From 78326ff3175dab18e92b3794f4ce682ebe4cd9ea Mon Sep 17 00:00:00 2001 From: Pat Thoyts Date: Fri, 17 Jun 2005 13:11:36 +0000 Subject: [PATCH] Initial revision --- Makefile.in | 432 ++ README | 49 + aclocal.m4 | 52 + configure | 11352 ++++++++++++++++++++++++++++++++++ configure.in | 195 + demos/Fmonitor.tcl | 89 + generic/tclFileMonitor.c | 400 ++ generic/tclFileMonitor.h | 71 + license.terms | 38 + tclconfig/ChangeLog | 412 ++ tclconfig/README.txt | 26 + tclconfig/install-sh | 119 + tclconfig/tcl.m4 | 3858 ++++++++++++ tests/all.tcl | 58 + tests/filemonitor.test | 167 + unix/tclUnixFileMonitor.c | 382 ++ unix/tclUnixFileMonitorKQ.c | 309 + win/Filemonitor.dsp | 101 + win/Filemonitor.rc | 45 + win/makefile.vc | 420 ++ win/nmakehlp.c | 355 ++ win/rules.vc | 436 ++ win/tclWinFileMonitor.c | 311 + 23 files changed, 19677 insertions(+) create mode 100644 Makefile.in create mode 100644 README create mode 100644 aclocal.m4 create mode 100755 configure create mode 100755 configure.in create mode 100644 demos/Fmonitor.tcl create mode 100644 generic/tclFileMonitor.c create mode 100644 generic/tclFileMonitor.h create mode 100644 license.terms create mode 100644 tclconfig/ChangeLog create mode 100644 tclconfig/README.txt create mode 100644 tclconfig/install-sh create mode 100644 tclconfig/tcl.m4 create mode 100644 tests/all.tcl create mode 100644 tests/filemonitor.test create mode 100644 unix/tclUnixFileMonitor.c create mode 100644 unix/tclUnixFileMonitorKQ.c create mode 100644 win/Filemonitor.dsp create mode 100644 win/Filemonitor.rc create mode 100644 win/makefile.vc create mode 100644 win/nmakehlp.c create mode 100644 win/rules.vc create mode 100644 win/tclWinFileMonitor.c diff --git a/Makefile.in b/Makefile.in new file mode 100644 index 0000000..85f01fb --- /dev/null +++ b/Makefile.in @@ -0,0 +1,432 @@ +# Makefile.in -- +# +# This file is a Makefile for Filemonitor extension. If it has the name +# "Makefile.in" then it is a template for a Makefile; to generate the +# actual Makefile, run "./configure", which is a configuration script +# generated by the "autoconf" program (constructs like "@foo@" will get +# replaced in the actual Makefile. +# +# Copyright (c) 1999 Scriptics Corporation. +# Copyright (c) 2002-2003 ActiveState Corporation. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# RCS: @(#) $Id$ + +#======================================================================== +# Add additional lines to handle any additional AC_SUBST cases that +# have been added in a customized configure script. +#======================================================================== + +#SAMPLE_NEW_VAR = @SAMPLE_NEW_VAR@ + +#======================================================================== +# Nothing of the variables below this line should need to be changed. +# Please check the TARGETS section below to make sure the make targets +# are correct. +#======================================================================== + +#======================================================================== +# The names of the source files is defined in the configure script. +# The object files are used for linking into the final library. +# This will be used when a dist target is added to the Makefile. +# It is not important to specify the directory, as long as it is the +# $(srcdir) or in the generic, win or unix subdirectory. +#======================================================================== + +PKG_SOURCES = @PKG_SOURCES@ +PKG_OBJECTS = @PKG_OBJECTS@ + +PKG_STUB_SOURCES = @PKG_STUB_SOURCES@ +PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@ + +#======================================================================== +# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with +# this package that need to be installed, if any. +#======================================================================== + +PKG_TCL_SOURCES = @PKG_TCL_SOURCES@ + +#======================================================================== +# This is a list of public header files to be installed, if any. +#======================================================================== + +PKG_HEADERS = @PKG_HEADERS@ + +#======================================================================== +# "PKG_LIB_FILE" refers to the library (dynamic or static as per +# configuration options) composed of the named objects. +#======================================================================== + +PKG_LIB_FILE = @PKG_LIB_FILE@ +PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@ + +lib_BINARIES = $(PKG_LIB_FILE) +BINARIES = $(lib_BINARIES) + +SHELL = @SHELL@ + +srcdir = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +libdir = @libdir@ +datadir = @datadir@ +mandir = @mandir@ +includedir = @includedir@ + +DESTDIR = + +PKG_DIR = $(PACKAGE_NAME)$(PACKAGE_VERSION) +pkgdatadir = $(datadir)/$(PKG_DIR) +pkglibdir = $(libdir)/$(PKG_DIR) +pkgincludedir = $(includedir)/$(PKG_DIR) + +top_builddir = . + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ + +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +CC = @CC@ +CFLAGS_DEFAULT = @CFLAGS_DEFAULT@ +CFLAGS_WARNING = @CFLAGS_WARNING@ +CLEANFILES = @CLEANFILES@ +EXEEXT = @EXEEXT@ +LDFLAGS_DEFAULT = @LDFLAGS_DEFAULT@ +MAKE_LIB = @MAKE_LIB@ +MAKE_SHARED_LIB = @MAKE_SHARED_LIB@ +MAKE_STATIC_LIB = @MAKE_STATIC_LIB@ +MAKE_STUB_LIB = @MAKE_STUB_LIB@ +OBJEXT = @OBJEXT@ +RANLIB = @RANLIB@ +RANLIB_STUB = @RANLIB_STUB@ +SHLIB_CFLAGS = @SHLIB_CFLAGS@ +SHLIB_LD = @SHLIB_LD@ +SHLIB_LD_FLAGS = @SHLIB_LD_FLAGS@ +SHLIB_LD_LIBS = @SHLIB_LD_LIBS@ +STLIB_LD = @STLIB_LD@ +TCL_DEFS = @TCL_DEFS@ +TCL_BIN_DIR = @TCL_BIN_DIR@ +TCL_SRC_DIR = @TCL_SRC_DIR@ +# This is necessary for packages that use private Tcl headers +#TCL_TOP_DIR_NATIVE = @TCL_TOP_DIR_NATIVE@ +# Not used, but retained for reference of what libs Tcl required +TCL_LIBS = @TCL_LIBS@ + +#======================================================================== +# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our +# package without installing. The other environment variables allow us +# to test against an uninstalled Tcl. Add special env vars that you +# require for testing here (like TCLX_LIBRARY). +#======================================================================== + +EXTRA_PATH = $(top_builddir):$(TCL_BIN_DIR) +TCLSH_ENV = TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library` \ + @LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \ + PATH="$(EXTRA_PATH):$(PATH)" \ + TCLLIBPATH="$(top_builddir)" +TCLSH_PROG = @TCLSH_PROG@ +TCLSH = $(TCLSH_ENV) $(TCLSH_PROG) +SHARED_BUILD = @SHARED_BUILD@ + +INCLUDES = @PKG_INCLUDES@ @TCL_INCLUDES@ + +PKG_CFLAGS = @PKG_CFLAGS@ + +# TCL_DEFS is not strictly need here, but if you remove it, then you +# must make sure that configure.in checks for the necessary components +# that your library may use. TCL_DEFS can actually be a problem if +# you do not compile with a similar machine setup as the Tcl core was +# compiled with. +#DEFS = $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS) +DEFS = @DEFS@ $(PKG_CFLAGS) + +CONFIG_CLEAN_FILES = Makefile + +CPPFLAGS = @CPPFLAGS@ +LIBS = @PKG_LIBS@ @LIBS@ +AR = ar +CFLAGS = @CFLAGS@ +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + +#======================================================================== +# Start of user-definable TARGETS section +#======================================================================== + +#======================================================================== +# TEA TARGETS. Please note that the "libraries:" target refers to platform +# independent files, and the "binaries:" target inclues executable programs and +# platform-dependent libraries. Modify these targets so that they install +# the various pieces of your package. The make and install rules +# for the BINARIES that you specified above have already been done. +#======================================================================== + +all: binaries libraries doc + +#======================================================================== +# The binaries target builds executable programs, Windows .dll's, unix +# shared/static libraries, and any other platform-dependent files. +# The list of targets to build for "binaries:" is specified at the top +# of the Makefile, in the "BINARIES" variable. +#======================================================================== + +binaries: $(BINARIES) pkgIndex.tcl + +libraries: + +doc: + @echo "If you have documentation to create, place the commands to" + @echo "build the docs in the 'doc:' target. For example:" + @echo " xml2nroff sample.xml > sample.n" + @echo " xml2html sample.xml > sample.html" + +install: all install-binaries install-libraries install-doc + +install-binaries: binaries install-lib-binaries install-bin-binaries + +#======================================================================== +# This rule installs platform-independent files, such as header files. +# The list=...; for p in $$list handles the empty list case x-platform. +#======================================================================== + +install-libraries: libraries + @mkdir -p $(DESTDIR)$(includedir) + @echo "Installing header files in $(DESTDIR)$(includedir)" + @list='$(PKG_HEADERS)'; for i in $$list; do \ + echo "Installing $(srcdir)/$$i" ; \ + $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \ + done; + +#======================================================================== +# Install documentation. Unix manpages should go in the $(mandir) +# directory. +#======================================================================== + +install-doc: doc + @mkdir -p $(DESTDIR)$(mandir)/mann + @echo "Installing documentation in $(DESTDIR)$(mandir)" + @list='$(srcdir)/doc/*.n'; for i in $$list; do \ + echo "Installing $$i"; \ + rm -f $(DESTDIR)$(mandir)/mann/`basename $$i`; \ + $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \ + done + +test: binaries libraries + $(TCLSH) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS) + +shell: binaries libraries + @$(TCLSH) $(SCRIPT) + +gdb: + $(TCLSH_ENV) gdb $(TCLSH_PROG) $(SCRIPT) + +depend: + +#======================================================================== +# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable +# mentioned above. That will ensure that this target is built when you +# run "make binaries". +# +# The $(PKG_OBJECTS) objects are created and linked into the final +# library. In most cases these object files will correspond to the +# source files above. +#======================================================================== + +$(PKG_LIB_FILE): $(PKG_OBJECTS) + -rm -f $(PKG_LIB_FILE) + ${MAKE_LIB} + $(RANLIB) $(PKG_LIB_FILE) + +$(PKG_STUB_LIB_FILE): $(PKG_STUB_OBJECTS) + -rm -f $(PKG_STUB_LIB_FILE) + ${MAKE_STUB_LIB} + $(RANLIB_STUB) $(PKG_STUB_LIB_FILE) + +#======================================================================== +# We need to enumerate the list of .c to .o lines here. +# +# In the following lines, $(srcdir) refers to the toplevel directory +# containing your extension. If your sources are in a subdirectory, +# you will have to modify the paths to reflect this: +# +# sample.$(OBJEXT): $(srcdir)/generic/sample.c +# $(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@ +# +# Setting the VPATH variable to a list of paths will cause the makefile +# to look into these paths when resolving .c to .obj dependencies. +# As necessary, add $(srcdir):$(srcdir)/compat:.... +#======================================================================== + +VPATH = $(srcdir):$(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win + +.c.@OBJEXT@: + $(COMPILE) -c `@CYGPATH@ $<` -o $@ + +#======================================================================== +# Create the pkgIndex.tcl file. +# It is usually easiest to let Tcl do this for you with pkg_mkIndex, but +# you may find that you need to customize the package. If so, either +# modify the -hand version, or create a pkgIndex.tcl.in file and have +# the configure script output the pkgIndex.tcl by editing configure.in. +#======================================================================== + +pkgIndex.tcl: + ( echo pkg_mkIndex . $(PKG_LIB_FILE) \; exit; ) | $(TCLSH) + +pkgIndex.tcl-hand: + (echo 'package ifneeded $(PACKAGE_NAME) $(PACKAGE_VERSION) \ + [list load [file join $$dir $(PKG_LIB_FILE)]]'\ + ) > pkgIndex.tcl + +#======================================================================== +# Distribution creation +# You may need to tweak this target to make it work correctly. +#======================================================================== + +#COMPRESS = tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar +COMPRESS = gtar zcvf $(PKG_DIR).tar.gz $(PKG_DIR) +DIST_ROOT = /tmp/dist +DIST_DIR = $(DIST_ROOT)/$(PKG_DIR) + +dist-clean: + rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.