sizeof(STARTUPINFO);
+ si.dwFlags = STARTF_USESTDHANDLES;
+ si.hStdInput = INVALID_HANDLE_VALUE;
+
+ ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES));
+ sa.nLength = sizeof(SECURITY_ATTRIBUTES);
+ sa.lpSecurityDescriptor = NULL;
+ sa.bInheritHandle = FALSE;
+
+ /* create a non-inheritible pipe. */
+ CreatePipe(&Out.pipe, &h, &sa, 0);
+
+ /* dupe the write side, make it inheritible, and close the original. */
+ DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput,
+ 0, TRUE, DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+ /* Same as above, but for the error side. */
+ CreatePipe(&Err.pipe, &h, &sa, 0);
+ DuplicateHandle(hProcess, h, hProcess, &si.hStdError,
+ 0, TRUE, DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+ /* base command line */
+ strcpy(cmdline, "cl.exe -nologo -c -TC -Fdtemp ");
+ /* append our option for testing */
+ strcat(cmdline, option);
+ /* filename to compile, which exists, but is nothing and empty. */
+ strcat(cmdline, " nul");
+
+ ok = CreateProcess(
+ NULL, /* Module name. */
+ cmdline, /* Command line. */
+ NULL, /* Process handle not inheritable. */
+ NULL, /* Thread handle not inheritable. */
+ TRUE, /* yes, inherit handles. */
+ DETACHED_PROCESS, /* No console for you. */
+ NULL, /* Use parent's environment block. */
+ NULL, /* Use parent's starting directory. */
+ &si, /* Pointer to STARTUPINFO structure. */
+ &pi); /* Pointer to PROCESS_INFORMATION structure. */
+
+ if (!ok) {
+ DWORD err = GetLastError();
+ int chars = wsprintf(msg, "Tried to launch: \"%s\", but got error [%u]: ", cmdline, err);
+
+ FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM | FORMAT_MESSAGE_IGNORE_INSERTS |
+ FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID) &msg[chars],
+ (300-chars), 0);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, strlen(msg), &err, NULL);
+ return 2;
+ }
+
+ /* close our references to the write handles that have now been inherited. */
+ CloseHandle(si.hStdOutput);
+ CloseHandle(si.hStdError);
+
+ WaitForInputIdle(pi.hProcess, 5000);
+ CloseHandle(pi.hThread);
+
+ /* start the pipe reader threads. */
+ pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID);
+ pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID);
+
+ /* block waiting for the process to end. */
+ WaitForSingleObject(pi.hProcess, INFINITE);
+ CloseHandle(pi.hProcess);
+
+ /* clean up temporary files before returning */
+ DeleteFile("temp.idb");
+ DeleteFile("temp.pdb");
+
+ /* wait for our pipe to get done reading, should it be a little slow. */
+ WaitForMultipleObjects(2, pipeThreads, TRUE, 500);
+ CloseHandle(pipeThreads[0]);
+ CloseHandle(pipeThreads[1]);
+
+ /* look for the commandline warning code in both streams. */
+ return !(strstr(Out.buffer, "D4002") != NULL || strstr(Err.buffer, "D4002") != NULL);
+}
+
+int
+CheckForLinkerFeature (const char *option)
+{
+ STARTUPINFO si;
+ PROCESS_INFORMATION pi;
+ SECURITY_ATTRIBUTES sa;
+ DWORD threadID;
+ char msg[300];
+ BOOL ok;
+ HANDLE hProcess, h, pipeThreads[2];
+ char cmdline[100];
+
+ hProcess = GetCurrentProcess();
+
+ ZeroMemory(&pi, sizeof(PROCESS_INFORMATION));
+ ZeroMemory(&si, sizeof(STARTUPINFO));
+ si.cb = sizeof(STARTUPINFO);
+ si.dwFlags = STARTF_USESTDHANDLES;
+ si.hStdInput = INVALID_HANDLE_VALUE;
+
+ ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES));
+ sa.nLength = sizeof(SECURITY_ATTRIBUTES);
+ sa.lpSecurityDescriptor = NULL;
+ sa.bInheritHandle = TRUE;
+
+ /* create a non-inheritible pipe. */
+ CreatePipe(&Out.pipe, &h, &sa, 0);
+
+ /* dupe the write side, make it inheritible, and close the original. */
+ DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput,
+ 0, TRUE, DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+ /* Same as above, but for the error side. */
