+2008-04-30 Pat Thoyts <patthoyts@users.sourceforge.net>
+
+ * win/makefile.vc: Updated the NMAKE build files.
+ * win/rules.vc:
+ * win/nmakehlp.c:
+
2008-04-15 Andreas Kupries <andreask@activestate.com>
* pkgIndex.tcl.in: Updated to handle the new files, and
-# Makefile.vc
+# makefile.vc -- -*- Makefile -*-
#
-# This makefile is suitable for use with # Microsoft Visual C++ 2.x and 4.0.
+# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
#
-# This makefile was hacked from Sun's 'example.zip'
-# Copyright (c) 1996 Sun Microsystems, Inc.
-# Copyright 1997 Tom Poindexter.
-# Copyright 2001 Vince Darley.
+# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to
+# make it suitable as a general package makefile. Look for the word EDIT
+# which marks sections that may need modification. As a minumum you will
+# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values
+# relevant to your package.
#
-
-!if !defined(MSDEVDIR) && !defined(MSVCDIR)
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# Copyright (c) 1995-1996 Sun Microsystems, Inc.
+# Copyright (c) 1998-2000 Ajuba Solutions.
+# Copyright (c) 2001 ActiveState Corporation.
+# Copyright (c) 2001-2002 David Gravereaux.
+# Copyright (c) 2003-2006 Pat Thoyts
+#
+#-------------------------------------------------------------------------
+# RCS: @(#)$Id$
+#-------------------------------------------------------------------------
+
+# Check to see we are configured to build with MSVC (MSDEVDIR or MSVCDIR)
+# or with the MS Platform SDK (MSSDK). Visual Studio .NET 2003 and 2005 define
+# VCINSTALLDIR instead. The MSVC Toolkit release defines yet another.
+!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(MSSDK) && !defined(VCINSTALLDIR) && !defined(VCToolkitInstallDir)
MSG = ^
-You will need to run vcvars32.bat from Developer Studio, first, to setup^
-the environment. Jump to this line to read the new instructions.
+You need to run vcvars32.bat from Developer Studio or setenv.bat from the^
+Platform SDK first to setup the environment. Jump to this line to read^
+the build instructions.
!error $(MSG)
!endif
#------------------------------------------------------------------------------
# HOW TO USE this makefile:
#
-# 1) It is now necessary to have MSVCDir set in the environment. This is used
-# as a check to see if vcvars32.bat had been run prior to running nmake or
-# during the install of Microsoft Developer Studio, MSVCDir had been set
-# globally and the PATH adjusted. Either way is valid.
+# 1) It is now necessary to have %MSVCDir% set in the environment. This is
+# used as a check to see if vcvars32.bat had been run prior to running
+# nmake or during the installation of Microsoft Visual C++, MSVCDir had
+# been set globally and the PATH adjusted. Either way is valid.
#
# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
# directory to setup the proper environment, if needed, for your current
# vcvars32.bat according to the instructions for it. This can also turn on
# the 64-bit compiler, if your SDK has it.
#
+# 3) Targets are:
+# all -- Builds everything.
+# <project> -- Builds the project (eg: nmake sample)
+# test -- Builds and runs the test suite.
+# install -- Installs the built binaries and libraries to $(INSTALLDIR)
+# in an appropriate subdirectory.
+# clean/realclean/distclean -- varying levels of cleaning.
+#
+# 4) Macros usable on the commandline:
+# INSTALLDIR=<path>
+# Sets where to install Tcl from the built binaries.
+# C:\Progra~1\Tcl is assumed when not specified.
+#
+# OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none
+# Sets special options for the core. The default is for none.
+# Any combination of the above may be used (comma separated).
+# 'none' will over-ride everything to nothing.
+#
+# static = Builds a static library of the core instead of a
+# dll. The shell will be static (and large), as well.
+# msvcrt = Effects the static option only to switch it from
+# using libcmt(d) as the C runtime [by default] to
+# msvcrt(d). This is useful for static embedding
+# support.
+# staticpkg = Effects the static option only to switch
+# tclshXX.exe to have the dde and reg extension linked
+# inside it.
+# nothreads = Turns off multithreading support (not recommended)
+# thrdalloc = Use the thread allocator (shared global free pool).
+# symbols = Adds symbols for step debugging.
+# profile = Adds profiling hooks. Map file is assumed.
+# loimpact = Adds a flag for how NT treats the heap to keep memory
+# in use, low. This is said to impact alloc performance.
+#
+# STATS=memdbg,compdbg,none
+# Sets optional memory and bytecode compiler debugging code added
+# to the core. The default is for none. Any combination of the
+# above may be used (comma separated). 'none' will over-ride
+# everything to nothing.
+#
+# memdbg = Enables the debugging memory allocator.
+# compdbg = Enables byte compilation logging.
+#
+# MACHINE=(IX86|IA64|ALPHA|AMD64)
+# Set the machine type used for the compiler, linker, and
+# resource compiler. This hook is needed to tell the tools
+# when alternate platforms are requested. IX86 is the default
+# when not specified. If the CPU environment variable has been
+# set (ie: recent Platform SDK) then MACHINE is set from CPU.
+#
+# TMP_DIR=<path>
+# OUT_DIR=<path>
+# Hooks to allow the intermediate and output directories to be
+# changed. $(OUT_DIR) is assumed to be
+# $(BINROOT)\(Release|Debug) based on if symbols are requested.
+# $(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
+#
+# TESTPAT=<file>
+# Reads the tests requested to be run from this file.
+#
+# CFG_ENCODING=encoding
+# name of encoding for configuration information. Defaults
+# to cp1252
+#
+# 5) Examples:
+#
+# Basic syntax of calling nmake looks like this:
+# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
+#
+# Standard (no frills)
+# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
+# Setting environment for using Microsoft Visual C++ tools.
+# c:\tcl_src\win\>nmake -f makefile.vc all
+# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
+#
+# Building for Win64
+# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
+# Setting environment for using Microsoft Visual C++ tools.
+# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
+# Targeting Windows pre64 RETAIL
+# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64
+#
+#------------------------------------------------------------------------------
+#==============================================================================
+###############################################################################
+#------------------------------------------------------------------------------
-MACHINE = IX86
-
-VFS_VERSION = 1.3.0
-DLL_VERSION = 13
-
-# comment the following line to compile with symbols
-NODEBUG=1
-
-!IF "$(NODEBUG)" == "1"
-DEBUGDEFINES =
-DBGX =
-DBGXMS =
-!ELSE
-DEBUGDEFINES = -DTCL_MEM_DEBUG -DUSE_TCLALLOC=0 -DPURIFY
-DBGX = g
-DBGXMS = d
-!ENDIF
-
-PROJECT = vfs$(DLL_VERSION)$(DBGX)
+!if !exist("makefile.vc")
+MSG = ^
+You must run this makefile only from the directory it is in.^
+Please `cd` to its location first.
+!error $(MSG)
+!endif
+#-------------------------------------------------------------------------
+# Project specific information (EDIT)
+#
+# You should edit this with the name and version of your project. This
+# information is used to generate the name of the package library and
+# it's install location.
+#
+# For example, the sample extension is going to build sample04.dll and
+# would install it into $(INSTALLDIR)\lib\sample04
#
-# Project directories -- these may need to be customized for your site
+# You need to specify the object files that need to be linked into your
+# binary here.
#
-# ROOT -- location of the example files.
-# MSVCDir -- location of VC++ compiler installation.
-# TCL -- location where Tcl is installed.
-# TCLLIB -- define the Tcl lib (with correct version)
+#-------------------------------------------------------------------------
-# note that the tcl vclibs should have been unpacked in $(TCL)\lib !!
+PROJECT = vfs
-ROOT = ..
-!IF "$(NODEBUG)" == "1"
-WINDIR = $(ROOT)\win\Release
-!ELSE
-WINDIR = $(ROOT)\win\Debug
-!ENDIF
+# Uncomment the following line if this is a Tk extension.