* + +dist: dist-clean + mkdir -p $(DIST_DIR) + cp -p $(srcdir)/ChangeLog $(srcdir)/README* $(srcdir)/license* \ + $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/*.in \ + $(DIST_DIR)/ + chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4 + chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in + + cp -p $(srcdir)/*.[ch] $(DIST_DIR)/ + + mkdir $(DIST_DIR)/tclconfig + cp $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \ + $(DIST_DIR)/tclconfig/ + chmod 664 $(DIST_DIR)/tclconfig/tcl.m4 + chmod +x $(DIST_DIR)/tclconfig/install-sh + + list='demos doc generic library mac tests unix win'; \ + for p in $$list; do \ + if test -d $(srcdir)/$$p ; then \ + mkdir $(DIST_DIR)/$$p; \ + cp -p $(srcdir)/$$p/*.* $(DIST_DIR)/$$p/; \ + fi; \ + done + + (cd $(DIST_ROOT); $(COMPRESS);) + +#======================================================================== +# End of user-definable section +#======================================================================== + +#======================================================================== +# Don't modify the file to clean here. Instead, set the "CLEANFILES" +# variable in configure.in +#======================================================================== + +clean: + -test -z "$(BINARIES)" || rm -f $(BINARIES) + -rm -f *.$(OBJEXT) core *.core + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean: clean + -rm -f *.tab.c + -rm -f $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log config.status + +#======================================================================== +# Install binary object libraries. On Windows this includes both .dll and +# .lib files. Because the .lib files are not explicitly listed anywhere, +# we need to deduce their existence from the .dll file of the same name. +# Library files go into the lib directory. +# In addition, this will generate the pkgIndex.tcl +# file in the install location (assuming it can find a usable tclsh shell) +# +# You should not have to modify this target. +#======================================================================== + +install-lib-binaries: + @mkdir -p $(DESTDIR)$(pkglibdir) + @list='$(lib_BINARIES)'; for p in $$list; do \ + if test -f $$p; then \ + echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p"; \ + $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p; \ + stub=`echo $$p|sed -e "s/.*\(stub\).*/\1/"`; \ + if test "x$$stub" = "xstub"; then \ + echo " $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p"; \ + $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p; \ + else \ + echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \ + $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \ + fi; \ + ext=`echo $$p|sed -e "s/.*\.//"`; \ + if test "x$$ext" = "xdll"; then \ + lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \ + if test -f $$lib; then \ + echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; \ + $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \ + fi; \ + fi; \ + fi; \ + done + @list='$(PKG_TCL_SOURCES)'; for p in $$list; do \ + if test -f $(srcdir)/$$p; then \ + destp=`basename $$p`; \ + echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \ + $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \ + fi; \ + done + @if test "x$(SHARED_BUILD)" = "x1"; then \ + echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \ + $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \ + fi + +#======================================================================== +# Install binary executables (e.g. .exe files and dependent .dll files) +# This is for files that must go in the bin directory (located next to +# wish and tclsh), like dependent .dll files on Windows. +# +# You should not have to modify this target, except to define bin_BINARIES +# above if necessary. +#======================================================================== + +install-bin-binaries: + @mkdir -p $(DESTDIR)$(bindir) + @list='$(bin_BINARIES)'; for p in $$list; do \ + if test -f $$p; then \ + echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \ + $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \ + fi; \ + done + +.SUFFIXES: .c .