+ CreatePipe(&Err.pipe, &h, &sa, 0);
+ DuplicateHandle(hProcess, h, hProcess, &si.hStdError,
+ 0, TRUE, DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+ /* base command line */
+ strcpy(cmdline, "link.exe -nologo ");
+ /* append our option for testing */
+ strcat(cmdline, option);
+ /* filename to compile, which exists, but is nothing and empty. */
+// strcat(cmdline, " nul");
+
+ ok = CreateProcess(
+ NULL, /* Module name. */
+ cmdline, /* Command line. */
+ NULL, /* Process handle not inheritable. */
+ NULL, /* Thread handle not inheritable. */
+ TRUE, /* yes, inherit handles. */
+ DETACHED_PROCESS, /* No console for you. */
+ NULL, /* Use parent's environment block. */
+ NULL, /* Use parent's starting directory. */
+ &si, /* Pointer to STARTUPINFO structure. */
+ &pi); /* Pointer to PROCESS_INFORMATION structure. */
+
+ if (!ok) {
+ DWORD err = GetLastError();
+ int chars = wsprintf(msg, "Tried to launch: \"%s\", but got error [%u]: ", cmdline, err);
+
+ FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM | FORMAT_MESSAGE_IGNORE_INSERTS |
+ FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID) &msg[chars],
+ (300-chars), 0);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, strlen(msg), &err, NULL);
+ return 2;
+ }
+
+ /* close our references to the write handles that have now been inherited. */
+ CloseHandle(si.hStdOutput);
+ CloseHandle(si.hStdError);
+
+ WaitForInputIdle(pi.hProcess, 5000);
+ CloseHandle(pi.hThread);
+
+ /* start the pipe reader threads. */
+ pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID);
+ pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID);
+
+ /* block waiting for the process to end. */
+ WaitForSingleObject(pi.hProcess, INFINITE);
+ CloseHandle(pi.hProcess);
+
+ /* wait for our pipe to get done reading, should it be a little slow. */
+ WaitForMultipleObjects(2, pipeThreads, TRUE, 500);
+ CloseHandle(pipeThreads[0]);
+ CloseHandle(pipeThreads[1]);
+
+ /* look for the commandline warning code in the stderr stream. */
+ return !(strstr(Out.buffer, "LNK1117") != NULL || strstr(Err.buffer, "LNK1117") != NULL);
+}
+
+DWORD WINAPI
+ReadFromPipe (LPVOID args)
+{
+ pipeinfo *pi = (pipeinfo *) args;
+ char *lastBuf = pi->buffer;
+ DWORD dwRead;
+ BOOL ok;
+
+again:
+ ok = ReadFile(pi->pipe, lastBuf, 25, &dwRead, 0L);
+ if (!ok || dwRead == 0) {
+ CloseHandle(pi->pipe);
+ return 0;
+ }
+ lastBuf += dwRead;
+ goto again;
+
+ return 0; /* makes the compiler happy */
+}
+
+int
+IsIn (const char *string, const char *substring)
+{
+ return (strstr(string, substring) != NULL);
+}
+
+
+static double
+ReadVersionFromHeader(const char *file, const char *macro)
+{
+ double d = 0.0;
+ CHAR szBuffer[100];
+ LPSTR p;
+ DWORD cbBuffer = 100;
+ FILE *fp = fopen(file, "r");
+ if (fp != NULL) {
+ while (fgets(szBuffer, cbBuffer, fp) != NULL) {
+ if ((p = strstr(szBuffer, macro)) != NULL) {
+ while (*p && !isdigit(*p)) ++p;
+ d = strtod(p, NULL);
+ break;
+ }
+ }
+ fclose(fp);
+ }
+ return d;
+}
+
+int
+GetVersionFromHeader(const char *tclh, const char *tkh)
+{
+ double dTcl = 0.0, dTk = 0.0;
+
+ if (tclh != NULL)
+ dTcl = ReadVersionFromHeader(tclh, "TCL_VERSION");
+ if (tkh != NULL)
+ dTk = ReadVersionFromHeader(tkh, "TK_VERSION");
+
+ if (dTcl > 0 || dTk > 0) {
+ FILE *ofp = fopen("version.vc", "w");
+ if (dTcl > 0)
+ fprintf(ofp, "TCL_DOTVERSION\t= %0.1f\nTCL_VERSION\t= %u\n",
+ dTcl, (int)(dTcl * 10.0));
+ if (dTk > 0)
+ fprintf(ofp, "TK_DOTVERSION\t= %0.1f\nTK_VERSION\t= %u\n",
+ dTk, (int)(dTk * 10.0));
+ fclose(ofp);
+ return 0;
+ }
+ return 1;
+}
--- /dev/null
+#------------------------------------------------------------------------------
+# rules.vc --
+#
+# Microsoft Visual C++ makefile include for decoding the commandline
+# macros. This file does not need editing to build Tcl.