+#PROJECT_REQUIRES_TK=1
+!include "rules.vc"
+
+DOTVERSION = 1.3
+VERSION = $(DOTVERSION:.=)
+STUBPREFIX = $(PROJECT)stub
+
+DLLOBJS = \
+ $(TMP_DIR)\vfs.obj \
+ $(TMP_DIR)\tclvfs.res
+
+TCL_FILES = \
+ ftpvfs.tcl \
+ httpvfs.tcl \
+ mk4vfs.tcl \
+ starkit.tcl \
+ tarvfs.tcl \
+ tclprocvfs.tcl \
+ testvfs.tcl \
+ vfsUrl.tcl \
+ vfsUtils.cl \
+ vfslib.tcl \
+ webdavvfs.tcl \
+ zipvfs.tcl \
+ tkvfs.tcl \
+ mk4vfscompat.tcl \
+ zipvfscompat.tcl \
+ tclIndex
+
+TEMPLATEVFS = \
+ collatevfs.tcl \
+ deltavfs.tcl \
+ fishvfs.tcl \
+ globfind.tcl \
+ quotavfs.tcl \
+ tdelta.tcl \
+ templatevfs.tcl \
+ versionvfs.tcl
+
+#-------------------------------------------------------------------------
+# Target names and paths ( shouldn't need changing )
+#-------------------------------------------------------------------------
+
+BINROOT = .
+ROOT = ..
+
+PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
+PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT)
+PRJLIB = $(OUT_DIR)\$(PRJLIBNAME)
+
+PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib
+PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME)
+
+### Make sure we use backslash only.
+PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION)
+LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR)
+BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR)
+DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR)
+SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR)
+INCLUDE_INSTALL_DIR = $(_TCLDIR)\include
+
+### The following paths CANNOT have spaces in them.
GENERICDIR = $(ROOT)\generic
+WINDIR = $(ROOT)\win
LIBDIR = $(ROOT)\library
+DOCDIR = $(ROOT)\doc
+TOOLSDIR = $(ROOT)\tools
+COMPATDIR = $(ROOT)\compat
-cc32 = $(CC)
-link32 = link
-libpath32 = /LIBPATH:"$(MSVCDir)\lib"
-lib32 = lib
+#---------------------------------------------------------------------
+# Compile flags
+#---------------------------------------------------------------------
-include32 = -I"$(MSVCDir)\include"
+!if !$(DEBUG)
+!if $(OPTIMIZING)
+### This cranks the optimization level to maximize speed
+cdebug = $(OPTIMIZATIONS)
+!else
+cdebug =
+!endif
+!else if "$(MACHINE)" == "IA64" #|| "$(MACHINE)" == "AMD64"
+### Warnings are too many, can't support warnings into errors.
+cdebug = -Zi -Od $(DEBUGFLAGS)
+!else
+cdebug = -Zi -WX $(DEBUGFLAGS)
+!endif
-# point TCL and TCLLIB to your tcl distribution
+### Declarations common to all compiler options
+cwarn = $(WARNINGS) -D _CRT_SECURE_NO_DEPRECATE -D _CRT_NONSTDC_NO_DEPRECATE
+cflags = -nologo -c $(COMPILERFLAGS) $(cwarn) -Fp$(TMP_DIR)^\
-TCL = c:\progra~1\tcl
-TCLLIB = $(TCL)\lib\tclstub85.lib
-INSTALLDIR = $(TCL)\lib\vfs$(VFS_VERSION)
+!if $(MSVCRT)
+!if $(DEBUG) && !$(UNCHECKED)
+crt = -MDd
+!else
+crt = -MD
+!endif
+!else
+!if $(DEBUG) && !$(UNCHECKED)
+crt = -MTd
+!else
+crt = -MT
+!endif
+!endif
-######################################################################
-# Compile flags
-######################################################################
-
-!IF "$(NODEBUG)" == "1"
-# This cranks the optimization level to maximize speed
-cdebug = -O2 -Gs -GD
-!ELSE IF "$(MACHINE)" == "IA64"
-cdebug = -Od -Zi
-!ELSE
-cdebug = -Z7 -Od -WX
-!ENDIF
+!if !$(STATIC_BUILD)
+cflags = $(cflags) -DUSE_TCL_STUBS
+!if defined(TKSTUBLIB)
+cflags = $(cflags) -DUSE_TK_STUBS
+!endif
+!endif
-# declarations common to all compiler options
-cflags = -c -W3 -nologo -Fp$(TMPDIR)\ -YX -DBUILD_vfs
+INCLUDES = $(TCL_INCLUDES) -I"$(WINDIR)" -I"$(GENERICDIR)"
+BASE_CFLAGS = $(cflags) $(cdebug) $(crt) $(INCLUDES)
+CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE
+TCL_CFLAGS = -DPACKAGE_NAME="\"$(PROJECT)\"" \
+ -DPACKAGE_VERSION="\"$(DOTVERSION)\"" \
+ -DBUILD_$(PROJECT) $(BASE_CFLAGS) $(OPTDEFINES)
-######################################################################
+#---------------------------------------------------------------------
# Link flags
-######################################################################
+#---------------------------------------------------------------------
-!IF "$(NODEBUG)" == "1"
-ldebug = /RELEASE
-!ELSE
+!if $(DEBUG)
ldebug = -debug:full -debugtype:cv
-!ENDIF
-
-# declarations common to all linker options
-lflags = /NODEFAULTLIB /NOLOGO /MACHINE:$(MACHINE) $(libpath32)
-
-# declarations for use on Intel i386, i486, and Pentium systems
-!IF "$(MACHINE)" == "IX86"
-DLLENTRY = @12
-dlllflags = $(lflags) -entry:_DllMainCRTStartup$(DLLENTRY) -dll
-!ELSE IF "$(MACHINE)" == "IA64"
-DLLENTRY = @12
-dlllflags = $(lflags) -dll
-!ELSE
-dlllflags = $(lflags) -entry:_DllMainCRTStartup$(DLLENTRY) -dll
-!ENDIF
-
-conlflags = $(lflags) -subsystem:console -entry:mainCRTStartup
-guilflags = $(lflags) -subsystem:windows -entry:WinMainCRTStartup
-
-!IF "$(MACHINE)" == "PPC"
-libc = libc$(DBGXMS).lib
-libcdll = crtdll$(DBGXMS).lib
-!ELSE
-libc = libc$(DBGXMS).lib oldnames.lib
-libcdll = msvcrt$(DBGXMS).lib oldnames.lib
-!ENDIF
-
-baselibs = kernel32.lib $(optlibs) advapi32.lib user32.lib
-winlibs = $(baselibs) gdi32.lib comdlg32.lib winspool.lib
+!if $(MSVCRT)
+ldebug = $(ldebug) -nodefaultlib:msvcrt
+!endif
+!else
+ldebug = -release -opt:ref -opt:icf,3
+!endif
-guilibs = $(libc) $(winlibs)
-conlibs = $(libc) $(baselibs)
-guilibsdll = $(libcdll) $(winlibs)
-conlibsdll = $(libcdll) $(baselibs)
+### Declarations common to all linker options
+lflags = -nologo -machine:$(MACHINE) $(LINKERFLAGS) $(ldebug)
-VFSOBJS = \
- $(WINDIR)\vfs.obj
+!if $(PROFILE)
+lflags = $(lflags) -profile
+!endif
-#
-# Visual C++ tools
-#
+!if $(ALIGN98_HACK) && !$(STATIC_BUILD)
+### Align sections for PE size savings.
+lflags = $(lflags) -opt:nowin98
+!else if !$(ALIGN98_HACK) && $(STATIC_BUILD)
+### Align sections for speed in loading by choosing the virtual page size.
+lflags = $(lflags) -align:4096
+!endif
-PATH=$(COMMON32)/bin;$(MSVCDir)\bin;$(PATH)
+!if $(LOIMPACT)
+lflags = $(lflags) -ws:aggressive
+!endif
-cc32 = $(cc32) -I$(MSVCDir)\include
-CP = copy
-RM = del
-!if "$(OS)" == "Windows_NT"
-RMDIR = rmdir /S /Q
-!else
-RMDIR = deltree /Y
+dlllflags = $(lflags) -dll
+conlflags = $(lflags) -subsystem:console
+guilflags = $(lflags) -subsystem:windows
+!if !$(STATIC_BUILD)
+baselibs = $(TCLSTUBLIB)
+!if defined(TKSTUBLIB)
+baselibs = $(baselibs) $(TKSTUBLIB)
+!endif
!endif
-INCLUDES = \
- -I../../cvs-tcl/generic \
- -I../../cvs-tcl/win \
- -I$(MSVCDir)/include \
- -I../generic
+# Avoid 'unresolved external symbol __security_cookie' errors.