$(OBJEXT) + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status + +uninstall-binaries: + list='$(lib_BINARIES)'; for p in $$list; do \ + rm -f $(DESTDIR)$(pkglibdir)/$$p; \ + done + list='$(PKG_TCL_SOURCES)'; for p in $$list; do \ + p=`basename $$p`; \ + rm -f $(DESTDIR)$(pkglibdir)/$$p; \ + done + list='$(bin_BINARIES)'; for p in $$list; do \ + rm -f $(DESTDIR)$(bindir)/$$p; \ + done + +.PHONY: all binaries clean depend distclean doc install libraries test + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/README b/README new file mode 100644 index 0000000..af6c97b --- /dev/null +++ b/README @@ -0,0 +1,49 @@ + File and Directory Monitoring + ----------------------------- + +This package provides an abstract interface to directory change +notifications. File system directories can be monitored for +modifications by polling at intervals and using the stat() call to +identify modified files. However, there are a number of more efficient +systems available to avoid polling. Linux provides dnotify, the *BSDs +use kqueue and Win32 has FindFirstChangeNotification and +friends. There are also the imon and FAM packages. + +TODO +---- + +This package needs to support kqueue and imon and also provide a compatible +pure-Tcl polling interface. Hopefully we can come up with a suitably general +interface supported by all these systems. + +Usage +----- + + filemonitor create modify /tmp {puts "/tmp modified"} + filemonitor delete $monitor + filemonitor names + +Building under unix +------------------- + + ./configure + make + make test + make install + +Building for Windows (using mingw gcc) +-------------------------------------- + + This has been tested using Mingw and Msys. Follow the unix build + instructions. + +Building for Windows (using MSVC 6.0) +------------------------------------- + + Ensure you have run the VCVARS32.BAT file to setup your environment. + + cd win + nmake -f Makefile.vc TCLDIR=c:\opt\tcl OPTS=none + nmake -f Makefile.vc TCLDIR=c:\opt\tcl OPTS=none test + nmake -f Makefile.vc TCLDIR=c:\opt\tcl OPTS=none install + diff --git a/aclocal.m4 b/aclocal.m4 new file mode 100644 index 0000000..6754398 --- /dev/null +++ b/aclocal.m4 @@ -0,0 +1,52 @@ +# +# Include the TEA standard macro set +# + +builtin(include,tclconfig/tcl.m4) + +# +# Add here whatever m4 macros you want to define for your package +# + +#------------------------------------------------------------------------- +# TEA_ENABLE_DNOTIFY -- +# +# Check for F_NOTIFY support - defines HAVE_F_NOTIFY +# +AC_DEFUN(TEA_ENABLE_DNOTIFY, [ +dnl# AC_CHECK_HEADERS(fcntl.h) + + AC_MSG_CHECKING(for F_NOTIFY) + AC_TRY_COMPILE([ +#define _GNU_SOURCE +#include +], [ fcntl(0, F_NOTIFY, DN_MODIFY); ], + [have_f_notify=yes; AC_DEFINE(HAVE_F_NOTIFY)],[have_f_notify=no]) + AC_MSG_RESULT([$have_f_notify]) +]) + +#------------------------------------------------------------------------- +# TEA_ENABLE_KQUEUE -- +# +# Check for kqueue support - defines HAVE_KQUEUE +# +AC_DEFUN(TEA_ENABLE_KQUEUE, [ +dnl# AC_CHECK_HEADERS(sys/types.h) +dnl# AC_CHECK_HEADERS(sys/event.h) +dnl# AC_CHECK_HEADERS(sys/time.h) + + AC_MSG_CHECKING(for kqueue) + AC_TRY_COMPILE([ +#include +#include +#include +],[ + struct kevent kev; + int kq, n; + kq = kqueue(); + n = kevent(kq, NULL, 0, &kev, 1, NULL); +],[have_kqueue=yes; AC_DEFINE(HAVE_KQUEUE)],[have_kqueue=no]) + AC_MSG_RESULT([$have_kqueue]) +]) + +dnl# end \ No newline at end of file diff --git a/configure b/configure new file mode 100755 index 0000000..4521353 --- /dev/null +++ b/configure @@ -0,0 +1,11352 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.59 for filemonitor 0.6. +# +# Copyright (C) 2003 Free Software Foundation, Inc. +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +exec 6>&1 + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_config_libobj_dir=. +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Maximum number of lines to put in a shell here document. +# This variable seems obsolete. It should probably be