+#
+# This version is modified from the Tcl source version to support
+# building extensions using nmake.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# Copyright (c) 2001-2002 David Gravereaux.
+# Copyright (c) 2003 Patrick Thoyts
+#
+#------------------------------------------------------------------------------
+# RCS: @(#) $Id$
+#------------------------------------------------------------------------------
+
+!ifndef _RULES_VC
+_RULES_VC = 1
+
+cc32 = $(CC) # built-in default.
+link32 = link
+lib32 = lib
+rc32 = $(RC) # built-in default.
+
+!ifndef INSTALLDIR
+### Assume the normal default.
+_INSTALLDIR = C:\Program Files\Tcl
+!else
+### Fix the path seperators.
+_INSTALLDIR = $(INSTALLDIR:/=\)
+!endif
+
+!ifndef MACHINE
+MACHINE = IX86
+!endif
+
+!ifndef CFG_ENCODING
+CFG_ENCODING = \"cp1252\"
+!endif
+
+#----------------------------------------------------------
+# Set the proper copy method to avoid overwrite questions
+# to the user when copying files and selecting the right
+# "delete all" method.
+#----------------------------------------------------------
+
+!if "$(OS)" == "Windows_NT"
+RMDIR = rmdir /S /Q
+!if ![ver | find "4.0" > nul]
+CPY = echo y | xcopy /i
+!else
+CPY = xcopy /i /y
+!endif
+!else
+CPY = xcopy /i
+RMDIR = deltree /Y
+!endif
+
+
+!message ===============================================================================
+
+#----------------------------------------------------------
+# build the helper app we need to overcome nmake's limiting
+# environment.
+#----------------------------------------------------------
+
+!if !exist(nmakehlp.exe)
+!if [$(cc32) -nologo -ML nmakehlp.c -link -subsystem:console > nul]
+!endif
+!endif
+
+#----------------------------------------------------------
+# Test for compiler features
+#----------------------------------------------------------
+
+### test for optimizations
+!if [nmakehlp -c -Otip]
+!message *** Compiler has 'Optimizations'
+OPTIMIZING = 1
+!else
+!message *** Compiler doesn't have 'Optimizations'
+OPTIMIZING = 0
+!endif
+
+!if "$(MACHINE)" == "IX86"
+### test for pentium errata
+!if [nmakehlp -c -QI0f]
+!message *** Compiler has 'Pentium 0x0f fix'
+PENT_0F_ERRATA = 1
+!else
+!message *** Compiler doesn't have 'Pentium 0x0f fix'
+PENT_0F_ERRATA = 0
+!endif
+### test for -align:4096, when align:512 will do.