+# c.f. http://support.microsoft.com/?id=894573
+!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64"
+!if $(VCVERSION) >= 1400 && $(VCVERSION) < 1500
+baselibs = $(baselibs) bufferoverflowU.lib
+!endif
+!endif
-DEFINES = -nologo $(DEBUGDEFINES) -DUSE_TCL_STUBS \
- -DVERSION=\"$(VFS_VERSION)\"
+#---------------------------------------------------------------------
+# TclTest flags
+#---------------------------------------------------------------------
-#
-# Global makefile settings
-#
+!IF "$(TESTPAT)" != ""
+TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT)
+!ENDIF
-DLLOBJS = \
- $(WINDIR)\vfs.obj
+#---------------------------------------------------------------------
+# Project specific targets (EDIT)
+#---------------------------------------------------------------------
-# Targets
+all: setup $(PROJECT)
+$(PROJECT): setup $(OUT_DIR)\pkgIndex.tcl $(PRJLIB)
+install: install-binaries install-libraries install-docs
-all: setup $(PROJECT).dll
+test: setup $(PROJECT)
+ @set VFS_LIBRARY=$(LIBDIR:\=/)
+ @set TCL_LIBRARY=$(TCL_LIBRARY:\=/)
+ @set TCLLIBPATH=$(OUT_DIR:\=/)
+!if $(TCLINSTALL)
+ @set PATH=$(_TCLDIR)\bin;$(PATH)
+!else
+ @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH)
+!endif
+!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE"
+ $(DEBUGGER) $(TCLSH) "$(ROOT)/tests/all.tcl" $(TESTFLAGS)
+!else
+ @echo Please wait while the tests are collected...
+ $(TCLSH) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) > tests.log
+ type tests.log | more
+!endif
-test:
- tclsh84 $(ROOT)/tests/all.tcl $(TESTFLAGS)
+shell: setup $(PROJECT)
+ @set VFS_LIBRARY=$(LIBDIR:\=/)
+ @set TCL_LIBRARY=$(TCL_LIBRARY:\=/)
+ @set TCLLIBPATH=$(OUT_DIR:\=/)
+!if $(TCLINSTALL)
+ @set PATH=$(_TCLDIR)\bin;$(PATH)
+!else
+ @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH)
+!endif
+!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE"
+ $(DEBUGGER) $(TCLSH)
+!else
+ @echo Please wait while the tests are collected...
+ $(TCLSH) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) > tests.log
+ type tests.log | more
+!endif
setup:
- -@md $(WINDIR)
+ @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
+ @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)
+
+# See <tcl>/win/coffbase.txt for extension base addresses.
+$(PRJLIB): $(DLLOBJS)
+!if $(STATIC_BUILD)
+ $(lib32) -nologo -out:$@ @<<
+$**
+<<
+!else
+ $(link32) $(dlllflags) -base:0x10A70000 -out:$@ $(baselibs) @<<
+$**
+<<
+ $(_VC_MANIFEST_EMBED_DLL)
+ -@del $*.exp
+!endif
-install: $(PROJECT).dll
- -@md $(INSTALLDIR)
- $(CP) $(LIBDIR)\*.tcl $(INSTALLDIR)
- $(CP) $(LIBDIR)\tclIndex $(INSTALLDIR)
- $(CP) $(PROJECT).dll $(INSTALLDIR)\$(PROJECT).dll
+$(PRJSTUBLIB): $(PRJSTUBOBJS)
+ $(lib32) -nologo -out:$@ $(PRJSTUBOBJS)
+
+#---------------------------------------------------------------------
+# Implicit rules
+#---------------------------------------------------------------------
+
+{$(WINDIR)}.c{$(TMP_DIR)}.obj::
+ $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(GENERICDIR)}.c{$(TMP_DIR)}.obj::
+ $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(COMPATDIR)}.c{$(TMP_DIR)}.obj::
+ $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(WINDIR)}.rc{$(TMP_DIR)}.res:
+ $(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \
+ -DCOMMAVERSION=$(DOTVERSION:.=,),0,0 \
+ -DDOTVERSION=\"$(DOTVERSION)\" \
+ -DVERSION=\"$(VERSION)$(SUFX)\" \
+!if $(DEBUG)
+ -d DEBUG \
+!endif
+!if $(TCL_THREADS)
+ -d TCL_THREADS \
+!endif
+!if $(STATIC_BUILD)
+ -d STATIC_BUILD \
+!endif
+ $<
+
+.SUFFIXES:
+.SUFFIXES:.c .rc
-$(PROJECT).dll: $(DLLOBJS)
- $(link32) $(ldebug) $(dlllflags) $(TCLLIB) \
- $(guilibsdll) -out:$(PROJECT).dll $(DLLOBJS)
+#-------------------------------------------------------------------------
+# Explicit dependency rules
+#
+#-------------------------------------------------------------------------
-# Implicit Targets
+.PHONY: $(OUT_DIR)\pkgIndex.tcl
-#.c.obj:
-# $(cc32) $(cdebug) $(cflags) $(cvarsdll) $(INCLUDES) \
-# $(DEFINES) -Fo$(WINDIR)\ $<
+$(OUT_DIR)\pkgIndex.tcl: $(ROOT)\pkgIndex.tcl.in
+ nmakehlp -s << $** > $@
+@PACKAGE_NAME@ $(PROJECT)
+@PACKAGE_VERSION@ $(DOTVERSION)
+@PKG_LIB_FILE@ $(PRJLIBNAME)
+<<
-$(WINDIR)\vfs.obj: $(GENERICDIR)\vfs.c
- $(cc32) $(cdebug) $(cflags) $(cvarsdll) $(INCLUDES) \
- $(DEFINES) -Fo$(WINDIR)\ $?
+#---------------------------------------------------------------------
+# Installation. (EDIT)
+#
+# You may need to modify this section to reflect the final distribution
+# of your files and possibly to generate documentation.
+#
+#---------------------------------------------------------------------
+
+install-binaries:
+ @echo Installing binaries to '$(SCRIPT_INSTALL_DIR)'
+ @if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)"
+ @$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL
+
+install-libraries:
+ @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)'
+ @if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)"
+ @if exist $(LIBDIR) $(CPY) $(LIBDIR)\tclIndex "$(SCRIPT_INSTALL_DIR)"
+ @echo Installing package index in '$(SCRIPT_INSTALL_DIR)'
+ $(TCLSH) <<
+ set f [open $(ROOT)/pkgIndex.tcl.in r]
+ set data [read $$f]
+ close $$f
+ set data [string map {@PACKAGE_VERSION@ $(DOTVERSION) @PKG_LIB_FILE@ $(PRJLIBNAME)} $$data]
+ set f [open [file join [file normalize {$(SCRIPT_INSTALL_DIR)}] pkgIndex.tcl] w]
+ puts $$f $$data
+ close $$f
+<<
+
+install-docs:
+ @echo Installing documentation files to '$(DOC_INSTALL_DIR)'
+ @if exist $(DOCDIR) $(CPY) $(DOCDIR)\*.n "$(DOC_INSTALL_DIR)"
+
+#---------------------------------------------------------------------
+# Clean up
+#---------------------------------------------------------------------
clean:
- -$(RM) $(WINDIR)\*.obj
- -$(RMDIR) $(WINDIR)
- -$(RM) $(PROJECT).dll
- -$(RM) $(PROJECT).lib
- -$(RM) $(PROJECT).exp
+ @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR)
+ @if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc
+ @if exist $(WINDIR)\vercl.i del $(WINDIR)\vercl.i
+ @if exist $(WINDIR)\vercl.x del $(WINDIR)\vercl.x
+ @if exist $(WINDIR)\_junk.pch del $(WINDIR)\_junk.pch
+
+realclean: clean
+ @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)
+
+distclean: realclean
+ @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe
+ @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj
--- /dev/null
+/*
+ * ----------------------------------------------------------------------------
+ * nmakehlp.c --
+ *
+ * This is used to fix limitations within nmake and the environment.
+ *
+ * Copyright (c) 2002 by David Gravereaux.
+ * Copyright (c) 2006 by Pat Thoyts
+ *
+ * See the file "license.terms" for information on usage and redistribution of
+ * this file, and for a DISCLAIMER OF ALL WARRANTIES.
