From: Pat Thoyts Date: Fri, 1 Sep 2017 00:38:53 +0000 (+0100) Subject: RS485 channel A should be pulled up and B down for fail-safe mode. X-Git-Url: http://privyetmir.co.uk/gitweb?a=commitdiff_plain;h=ba459e3aeb4d04e035b88f96979cda2ef8e604a2;p=electronics%2FUSB-RS485-Adapter RS485 channel A should be pulled up and B down for fail-safe mode. The previous version has this swapped and we get a spike at the end of each packet as the lines adjust to the non-driven state. --- diff --git a/usb-rs485.sch b/usb-rs485.sch index bf1e34c..82f5810 100644 --- a/usb-rs485.sch +++ b/usb-rs485.sch @@ -413,12 +413,12 @@ N -11800 50100 -11800 50300 4 N -11800 50900 -11800 51700 4 N -11800 49500 -11800 49400 4 N -11800 49400 -12200 49400 4 -N -12200 49200 -12200 51300 4 +N -12200 49200 -12200 51700 4 C -12300 48100 1 0 0 gnd-1.sym N -12200 48400 -12200 48600 4 -N -12200 52600 -12200 52900 4 +N -12400 52600 -12400 52900 4 N -13300 52700 -13300 52900 4 -N -12200 52000 -12200 51700 4 +N -12400 52000 -12400 51300 4 C -12800 44900 1 0 0 led.sym { T -12800 44900 5 10 0 0 0 0 1 @@ -667,25 +667,25 @@ manufacturer=MULTICOMP T -12300 48400 5 10 0 0 0 0 1 manufacturer_part_number=MCWR06X152 JTL } -C -12300 51800 1 0 0 res_vert.sym +C -12500 51800 1 0 0 res_vert.sym { -T -12200 54600 5 8 0 0 0 0 1 +T -12400 54600 5 8 0 0 0 0 1 device=resistor -T -12000 52000 5 8 1 1 0 0 1 +T -12200 52000 5 8 1 1 0 0 1 footprint=0603 -T -12000 52400 5 10 1 1 0 0 1 +T -12200 52400 5 10 1 1 0 0 1 refdes=R5 -T -12000 52200 5 10 1 1 0 0 1 +T -12200 52200 5 10 1 1 0 0 1 value=1K5 -T -12200 53800 5 8 0 0 0 0 1 +T -12400 53800 5 8 0 0 0 0 1 symversion=1.0 -T -12300 51800 5 10 0 0 0 0 1 +T -12500 51800 5 10 0 0 0 0 1 vendor=FARNELL -T -12300 51800 5 10 0 0 0 0 1 +T -12500 51800 5 10 0 0 0 0 1 vendor_part_number=2694727 -T -12300 51800 5 10 0 0 0 0 1 +T -12500 51800 5 10 0 0 0 0 1 manufacturer=MULTICOMP -T -12300 51800 5 10 0 0 0 0 1 +T -12500 51800 5 10 0 0 0 0 1 manufacturer_part_number=MCWR06X152 JTL } C -11900 50100 1 0 0 res_vert.sym