+!if [nmakehlp -l -opt:nowin98]
+!message *** Linker has 'Win98 alignment problem'
+ALIGN98_HACK = 1
+!else
+!message *** Linker doesn't have 'Win98 alignment problem'
+ALIGN98_HACK = 0
+!endif
+!else
+PENT_0F_ERRATA = 0
+ALIGN98_HACK = 0
+!endif
+
+!if "$(MACHINE)" == "IA64"
+### test for Itanium errata
+!if [nmakehlp -c -QIA64_Bx]
+!message *** Compiler has 'B-stepping errata workarounds'
+ITAN_B_ERRATA = 1
+!else
+!message *** Compiler doesn't have 'B-stepping errata workarounds'
+ITAN_B_ERRATA = 0
+!endif
+!else
+ITAN_B_ERRATA = 0
+!endif
+
+#----------------------------------------------------------
+# Decode the options requested.
+#----------------------------------------------------------
+
+!if "$(OPTS)" == "" || [nmakehlp -f "$(OPTS)" "none"]
+STATIC_BUILD = 0
+TCL_THREADS = 0
+DEBUG = 0
+PROFILE = 0
+MSVCRT = 0
+LOIMPACT = 0
+TCL_USE_STATIC_PACKAGES = 0
+USE_THREAD_ALLOC = 0
+!else
+!if [nmakehlp -f $(OPTS) "static"]
+!message *** Doing static
+STATIC_BUILD = 1
+!else
+STATIC_BUILD = 0
+!endif
+!if [nmakehlp -f $(OPTS) "msvcrt"]
+!message *** Doing msvcrt
+MSVCRT = 1
+!else
+MSVCRT = 0
+!endif
+!if [nmakehlp -f $(OPTS) "staticpkg"]
+!message *** Doing staticpkg
+TCL_USE_STATIC_PACKAGES = 1
+!else
+TCL_USE_STATIC_PACKAGES = 0
+!endif
+!if [nmakehlp -f $(OPTS) "threads"]
+!message *** Doing threads
+TCL_THREADS = 1
+!else
+TCL_THREADS = 0
+!endif
+!if [nmakehlp -f $(OPTS) "symbols"]
+!message *** Doing symbols
+DEBUG = 1
+!else
+DEBUG = 0
+!endif
+!if [nmakehlp -f $(OPTS) "profile"]
+!message *** Doing profile
+PROFILE = 1
+!else
+PROFILE = 0
+!endif
+!if [nmakehlp -f $(OPTS) "loimpact"]
+!message *** Doing loimpact
+LOIMPACT = 1
+!else
+LOIMPACT = 0
+!endif
+!if [nmakehlp -f $(OPTS) "thrdalloc"]
+!message *** Doing thrdalloc
+USE_THREAD_ALLOC = 1
+!else
+USE_THREAD_ALLOC = 0
+!endif
+!endif
+
+
+!if !$(STATIC_BUILD)
+# Make sure we don't build overly fat DLLs.
+MSVCRT = 1
+# We shouldn't statically put the extensions inside the shell when dynamic.
+TCL_USE_STATIC_PACKAGES = 0
+!endif
+
+
+#----------------------------------------------------------
+# Figure-out how to name our intermediate and output directories.
+# We wouldn't want different builds to use the same .obj files
+# by accident.
+#----------------------------------------------------------
+
+SUFX = tsgx
+
+!if $(DEBUG)
+BUILDDIRTOP = Debug
+DBGX = g
+!else
+BUILDDIRTOP = Release
+DBGX =
+SUFX = $(SUFX:g=)
+!endif
+
+TMP_DIRFULL = .\$(BUILDDIRTOP)\$(PROJECT)_ThreadedDynamicStaticX
+
+!if !$(STATIC_BUILD)
+TMP_DIRFULL = $(TMP_DIRFULL:Static=)
+SUFX = $(SUFX:s=)
+EXT = dll
+!if $(MSVCRT)
+TMP_DIRFULL = $(TMP_DIRFULL:X=)
+SUFX = $(SUFX:x=)
+!endif
+!else
+TMP_DIRFULL = $(TMP_DIRFULL:Dynamic=)
+EXT = lib
+!if !$(MSVCRT)
+TMP_DIRFULL = $(TMP_DIRFULL:X=)
+SUFX = $(SUFX:x=)
+!endif
+!endif
+
+!if !$(TCL_THREADS)
+TMP_DIRFULL = $(TMP_DIRFULL:Threaded=)
+SUFX = $(SUFX:t=)
+!endif
+
+!ifndef TMP_DIR
+TMP_DIR = $(TMP_DIRFULL)
+!ifndef OUT_DIR
+OUT_DIR = .\$(BUILDDIRTOP)
+!endif
+!else
+!ifndef OUT_DIR
+OUT_DIR = $(TMP_DIR)
+!endif
+!endif
+
+
+#----------------------------------------------------------
+# Decode the statistics requested.