+ *
+ * ----------------------------------------------------------------------------
+ * RCS: @(#) $Id$
+ * ----------------------------------------------------------------------------
+ */
+
+#define _CRT_SECURE_NO_DEPRECATE
+#include <windows.h>
+#pragma comment (lib, "user32.lib")
+#pragma comment (lib, "kernel32.lib")
+#include <stdio.h>
+#include <math.h>
+
+/*
+ * This library is required for x64 builds with _some_ versions of MSVC
+ */
+#if defined(_M_IA64) || defined(_M_AMD64)
+#if _MSC_VER >= 1400 && _MSC_VER < 1500
+#pragma comment(lib, "bufferoverflowU")
+#endif
+#endif
+
+/* ISO hack for dumb VC++ */
+#ifdef _MSC_VER
+#define snprintf _snprintf
+#endif
+
+
+
+/* protos */
+
+int CheckForCompilerFeature(const char *option);
+int CheckForLinkerFeature(const char *option);
+int IsIn(const char *string, const char *substring);
+int GrepForDefine(const char *file, const char *string);
+int SubstituteFile(const char *substs, const char *filename);
+const char * GetVersionFromFile(const char *filename, const char *match);
+DWORD WINAPI ReadFromPipe(LPVOID args);
+
+/* globals */
+
+#define CHUNK 25
+#define STATICBUFFERSIZE 1000
+typedef struct {
+ HANDLE pipe;
+ char buffer[STATICBUFFERSIZE];
+} pipeinfo;
+
+pipeinfo Out = {INVALID_HANDLE_VALUE, '\0'};
+pipeinfo Err = {INVALID_HANDLE_VALUE, '\0'};
+\f
+/*
+ * exitcodes: 0 == no, 1 == yes, 2 == error
+ */
+
+int
+main(
+ int argc,
+ char *argv[])
+{
+ char msg[300];
+ DWORD dwWritten;
+ int chars;
+
+ /*
+ * Make sure children (cl.exe and link.exe) are kept quiet.
+ */
+
+ SetErrorMode(SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX);
+
+ /*
+ * Make sure the compiler and linker aren't effected by the outside world.
+ */
+
+ SetEnvironmentVariable("CL", "");
+ SetEnvironmentVariable("LINK", "");
+
+ if (argc > 1 && *argv[1] == '-') {
+ switch (*(argv[1]+1)) {
+ case 'c':
+ if (argc != 3) {
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -c <compiler option>\n"
+ "Tests for whether cl.exe supports an option\n"
+ "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+ &dwWritten, NULL);
+ return 2;
+ }
+ return CheckForCompilerFeature(argv[2]);
+ case 'l':
+ if (argc != 3) {
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -l <linker option>\n"
+ "Tests for whether link.exe supports an option\n"
+ "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+ &dwWritten, NULL);
+ return 2;
+ }
+ return CheckForLinkerFeature(argv[2]);
+ case 'f':
+ if (argc == 2) {
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -f <string> <substring>\n"
+ "Find a substring within another\n"
+ "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+ &dwWritten, NULL);
+ return 2;
+ } else if (argc == 3) {
+ /*
+ * If the string is blank, there is no match.
+ */
+
+ return 0;
+ } else {
+ return IsIn(argv[2], argv[3]);
+ }
+ case 'g':
+ if (argc == 2) {
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -g <file> <string>\n"
+ "grep for a #define\n"
+ "exitcodes: integer of the found string (no decimals)\n",
+ argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+ &dwWritten, NULL);
+ return 2;
+ }
+ return GrepForDefine(argv[2], argv[3]);
+ case 's':
+ if (argc == 2) {
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -s <substitutions file> <file>\n"
+ "Perform a set of string map type substutitions on a file\n"
+ "exitcodes: 0\n",
+ argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+ &dwWritten, NULL);
+ return 2;
+ }
+ return SubstituteFile(argv[2], argv[3]);
+ case 'V':
+ if (argc != 4) {
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -V filename matchstring\n"
+ "Extract a version from a file:\n"
+ "eg: pkgIndex.tcl \"package ifneeded http\"",
+ argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+ &dwWritten, NULL);
+ return 0;
+ }
+ printf("%s\n", GetVersionFromFile(argv[2], argv[3]));
+ return 0;
+ }
+ }
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -c|-l|-f|-g|-V ...\n"
+ "This is a little helper app to equalize shell differences between WinNT and\n"
+ "Win9x and get nmake.exe to accomplish its job.\n",
+ argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL);
+ return 2;
+}
+\f
+int
+CheckForCompilerFeature(
+ const char *option)
+{
+ STARTUPINFO si;
+ PROCESS_INFORMATION pi;
+ SECURITY_ATTRIBUTES sa;
+ DWORD threadID;
+ char msg[300];
+ BOOL ok;
+ HANDLE hProcess, h, pipeThreads[2];
+ char cmdline[100];
+
+ hProcess = GetCurrentProcess();
+
+ ZeroMemory(&pi, sizeof(PROCESS_INFORMATION));
+ ZeroMemory(&si, sizeof(STARTUPINFO));
+ si.cb = sizeof(STARTUPINFO);
+ si.dwFlags = STARTF_USESTDHANDLES;
+ si.hStdInput = INVALID_HANDLE_VALUE;
+
+ ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES));
+ sa.nLength = sizeof(SECURITY_ATTRIBUTES);
+ sa.lpSecurityDescriptor = NULL;
+ sa.bInheritHandle = FALSE;
+
+ /*
+ * Create a non-inheritible pipe.
+ */
+
+ CreatePipe(&Out.pipe, &h, &sa, 0);
+
+ /*
+ * Dupe the write side, make it inheritible, and close the original.
+ */
+
+ DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE,
+ DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+ /*
+ * Same as above, but for the error side.
+ */
+
+ CreatePipe(&Err.pipe, &h, &sa, 0);
+ DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE,
+ DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+ /*
+ * Base command line.
+ */
+
+ lstrcpy(cmdline, "cl.exe -nologo -c -TC -Zs -X -Fp.\\_junk.pch ");
+
+ /*
+ * Append our option for testing
+ */
+
+ lstrcat(cmdline, option);
+
+ /*
+ * Filename to compile, which exists, but is nothing and empty.
+ */
+
+ lstrcat(cmdline, " .\\nul");
+
+ ok = CreateProcess(
+ NULL, /* Module name. */
+ cmdline, /* Command line. */
+ NULL, /* Process handle not inheritable. */
+ NULL, /* Thread handle not inheritable. */
+ TRUE, /* yes, inherit handles. */
+ DETACHED_PROCESS, /* No console for you. */
+ NULL, /* Use parent's environment block. */
+ NULL, /* Use parent's starting directory. */
+ &si, /* Pointer to STARTUPINFO structure. */
+ &pi); /* Pointer to PROCESS_INFORMATION structure. */
+
+ if (!ok) {
+ DWORD err = GetLastError();
+ int chars = snprintf(msg, sizeof(msg) - 1,
+ "Tried to launch: \"%s\", but got error [%u]: ", cmdline, err);
+
+ FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS|
+ FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars],
+ (300-chars), 0);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg,lstrlen(msg), &err,NULL);
+ return 2;
+ }
+
+ /*
+ * Close our references to the write handles that have now been inherited.
+ */
+
+ CloseHandle(si.hStdOutput);
+ CloseHandle(si.hStdError);
+
+ WaitForInputIdle(pi.hProcess, 5000);
+ CloseHandle(pi.hThread);
+
+ /*
+ * Start the pipe reader threads.
+ */
+
+ pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID);
+ pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID);
+
+ /*
+ * Block waiting for the process to end.
+ */
+
+ WaitForSingleObject(pi.hProcess, INFINITE);
+ CloseHandle(pi.hProcess);
+
+ /*
+ * Wait for our pipe to get done reading, should it be a little slow.
+ */
+
+ WaitForMultipleObjects(2, pipeThreads, TRUE, 500);
+ CloseHandle(pipeThreads[0]);
+ CloseHandle(pipeThreads[1]);
+
+ /*
+ * Look for the commandline warning code in both streams.
+ * - in MSVC 6 & 7 we get D4002, in MSVC 8 we get D9002.
+ */
+
+ return !(strstr(Out.buffer, "D4002") != NULL
+ || strstr(Err.buffer, "D4002") != NULL
+ || strstr(Out.buffer, "D9002") != NULL
+ || strstr(Err.buffer, "D9002") != NULL
+ || strstr(Out.buffer, "D2021") != NULL
+ || strstr(Err.buffer, "D2021") != NULL);
+}
+\f
+int
+CheckForLinkerFeature(
+ const char *option)
+{
+ STARTUPINFO si;
+ PROCESS_INFORMATION pi;
+ SECURITY_ATTRIBUTES sa;
+ DWORD threadID;
+ char msg[300];
+ BOOL ok;
+ HANDLE hProcess, h, pipeThreads[2];
+ char cmdline[100];
+
+ hProcess = GetCurrentProcess();
+
+ ZeroMemory(&pi, sizeof(PROCESS_INFORMATION));
+ ZeroMemory(&si, sizeof(STARTUPINFO));
+ si.cb = sizeof(STARTUPINFO);
+ si.dwFlags = STARTF_USESTDHANDLES;
+ si.hStdInput = INVALID_HANDLE_VALUE;
+
+ ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES));
+ sa.nLength = sizeof(SECURITY_ATTRIBUTES);
+ sa.lpSecurityDescriptor = NULL;
+ sa.bInheritHandle = TRUE;
+
+ /*
+ * Create a non-inheritible pipe.
+ */
+
+ CreatePipe(&Out.pipe, &h, &sa, 0);
+
+ /*
+ * Dupe the write side, make it inheritible, and close the original.
+ */
+
+ DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE,
+ DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+ /*
+ * Same as above, but for the error side.
+ */
+
+ CreatePipe(&Err.pipe, &h, &sa, 0);
+ DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE,
+ DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+ /*
+ * Base command line.
+ */
+
+ lstrcpy(cmdline, "link.exe -nologo ");
+
+ /*
+ * Append our option for testing.
+ */
+
+ lstrcat(cmdline, option);
+
+ ok = CreateProcess(
+ NULL, /* Module name. */
+ cmdline, /* Command line. */
+ NULL, /* Process handle not inheritable. */
+ NULL, /* Thread handle not inheritable. */
+ TRUE, /* yes, inherit handles. */
+ DETACHED_PROCESS, /* No console for you. */
+ NULL, /* Use parent's environment block. */
+ NULL, /* Use parent's starting directory. */
+ &si, /* Pointer to STARTUPINFO structure. */
+ &pi); /* Pointer to PROCESS_INFORMATION structure. */
+
+ if (!ok) {
+ DWORD err = GetLastError();
+ int chars = snprintf(msg, sizeof(msg) - 1,
+ "Tried to launch: \"%s\", but got error [%u]: ", cmdline, err);
+
+ FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS|
+ FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars],
+ (300-chars), 0);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg,lstrlen(msg), &err,NULL);
+ return 2;
+ }
+
+ /*
+ * Close our references to the write handles that have now been inherited.
+ */
+
+ CloseHandle(si.hStdOutput);
+ CloseHandle(si.hStdError);
+
+ WaitForInputIdle(pi.hProcess, 5000);
+ CloseHandle(pi.hThread);
+
+ /*
+ * Start the pipe reader threads.
+ */
+
+ pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID);
+ pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID);
+
+ /*
+ * Block waiting for the process to end.
+ */
+
+ WaitForSingleObject(pi.hProcess, INFINITE);
+ CloseHandle(pi.hProcess);
+
+ /*
+ * Wait for our pipe to get done reading, should it be a little slow.
+ */
+
+ WaitForMultipleObjects(2, pipeThreads, TRUE, 500);
+ CloseHandle(pipeThreads[0]);
+ CloseHandle(pipeThreads[1]);
+
+ /*
+ * Look for the commandline warning code in the stderr stream.
+ */
+
+ return !(strstr(Out.buffer, "LNK1117") != NULL ||
+ strstr(Err.buffer, "LNK1117") != NULL ||
+ strstr(Out.buffer, "LNK4044") != NULL ||
+ strstr(Err.buffer, "LNK4044") != NULL);
+}
+\f
+DWORD WINAPI
+ReadFromPipe(
+ LPVOID args)
+{
+ pipeinfo *pi = (pipeinfo *) args;
+ char *lastBuf = pi->buffer;
+ DWORD dwRead;
+ BOOL ok;
+
+ again:
+ if (lastBuf - pi->buffer + CHUNK > STATICBUFFERSIZE) {
+ CloseHandle(pi->pipe);
+ return (DWORD)-1;
+ }
+ ok = ReadFile(pi->pipe, lastBuf, CHUNK, &dwRead, 0L);
+ if (!ok || dwRead == 0) {
+ CloseHandle(pi->pipe);
+ return 0;
+ }
+ lastBuf += dwRead;
+ goto again;
+
+ return 0; /* makes the compiler happy */
+}
+\f
+int
+IsIn(
+ const char *string,
+ const char *substring)
+{
+ return (strstr(string, substring) != NULL);
+}
+\f
+/*
+ * Find a specified #define by name.
+ *
+ * If the line is '#define TCL_VERSION "8.5"', it returns 85 as the result.
+ */
+
+int
+GrepForDefine(
+ const char *file,
+ const char *string)
+{
+ char s1[51], s2[51], s3[51];
+ FILE *f = fopen(file, "rt");
+
+ if (f == NULL) {
+ return 0;
+ }
+
+ do {
+ int r = fscanf(f, "%50s", s1);
+
+ if (r == 1 && !strcmp(s1, "#define")) {
+ /*
+ * Get next two words.
+ */
+
+ r = fscanf(f, "%50s %50s", s2, s3);
+ if (r != 2) {
+ continue;
+ }
+
+ /*
+ * Is the first word what we're looking for?
+ */
+
+ if (!strcmp(s2, string)) {
+ double d1;
+
+ fclose(f);
+
+ /*
+ * Add 1 past first double quote char. "8.5"
+ */
+
+ d1 = atof(s3 + 1); /* 8.5 */
+ while (floor(d1) != d1) {
+ d1 *= 10.0;
+ }
+ return ((int) d1); /* 85 */
+ }
+ }
+ } while (!feof(f));
+
+ fclose(f);
+ return 0;
+}
+\f
+/*
+ * GetVersionFromFile --
+ * Looks for a match string in a file and then returns the version
+ * following the match where a version is anything acceptable to
+ * package provide or package ifneeded.
+ */
+
+const char *
+GetVersionFromFile(
+ const char *filename,
+ const char *match)
+{
+ size_t cbBuffer = 100;
+ static char szBuffer[100];
+ char *szResult = NULL;
+ FILE *fp = fopen(filename, "rt");
+
+ if (fp != NULL) {
+ /*
+ * Read data until we see our match string.
+ */
+
+ while (fgets(szBuffer, cbBuffer, fp) != NULL) {
+ LPSTR p, q;
+
+ p = strstr(szBuffer, match);
+ if (p != NULL) {
+ /*
+ * Skip to first digit.
+ */
+
+ while (*p && !isdigit(*p)) {
+ ++p;
+ }
+
+ /*
+ * Find ending whitespace.
+ */
+
+ q = p;
+ while (*q && (isalnum(*q) || *q == '.')) {
+ ++q;
+ }
+
+ memcpy(szBuffer, p, q - p);
+ szBuffer[q-p] = 0;
+ szResult = szBuffer;
+ break;
+ }
+ }
+ fclose(fp);
+ }
+ return szResult;
+}
+\f
+/*
+ * List helpers for the SubstituteFile function
+ */
+
+typedef struct list_item_t {
+ struct list_item_t *nextPtr;
+ char * key;
+ char * value;
+} list_item_t;
+
+/* insert a list item into the list (list may be null) */
+static list_item_t *
+list_insert(list_item_t **listPtrPtr, const char *key, const char *value)
+{
+ list_item_t *itemPtr = malloc(sizeof(list_item_t));
+ if (itemPtr) {
+ itemPtr->key = strdup(key);
+ itemPtr->value = strdup(value);
+ itemPtr->nextPtr = NULL;
+
+ while(*listPtrPtr) {
+ listPtrPtr = &(*listPtrPtr)->nextPtr;
+ }
+ *listPtrPtr = itemPtr;
+ }
+ return itemPtr;
+}
+
+static void
+list_free(list_item_t **listPtrPtr)
+{
+ list_item_t *tmpPtr, *listPtr = *listPtrPtr;
+ while (listPtr) {
+ tmpPtr = listPtr;
+ listPtr = listPtr->nextPtr;
+ free(tmpPtr->key);
+ free(tmpPtr->value);
+ free(tmpPtr);
+ }
+}
+\f
+/*
+ * SubstituteFile --
+ * As windows doesn't provide anything useful like sed and it's unreliable
+ * to use the tclsh you are building against (consider x-platform builds -
+ * eg compiling AMD64 target from IX86) we provide a simple substitution
+ * option here to handle autoconf style substitutions.