+#----------------------------------------------------------
+
+!if "$(STATS)" == "" || [nmakehlp -f "$(STATS)" "none"]
+TCL_MEM_DEBUG = 0
+TCL_COMPILE_DEBUG = 0
+!else
+!if [nmakehlp -f $(STATS) "memdbg"]
+!message *** Doing memdbg
+TCL_MEM_DEBUG = 1
+!else
+TCL_MEM_DEBUG = 0
+!endif
+!if [nmakehlp -f $(STATS) "compdbg"]
+!message *** Doing compdbg
+TCL_COMPILE_DEBUG = 1
+!else
+TCL_COMPILE_DEBUG = 0
+!endif
+!endif
+
+
+#----------------------------------------------------------
+# Set our defines now armed with our options.
+#----------------------------------------------------------
+
+OPTDEFINES = -DTCL_CFGVAL_ENCODING=$(CFG_ENCODING)
+
+!if $(TCL_MEM_DEBUG)
+OPTDEFINES = -DTCL_MEM_DEBUG
+!endif
+!if $(TCL_COMPILE_DEBUG)
+OPTDEFINES = $(OPTDEFINES) -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS
+!endif
+!if $(TCL_THREADS)
+OPTDEFINES = $(OPTDEFINES) -DTCL_THREADS=1
+!if $(USE_THREAD_ALLOC)
+OPTDEFINES = $(OPTDEFINES) -DUSE_THREAD_ALLOC=1
+!endif
+!endif
+!if $(STATIC_BUILD)
+OPTDEFINES = $(OPTDEFINES) -DSTATIC_BUILD
+!endif
+
+!if $(DEBUG)
+OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_DEBUG
+!elseif $(OPTIMIZING)
+OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_OPTIMIZED
+!endif
+!if $(PROFILE)
+OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_PROFILED
+!endif
+!if "$(MACHINE)" == "IA64"
+OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_DO64BIT
+!endif
+
+
+#----------------------------------------------------------
+# Get common info used when building extensions.
+#----------------------------------------------------------
+
+!if "$(PROJECT)" != "tcl"
+
+!if !defined(TCLDIR)
+!if exist("$(_INSTALLDIR)\include\tcl.h")
+TCLINSTALL = 1
+_TCLDIR = $(_INSTALLDIR)
+_TCL_H = $(_INSTALLDIR)\include\tcl.h
+TCLDIR = $(_INSTALLDIR)
+!else
+MSG=^
+Failed to find tcl.h. Set the TCLDIR macro.
+!error $(MSG)
+!endif
+!else
+_TCLDIR = $(TCLDIR:/=\)
+!if exist("$(_TCLDIR)\include\tcl.h")
+TCLINSTALL = 1
+!elseif exist("$(_TCLDIR)\generic\tcl.h")
+TCLINSTALL = 0
+!else
+MSG =^
+Failed to find tcl.h. The TCLDIR macro does not appear correct.