+ * The substitution file is whitespace and line delimited. The file should
+ * consist of lines matching the regular expression:
+ * \s*\S+\s+\S*$
+ *
+ * Usage is something like:
+ * nmakehlp -S << $** > $@
+ * @PACKAGE_NAME@ $(PACKAGE_NAME)
+ * @PACKAGE_VERSION@ $(PACKAGE_VERSION)
+ * <<
+ */
+
+int
+SubstituteFile(
+ const char *substitutions,
+ const char *filename)
+{
+ size_t cbBuffer = 1024;
+ static char szBuffer[1024], szCopy[1024];
+ char *szResult = NULL;
+ list_item_t *substPtr = NULL;
+ FILE *fp, *sp;
+
+ fp = fopen(filename, "rt");
+ if (fp != NULL) {
+
+ /*
+ * Build a list of substutitions from the first filename
+ */
+
+ sp = fopen(substitutions, "rt");
+ if (sp != NULL) {
+ while (fgets(szBuffer, cbBuffer, sp) != NULL) {
+ char *ks, *ke, *vs, *ve;
+ ks = szBuffer;
+ while (ks && *ks && isspace(*ks)) ++ks;
+ ke = ks;
+ while (ke && *ke && !isspace(*ke)) ++ke;
+ vs = ke;
+ while (vs && *vs && isspace(*vs)) ++vs;
+ ve = vs;
+ while (ve && *ve && !(*ve == '\r' || *ve == '\n')) ++ve;
+ *ke = 0, *ve = 0;
+ list_insert(&substPtr, ks, vs);
+ }
+ fclose(sp);
+ }
+
+ /* debug: dump the list */
+#ifdef _DEBUG
+ {
+ int n = 0;
+ list_item_t *p = NULL;
+ for (p = substPtr; p != NULL; p = p->nextPtr, ++n) {
+ fprintf(stderr, "% 3d '%s' => '%s'\n", n, p->key, p->value);
+ }
+ }
+#endif
+
+ /*
+ * Run the substitutions over each line of the input
+ */
+
+ while (fgets(szBuffer, cbBuffer, fp) != NULL) {
+ list_item_t *p = NULL;
+ for (p = substPtr; p != NULL; p = p->nextPtr) {
+ char *m = strstr(szBuffer, p->key);
+ if (m) {
+ char *cp, *op, *sp;
+ cp = szCopy;
+ op = szBuffer;
+ while (op != m) *cp++ = *op++;
+ sp = p->value;
+ while (sp && *sp) *cp++ = *sp++;
+ op += strlen(p->key);
+ while (*op) *cp++ = *op++;
+ *cp = 0;
+ memcpy(szBuffer, szCopy, sizeof(szCopy));
+ }
+ }
+ printf(szBuffer);
+ }
+
+ list_free(&substPtr);
+ }
+ fclose(fp);
+ return 0;
+}
+
+/*
+ * Local variables:
+ * mode: c
+ * c-basic-offset: 4
+ * fill-column: 78
+ * indent-tabs-mode: t
+ * tab-width: 8
+ * End:
+ */
--- /dev/null
+#------------------------------------------------------------------------------
+# rules.vc --
+#
+# Microsoft Visual C++ makefile include for decoding the commandline
+# macros. This file does not need editing to build Tcl.
+#
+# This version is modified from the Tcl source version to support
+# building extensions using nmake.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# Copyright (c) 2001-2002 David Gravereaux.
+# Copyright (c) 2003-2008 Patrick Thoyts
+#
+#------------------------------------------------------------------------------
+# RCS: @(#) $Id$
+#------------------------------------------------------------------------------
+
+!ifndef _RULES_VC
+_RULES_VC = 1
+
+cc32 = $(CC) # built-in default.
+link32 = link
+lib32 = lib
+rc32 = $(RC) # built-in default.
+
+!ifndef INSTALLDIR
+### Assume the normal default.
+_INSTALLDIR = C:\Program Files\Tcl
+!else
+### Fix the path separators.
+_INSTALLDIR = $(INSTALLDIR:/=\)
+!endif
+
+!ifndef MACHINE
+!if "$(CPU)" == "" || "$(CPU)" == "i386"
+MACHINE = IX86
+!else
+MACHINE = $(CPU)
+!endif
+!endif
+
+!ifndef CFG_ENCODING
+CFG_ENCODING = \"cp1252\"
+!endif
+
+#----------------------------------------------------------
+# Set the proper copy method to avoid overwrite questions
+# to the user when copying files and selecting the right
+# "delete all" method.
+#----------------------------------------------------------
+
+!if "$(OS)" == "Windows_NT"
+RMDIR = rmdir /S /Q
+ERRNULL = 2>NUL
+!if ![ver | find "4.0" > nul]
+CPY = echo y | xcopy /i >NUL
+COPY = copy >NUL
+!else
+CPY = xcopy /i /y >NUL
+COPY = copy /y >NUL
+!endif
+!else # "$(OS)" != "Windows_NT"
+CPY = xcopy /i >_JUNK.OUT # On Win98 NUL does not work here.
+COPY = copy >_JUNK.OUT # On Win98 NUL does not work here.
+RMDIR = deltree /Y
+NULL = \NUL # Used in testing directory existence
+ERRNULL = >NUL # Win9x shell cannot redirect stderr
+!endif
+MKDIR = mkdir
+
+!message ===============================================================================
+
+#----------------------------------------------------------
+# build the helper app we need to overcome nmake's limiting
+# environment.
+#----------------------------------------------------------
+
+!if !exist(nmakehlp.exe)
+!if [$(cc32) -nologo nmakehlp.c -link -subsystem:console > nul]
+!endif
+!endif
+
+#----------------------------------------------------------
+# Test for compiler features
+#----------------------------------------------------------
+
+### test for optimizations
+!if [nmakehlp -c -Ot]
+!message *** Compiler has 'Optimizations'
+OPTIMIZING = 1
+!else
+!message *** Compiler does not have 'Optimizations'
+OPTIMIZING = 0
+!endif
+
+OPTIMIZATIONS =
+
+!if [nmakehlp -c -Ot]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -Ot
+!endif
+
+!if [nmakehlp -c -Oi]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -Oi
+!endif
+
+!if [nmakehlp -c -Op]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -Op
+!endif
+
+!if [nmakehlp -c -fp:strict]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -fp:strict
+!endif
+
+!if [nmakehlp -c -Gs]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -Gs
+!endif
+
+!if [nmakehlp -c -GS]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -GS
+!endif
+
+!if [nmakehlp -c -GL]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -GL
+!endif
+
+DEBUGFLAGS =
+
+!if [nmakehlp -c -RTC1]
+DEBUGFLAGS = $(DEBUGFLAGS) -RTC1
+!elseif [nmakehlp -c -GZ]
+DEBUGFLAGS = $(DEBUGFLAGS) -GZ
+!endif
+
+COMPILERFLAGS =-W3
+
+# In v13 -GL and -YX are incompatible.
+!if [nmakehlp -c -YX]
+!if ![nmakehlp -c -GL]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -YX
+!endif
+!endif
+
+!if "$(MACHINE)" == "IX86"
+### test for pentium errata
+!if [nmakehlp -c -QI0f]
+!message *** Compiler has 'Pentium 0x0f fix'
+COMPILERFLAGS = $(COMPILERFLAGSS) -QI0f
+!else
+!message *** Compiler does not have 'Pentium 0x0f fix'
+!endif
+!endif
+
+!if "$(MACHINE)" == "IA64"
+### test for Itanium errata
+!if [nmakehlp -c -QIA64_Bx]
+!message *** Compiler has 'B-stepping errata workarounds'
+COMPILERFLAGS = $(COMPILERFLAGS) -QIA64_Bx
+!else
+!message *** Compiler does not have 'B-stepping errata workarounds'
+!endif
+!endif
+
+!if "$(MACHINE)" == "IX86"
+### test for -align:4096, when align:512 will do.
+!if [nmakehlp -l -opt:nowin98]
+!message *** Linker has 'Win98 alignment problem'
+ALIGN98_HACK = 1
+!else
+!message *** Linker does not have 'Win98 alignment problem'
+ALIGN98_HACK = 0
+!endif
+!else
+ALIGN98_HACK = 0
+!endif
+
+LINKERFLAGS =
+
+!if [nmakehlp -l -ltcg]
+LINKERFLAGS =-ltcg
+!endif
+
+#----------------------------------------------------------
+# MSVC8 (ships with Visual Studio 2005) generates a manifest
+# file that we should link into the binaries. This is how.
+#----------------------------------------------------------
+
+_VC_MANIFEST_EMBED_EXE=
+_VC_MANIFEST_EMBED_DLL=
+VCVER=0
+!if ![echo VCVERSION=_MSC_VER > vercl.x] \
+ && ![cl -nologo -TC -P vercl.x $(ERRNULL)]
+!include vercl.i
+!if $(VCVERSION) >= 1500
+VCVER=9
+!elseif $(VCVERSION) >= 1400
+VCVER=8
+!elseif $(VCVERSION) >= 1300
+VCVER=7
+!elseif $(VCVERSION) >= 1200
+VCVER=6
+!endif
+!endif
+
+# Since MSVC8 we must deal with manifest resources.
+!if $(VCVERSION) >= 1400
+_VC_MANIFEST_EMBED_EXE=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1
+_VC_MANIFEST_EMBED_DLL=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2
+!endif
+
+#----------------------------------------------------------
+# Decode the options requested.
+#----------------------------------------------------------
+
+!if "$(OPTS)" == "" || [nmakehlp -f "$(OPTS)" "none"]
+STATIC_BUILD = 0
+TCL_THREADS = 1
+DEBUG = 0
+PROFILE = 0
+MSVCRT = 0
+LOIMPACT = 0
+TCL_USE_STATIC_PACKAGES = 0
+USE_THREAD_ALLOC = 1
+USE_THREAD_STORAGE = 1
+UNCHECKED = 0
+!else
+!if [nmakehlp -f $(OPTS) "static"]
+!message *** Doing static
+STATIC_BUILD = 1
+!else
+STATIC_BUILD = 0
+!endif
+!if [nmakehlp -f $(OPTS) "msvcrt"]
+!message *** Doing msvcrt
+MSVCRT = 1
+!else
+MSVCRT = 0
+!endif
+!if [nmakehlp -f $(OPTS) "staticpkg"]
+!message *** Doing staticpkg
+TCL_USE_STATIC_PACKAGES = 1
+!else
+TCL_USE_STATIC_PACKAGES = 0
+!endif
+!if [nmakehlp -f $(OPTS) "nothreads"]
+!message *** Compile explicitly for non-threaded tcl
+TCL_THREADS = 0
+!else
+TCL_THREADS = 1
+!endif
+!if [nmakehlp -f $(OPTS) "symbols"]
+!message *** Doing symbols
+DEBUG = 1
+!else
+DEBUG = 0
+!endif
+!if [nmakehlp -f $(OPTS) "profile"]
+!message *** Doing profile
+PROFILE = 1
+!else
+PROFILE = 0
+!endif
+!if [nmakehlp -f $(OPTS) "loimpact"]
+!message *** Doing loimpact
+LOIMPACT = 1
+!else
+LOIMPACT = 0
+!endif
+!if [nmakehlp -f $(OPTS) "thrdalloc"]
+!message *** Doing thrdalloc
+USE_THREAD_ALLOC = 1
+!else
+USE_THREAD_ALLOC = 0
+!endif
+!if [nmakehlp -f $(OPTS) "thrdstorage"]
+!message *** Doing thrdstorage
+USE_THREAD_STORAGE = 1
+!else
+USE_THREAD_STORAGE = 0
+!endif
+!if [nmakehlp -f $(OPTS) "unchecked"]
+!message *** Doing unchecked
+UNCHECKED = 1
+!else
+UNCHECKED = 0
+!endif
+!endif
+
+
+!if !$(STATIC_BUILD)
+# Make sure we don't build overly fat DLLs.
+MSVCRT = 1
+# We shouldn't statically put the extensions inside the shell when dynamic.
+TCL_USE_STATIC_PACKAGES = 0
+!endif
+
+
+#----------------------------------------------------------
+# Figure-out how to name our intermediate and output directories.
+# We wouldn't want different builds to use the same .obj files
+# by accident.
+#----------------------------------------------------------
+
+#----------------------------------------
+# Naming convention:
+# t = full thread support.
+# s = static library (as opposed to an
+# import library)
+# g = linked to the debug enabled C
+# run-time.
+# x = special static build when it
+# links to the dynamic C run-time.
+#----------------------------------------
+SUFX = sgx
+
+!if $(DEBUG)
+BUILDDIRTOP = Debug
+!else
+BUILDDIRTOP = Release
+!endif
+
+!if "$(MACHINE)" != "IX86"
+BUILDDIRTOP =$(BUILDDIRTOP)_$(MACHINE)
+!endif
+!if $(VCVER) > 6
+BUILDDIRTOP =$(BUILDDIRTOP)_VC$(VCVER)
+!endif
+
+!if !$(DEBUG) || $(DEBUG) && $(UNCHECKED)
+SUFX = $(SUFX:g=)
+!endif
+
+TMP_DIRFULL = .\$(BUILDDIRTOP)\$(PROJECT)_ThreadedDynamicStaticX
+
+!if !$(STATIC_BUILD)
+TMP_DIRFULL = $(TMP_DIRFULL:Static=)
+SUFX = $(SUFX:s=)
+EXT = dll
+!if $(MSVCRT)
+TMP_DIRFULL = $(TMP_DIRFULL:X=)
+SUFX = $(SUFX:x=)
+!endif
+!else
+TMP_DIRFULL = $(TMP_DIRFULL:Dynamic=)
+EXT = lib
+!if !$(MSVCRT)
+TMP_DIRFULL = $(TMP_DIRFULL:X=)
+SUFX = $(SUFX:x=)
+!endif
+!endif
+
+!if !$(TCL_THREADS)
+TMP_DIRFULL = $(TMP_DIRFULL:Threaded=)
+SUFX = $(SUFX:t=)
+!endif
+
+!ifndef TMP_DIR
+TMP_DIR = $(TMP_DIRFULL)
+!ifndef OUT_DIR
+OUT_DIR = .\$(BUILDDIRTOP)
+!endif
+!else
+!ifndef OUT_DIR
+OUT_DIR = $(TMP_DIR)
+!endif
+!endif
+
+
+#----------------------------------------------------------
+# Decode the statistics requested.
+#----------------------------------------------------------
+
+!if "$(STATS)" == "" || [nmakehlp -f "$(STATS)" "none"]
+TCL_MEM_DEBUG = 0
+TCL_COMPILE_DEBUG = 0
+!else
+!if [nmakehlp -f $(STATS) "memdbg"]
+!message *** Doing memdbg
+TCL_MEM_DEBUG = 1
+!else
+TCL_MEM_DEBUG = 0
+!endif
+!if [nmakehlp -f $(STATS) "compdbg"]
+!message *** Doing compdbg
+TCL_COMPILE_DEBUG = 1
+!else
+TCL_COMPILE_DEBUG = 0
+!endif
+!endif
+
+
+#----------------------------------------------------------
+# Decode the checks requested.
+#----------------------------------------------------------
+
+!if "$(CHECKS)" == "" || [nmakehlp -f "$(CHECKS)" "none"]
+TCL_NO_DEPRECATED = 0
+WARNINGS = -W3
+!else
+!if [nmakehlp -f $(CHECKS) "nodep"]
+!message *** Doing nodep check
+TCL_NO_DEPRECATED = 1
+!else
+TCL_NO_DEPRECATED = 0
+!endif
+!if [nmakehlp -f $(CHECKS) "fullwarn"]
+!message *** Doing full warnings check
+WARNINGS = -W4
+!if [nmakehlp -l -warn:3]
+LINKERFLAGS = $(LINKERFLAGS) -warn:3
+!endif
+!else
+WARNINGS = -W3
+!endif
+!if [nmakehlp -f $(CHECKS) "64bit"] && [nmakehlp -c -Wp64]
+!message *** Doing 64bit portability warnings
+WARNINGS = $(WARNINGS) -Wp64
+!endif
+!endif
+
+#----------------------------------------------------------
+# Set our defines now armed with our options.
+#----------------------------------------------------------
+
+OPTDEFINES = -DTCL_CFGVAL_ENCODING=$(CFG_ENCODING) -DSTDC_HEADERS
+
+!if $(TCL_MEM_DEBUG)
+OPTDEFINES = $(OPTDEFINES) -DTCL_MEM_DEBUG
+!endif
+!if $(TCL_COMPILE_DEBUG)
+OPTDEFINES = $(OPTDEFINES) -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS
+!endif
+!if $(TCL_THREADS)
+OPTDEFINES = $(OPTDEFINES) -DTCL_THREADS=1
+!if $(USE_THREAD_ALLOC)
+OPTDEFINES = $(OPTDEFINES) -DUSE_THREAD_ALLOC=1
+!endif
+!if $(USE_THREAD_STORAGE)
+OPTDEFINES = $(OPTDEFINES) -DUSE_THREAD_STORAGE=1
+!endif
+!endif
+!if $(STATIC_BUILD)
+OPTDEFINES = $(OPTDEFINES) -DSTATIC_BUILD
+!endif
+!if $(TCL_NO_DEPRECATED)
+OPTDEFINES = $(OPTDEFINES) -DTCL_NO_DEPRECATED
+!endif
+
+!if $(DEBUG)
+OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_DEBUG
+!elseif $(OPTIMIZING)
+OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_OPTIMIZED
+!endif
+!if $(PROFILE)
+OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_PROFILED
+!endif
+!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64"
+OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_DO64BIT
+!endif
+
+
+#----------------------------------------------------------
+# Get common info used when building extensions.