+!error $(MSG)
+!endif
+_TCL_H = $(_TCLDIR)\generic\tcl.h
+!endif
+
+!if [nmakehlp -v $(_TCL_H) ""] == 0
+!include version.vc
+!else
+TCL_DOTVERSION = 8.5
+TCL_VERSION = $(TCL_DOTVERSION:.=)
+!endif
+
+!if $(TCLINSTALL)
+TCLSH = "$(_INSTALLDIR)\bin\tclsh$(TCL_VERSION)$(SUFX).exe"
+TCLSTUBLIB = "$(_INSTALLDIR)\lib\tclstub$(TCL_VERSION).lib"
+TCLIMPLIB = "$(_INSTALLDIR)\lib\tcl$(TCL_VERSION)$(SUFX).lib"
+TCL_LIBRARY = $(_INSTALLDIR)\lib
+TCLREGLIB = "$(_INSTALLDIR)\lib\tclreg11$(SUFX:t=).lib"
+TCLDDELIB = "$(_INSTALLDIR)\lib\tcldde12$(SUFX:t=).lib"
+COFFBASE = \must\have\tcl\sources\to\build\this\target
+TCLTOOLSDIR = \must\have\tcl\sources\to\build\this\target
+TCL_INCLUDES = -I"$(_INSTALLDIR)\include"
+!else
+TCLSH = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)$(SUFX).exe"
+TCLSTUBLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclstub$(TCL_VERSION).lib"
+TCLIMPLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcl$(TCL_VERSION)$(SUFX).lib"
+TCL_LIBRARY = $(_TCLDIR)\library
+TCLREGLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclreg11$(SUFX:t=).lib"
+TCLDDELIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcldde12$(SUFX:t=).lib"
+COFFBASE = "$(_TCLDIR)\win\coffbase.txt"
+TCLTOOLSDIR = $(_TCLDIR)\tools
+TCL_INCLUDES = -I"$(_TCLDIR)\generic" -I"$(_TCLDIR)\win"
+!endif
+
+!endif
+
+#----------------------------------------------------------
+# Get Tk info for building extensions.
+#----------------------------------------------------------
+
+!if "$(PROJECT)" != "tcl" && "$(PROJECT)" != "tk"
+
+!if !defined(TKDIR)
+!if exist("$(_INSTALLDIR)\include\tk.h")
+TKINSTALL = 1
+_TKDIR = $(_INSTALLDIR)
+_TK_H = $(_INSTALLDIR)\include\tk.h
+TKDIR = $(_INSTALLDIR)
+!else
+MSG =^
+Failed to find tk.h. Set the TKDIR macro.
+!error $(MSG)
+!endif
+!else
+_TKDIR = $(TKDIR:/=\)
+!if exist("$(_TKDIR)\include\tk.h")
+TKINSTALL = 1
+!elseif exist("$(_TKDIR)\generic\tk.h")
+TKINSTALL = 0
+!else
+MSG =^
+Failed to find tk.h. The TKDIR macro does not appear correct.
+!error $(MSG)
+!endif
+_TK_H = $(_TKDIR)\generic\tk.h
+!endif
+
+!if [nmakehlp -v $(_TCL_H) $(_TK_H)] == 0
+!include version.vc
+!else
+TK_DOTVERSION = 8.5
+TK_VERSION = $(TK_DOTVERSION:.=)
+!endif
+
+!if $(TKINSTALL)
+WISH = "$(_INSTALLDIR)\bin\wish$(TK_VERSION)$(SUFX).exe"
+TKSTUBLIB = "$(_INSTALLDIR)\lib\tkstub$(TK_VERSION).lib"
+TKIMPLIB = "$(_INSTALLDIR)\lib\tk$(TK_VERSION)$(SUFX).lib"
+TK_INCLUDES = -I"$(_INSTALLDIR)\include"
+!else
+WISH = "$(_TKDIR)\win\$(BUILDDIRTOP)\wish$(TCL_VERSION)$(SUFX).exe"
+TKSTUBLIB = "$(_TKDIR)\win\$(BUILDDIRTOP)\tkstub$(TCL_VERSION).lib"
+TKIMPLIB = "$(_TKDIR)\win\$(BUILDDIRTOP)\tk$(TCL_VERSION)$(SUFX).lib"
+TK_INCLUDES = -I"$(_TKDIR)\generic" -I"$(_TKDIR)\win" -I"$(_TKDIR)\xlib"
+!endif
+
+!endif
+
+
+
+#----------------------------------------------------------
+# Display stats being used.
+#----------------------------------------------------------
+
+!message *** Intermediate directory will be '$(TMP_DIR)'
+!message *** Output directory will be '$(OUT_DIR)'
+!message *** Suffix for binaries will be '$(SUFX)'
+!message *** Optional defines are '$(OPTDEFINES)'
+
+!endif
projects / tcludp / commitdiff