+#----------------------------------------------------------
+
+!if "$(PROJECT)" != "tcl"
+
+# If INSTALLDIR set to tcl root dir then reset to the lib dir.
+!if exist("$(_INSTALLDIR)\include\tcl.h")
+_INSTALLDIR=$(_INSTALLDIR)\lib
+!endif
+
+!if !defined(TCLDIR)
+!if exist("$(_INSTALLDIR)\..\include\tcl.h")
+TCLINSTALL = 1
+_TCLDIR = $(_INSTALLDIR)\..
+_TCL_H = $(_INSTALLDIR)\..\include\tcl.h
+TCLDIR = $(_INSTALLDIR)\..
+!else
+MSG=^
+Failed to find tcl.h. Set the TCLDIR macro.
+!error $(MSG)
+!endif
+!else
+_TCLDIR = $(TCLDIR:/=\)
+!if exist("$(_TCLDIR)\include\tcl.h")
+TCLINSTALL = 1
+_TCL_H = $(_TCLDIR)\include\tcl.h
+!elseif exist("$(_TCLDIR)\generic\tcl.h")
+TCLINSTALL = 0
+_TCL_H = $(_TCLDIR)\generic\tcl.h
+!else
+MSG =^
+Failed to find tcl.h. The TCLDIR macro does not appear correct.
+!error $(MSG)
+!endif
+!endif
+
+!if [echo REM = This file is generated from rules.vc > version.vc]
+!endif
+!if exist("$(_TCL_H)")
+!if [echo TCL_DOTVERSION = \>> version.vc] \
+ && [nmakehlp -V "$(_TCL_H)" TCL_VERSION >> version.vc]
+!endif
+!endif
+!include version.vc
+TCL_VERSION = $(TCL_DOTVERSION:.=)
+
+!if $(TCLINSTALL)
+TCLSH = "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)$(SUFX).exe"
+!if !exist($(TCLSH)) && $(TCL_THREADS)
+TCLSH = "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)t$(SUFX).exe"
+!endif
+TCLSTUBLIB = "$(_TCLDIR)\lib\tclstub$(TCL_VERSION).lib"
+TCLIMPLIB = "$(_TCLDIR)\lib\tcl$(TCL_VERSION)$(SUFX).lib"
+TCL_LIBRARY = $(_TCLDIR)\lib
+TCL_INCLUDES = -I"$(_TCLDIR)\include"
+!else
+TCLSH = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)$(SUFX).exe"
+!if !exist($(TCLSH)) && $(TCL_THREADS)
+TCLSH = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)t$(SUFX).exe"
+!endif
+TCLSTUBLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclstub$(TCL_VERSION).lib"
+TCLIMPLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcl$(TCL_VERSION)$(SUFX).lib"
+TCL_LIBRARY = $(_TCLDIR)\library
+TCL_INCLUDES = -I"$(_TCLDIR)\generic" -I"$(_TCLDIR)\win"
+!endif
+
+!endif
+
+#----------------------------------------------------------
+# Optionally check for Tk info for building extensions.
+#----------------------------------------------------------
+
+!ifdef PROJECT_REQUIRES_TK
+!if "$(PROJECT)" != "tcl" && "$(PROJECT)" != "tk"
+
+!if !defined(TKDIR)
+!if exist("$(_INSTALLDIR)\..\include\tk.h")
+TKINSTALL = 1
+_TKDIR = $(_INSTALLDIR)\..
+_TK_H = $(_TKDIR)\include\tk.h
+TKDIR = $(_TKDIR)
+!elseif exist("$(_TCLDIR)\include\tk.h")
+TKINSTALL = 1
+_TKDIR = $(_TCLDIR)
+_TK_H = $(_TKDIR)\include\tk.h
+TKDIR = $(_TKDIR)
+!endif
+!else
+_TKDIR = $(TKDIR:/=\)
+!if exist("$(_TKDIR)\include\tk.h")
+TKINSTALL = 1
+_TK_H = $(_TKDIR)\include\tk.h
+!elseif exist("$(_TKDIR)\generic\tk.h")
+TKINSTALL = 0
+_TK_H = $(_TKDIR)\generic\tk.h
+!else
+MSG =^
+Failed to find tk.h. The TKDIR macro does not appear correct.
+!error $(MSG)
+!endif
+!endif
+
+!if defined(TKDIR)
+TK_DOTVERSION = 8.4
+!if exist("$(_TK_H)")
+!if [echo TK_DOTVERSION = \>> version.vc] \
+ && [nmakehlp -V "$(_TK_H)" TK_VERSION >> version.vc]
+!endif
+!endif
+!include version.vc
+TK_VERSION = $(TK_DOTVERSION:.=)
+
+!if $(TKINSTALL)
+WISH = "$(_TKDIR)\bin\wish$(TK_VERSION)$(SUFX).exe"
+!if !exist($(WISH)) && $(TCL_THREADS)
+WISH = "$(_TKDIR)\bin\wish$(TK_VERSION)t$(SUFX).exe"
+!endif
+TKSTUBLIB = "$(_TKDIR)\lib\tkstub$(TK_VERSION).lib"
+TKIMPLIB = "$(_TKDIR)\lib\tk$(TK_VERSION)$(SUFX).lib"
+TK_INCLUDES = -I"$(_TKDIR)\include"
+TK_LIBRARY = $(_TKDIR)\lib
+!else
+WISH = "$(_TKDIR)\win\$(BUILDDIRTOP)\wish$(TCL_VERSION)$(SUFX).exe"
+!if !exist($(WISH)) && $(TCL_THREADS)
+WISH = "$(_TKDIR)\win\$(BUILDDIRTOP)\wish$(TCL_VERSION)t$(SUFX).exe"
+!endif
+TKSTUBLIB = "$(_TKDIR)\win\$(BUILDDIRTOP)\tkstub$(TCL_VERSION).lib"
+TKIMPLIB = "$(_TKDIR)\win\$(BUILDDIRTOP)\tk$(TCL_VERSION)$(SUFX).lib"
+TK_INCLUDES = -I"$(_TKDIR)\generic" -I"$(_TKDIR)\win" -I"$(_TKDIR)\xlib"
+TK_LIBRARY = $(_TKDIR)\library
+!endif
+
+!endif
+!endif
+!endif
+
+#----------------------------------------------------------
+# Display stats being used.
+#----------------------------------------------------------
+
+!message *** Intermediate directory will be '$(TMP_DIR)'
+!message *** Output directory will be '$(OUT_DIR)'
+!message *** Suffix for binaries will be '$(SUFX)'
+!message *** Optional defines are '$(OPTDEFINES)'
+!message *** Compiler version $(VCVER). Target machine is $(MACHINE)
+!message *** Compiler options '$(COMPILERFLAGS) $(OPTIMIZATIONS) $(DEBUGFLAGS) $(WARNINGS)'
+!message *** Link options '$(LINKERFLAGS)'
+
+!endif
--- /dev/null
+// tclvfs.rc - Copyright (C) 2008 Pat Thoyts <patthoyts@users.sf.net>
+//
+// Note: the version numbers in here are all provided from the makefile.
+// No editing required.
+//
+// $Id$
+
+#include <winver.h>
+
+VS_VERSION_INFO VERSIONINFO
+ FILEVERSION COMMAVERSION
+ PRODUCTVERSION COMMAVERSION
+ FILEFLAGSMASK 0x3fL
+#ifdef DEBUG
+ FILEFLAGS VS_FF_DEBUG
+#else
+ FILEFLAGS 0x0L
+#endif
+ FILEOS VOS__WINDOWS32
+ FILETYPE VFT_DLL
+ FILESUBTYPE 0x0L
+BEGIN
+ BLOCK "StringFileInfo"
+ BEGIN
+ BLOCK "040904b0" /* LANG_ENGLISH/SUBLANG_ENGLISH_US, Unicode CP */
+ BEGIN
+ VALUE "FileDescription", "Tcl virtual filesystem support\0"
+ VALUE "OriginalFilename", "vfs" VERSION ".dll\0"
+ VALUE "FileVersion", DOTVERSION "\0"
+ VALUE "LegalCopyright", "Copyright \251 2001 Vince Darley et al.\0"
+ VALUE "ProductName", "TclVfs " DOTVERSION " for Windows\0"
+ VALUE "ProductVersion", DOTVERSION "\0"
+ VALUE "Comments", "http://sourceforge.net/projects/tclvfs\0"
+ END
+ END
+ BLOCK "VarFileInfo"
+ BEGIN
+ VALUE "Translation", 0x409, 1200
+ END
+END
projects / tclvfs / commitdiff