removed, and +# only ac_max_sed_lines should be used. +: ${ac_max_here_lines=38} + +# Identity of this package. +PACKAGE_NAME='filemonitor' +PACKAGE_TARNAME='filemonitor' +PACKAGE_VERSION='0.6' +PACKAGE_STRING='filemonitor 0.6' +PACKAGE_BUGREPORT='' + +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#if HAVE_SYS_TYPES_H +# include +#endif +#if HAVE_SYS_STAT_H +# include +#endif +#if STDC_HEADERS +# include +# include +#else +# if HAVE_STDLIB_H +# include +# endif +#endif +#if HAVE_STRING_H +# if !STDC_HEADERS && HAVE_MEMORY_H +# include +# endif +# include +#endif +#if HAVE_STRINGS_H +# include +#endif +#if HAVE_INTTYPES_H +# include +#else +# if HAVE_STDINT_H +# include +# endif +#endif +#if HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS CYGPATH EXEEXT PKG_LIB_FILE PKG_STUB_LIB_FILE PKG_STUB_SOURCES PKG_STUB_OBJECTS PKG_TCL_SOURCES PKG_HEADERS PKG_INCLUDES PKG_LIBS PKG_CFLAGS TCL_VERSION TCL_BIN_DIR TCL_SRC_DIR TCL_LIB_FILE TCL_LIB_FLAG TCL_LIB_SPEC TCL_STUB_LIB_FILE TCL_STUB_LIB_FLAG TCL_STUB_LIB_SPEC TCL_LIBS TCL_DEFS TCL_EXTRA_CFLAGS TCL_LD_FLAGS TCL_SHLIB_LD_LIBS CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC OBJEXT CPP INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA SET_MAKE RANLIB ac_ct_RANLIB EGREP MATH_LIBS PKG_SOURCES PKG_OBJECTS CLEANFILES TCL_INCLUDES TCL_THREADS SHARED_BUILD AR TCLSH_PROG CELIB_DIR LIBOBJS DL_LIBS CFLAGS_DEBUG CFLAGS_OPTIMIZE CFLAGS_WARNING STLIB_LD SHLIB_LD SHLIB_CFLAGS SHLIB_LD_LIBS LDFLAGS_DEBUG LDFLAGS_OPTIMIZE LD_LIBRARY_PATH_VAR TCL_DBGX CFLAGS_DEFAULT LDFLAGS_DEFAULT MAKE_LIB MAKE_SHARED_LIB MAKE_STATIC_LIB MAKE_STUB_LIB RANLIB_STUB LTLIBOBJS' +ac_subst_files='' + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +ac_prev= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_option in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + eval "enable_$ac_feature=no" ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "enable_$ac_feature='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package| sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "with_$ac_package='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/-/_/g'` + eval "with_$ac_package=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` + eval "$ac_envvar='$ac_optarg'" + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi + +# Be sure to have absolute paths. +for ac_var in exec_prefix prefix +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* | NONE | '' ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# Be sure to have absolute paths. +for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ + localstatedir libdir includedir oldincludedir infodir mandir +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_confdir=`(dirname "$0") 2>/dev/null || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 + { (exit 1); exit 1; }; } + else + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } + fi +fi +(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } +srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +ac_env_build_alias_set=${build_alias+set} +ac_env_build_alias_value=$build_alias +ac_cv_env_build_alias_set=${build_alias+set} +ac_cv_env_build_alias_value=$build_alias +ac_env_host_alias_set=${host_alias+set} +ac_env_host_alias_value=$host_alias +ac_cv_env_host_alias_set=${host_alias+set} +ac_cv_env_host_alias_value=$host_alias +ac_env_target_alias_set=${target_alias+set} +ac_env_target_alias_value=$target_alias +ac_cv_env_target_alias_set=${target_alias+set} +ac_cv_env_target_alias_value=$target_alias +ac_env_CC_set=${CC+set} +ac_env_CC_value=$CC +ac_cv_env_CC_set=${CC+set} +ac_cv_env_CC_value=$CC +ac_env_CFLAGS_set=${CFLAGS+set} +ac_env_CFLAGS_value=$CFLAGS +ac_cv_env_CFLAGS_set=${CFLAGS+set} +ac_cv_env_CFLAGS_value=$CFLAGS +ac_env_LDFLAGS_set=${LDFLAGS+set} +ac_env_LDFLAGS_value=$LDFLAGS +ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +ac_cv_env_LDFLAGS_value=$LDFLAGS +ac_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_env_CPPFLAGS_value=$CPPFLAGS +ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_cv_env_CPPFLAGS_value=$CPPFLAGS +ac_env_CPP_set=${CPP+set} +ac_env_CPP_value=$CPP +ac_cv_env_CPP_set=${CPP+set} +ac_cv_env_CPP_value=$CPP + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures filemonitor 0.6 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +_ACEOF + + cat <<_ACEOF +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --infodir=DIR info documentation [PREFIX/info] + --mandir=DIR man documentation [PREFIX/man] +_ACEOF + + cat <<\_ACEOF +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of filemonitor 0.6:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-threads build with threads + --enable-shared build and link with shared libraries --enable-shared + --enable-64bit enable 64bit support (where applicable) + --enable-64bit-vis enable 64bit Sparc VIS support + --enable-wince enable Win/CE support (where applicable) + --disable-load disallow dynamic loading and "load" command + --enable-symbols build with debugging symbols --disable-symbols + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-tcl directory containing tcl configuration (tclConfig.sh) + --with-tclinclude directory containing the public Tcl header files + --with-celib=DIR use Windows/CE support library from DIR + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have + headers in a nonstandard directory + CPP C preprocessor + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +_ACEOF +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d $ac_dir || continue + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + cd $ac_dir + # Check for guested configure; otherwise get Cygnus style configure. + if test -f $ac_srcdir/configure.gnu; then + echo + $SHELL $ac_srcdir/configure.gnu --help=recursive + elif test -f $ac_srcdir/configure; then + echo + $SHELL $ac_srcdir/configure --help=recursive + elif test -f $ac_srcdir/configure.ac || + test -f $ac_srcdir/configure.in; then + echo + $ac_configure --help + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi + cd "$ac_popdir" + done +fi + +test -n "$ac_init_help" && exit 0 +if $ac_init_version; then + cat <<\_ACEOF +filemonitor configure 0.6 +generated by GNU Autoconf 2.59 + +Copyright (C) 2003 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit 0 +fi +exec 5>config.log +cat >&5 <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by filemonitor $as_me 0.6, which was +generated by GNU Autoconf 2.59. Invocation command line was + + $ $0 $@ + +_ACEOF +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_sep= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Be sure not to use single quotes in there, as some shells, +# such as our DU 5.0 friend, will then `close' the trap. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +{ + (set) 2>&1 | + case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in + *ac_space=\ *) + sed -n \ + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" + ;; + *) + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------- ## +## Output files. ## +## ------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + sed "/^$/d" confdefs.h | sort + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core && + rm -rf conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status + ' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo >confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . $cache_file;; + *) . ./$cache_file;; + esac + fi +else + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in `(set) 2>&1 | + sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val="\$ac_cv_env_${ac_var}_value" + eval ac_new_val="\$ac_env_${ac_var}_value" + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + + + + + + + + + + + + + + + + + + + + + + + +#-------------------------------------------------------------------- +# Call TEA_INIT as the first TEA_ macro to set up initial vars. +# This will define a ${TEA_PLATFORM} variable == "unix" or "windows" +# as well as PKG_LIB_FILE and PKG_STUB_LIB_FILE. +#-------------------------------------------------------------------- + + + # TEA extensions pass this us the version of TEA they think they + # are compatible with. + TEA_VERSION="3.2" + + echo "$as_me:$LINENO: checking for correct TEA configuration" >&5 +echo $ECHO_N "checking for correct TEA configuration... $ECHO_C" >&6 + if test x"${PACKAGE_NAME}" = x ; then + { { echo "$as_me:$LINENO: error: +The PACKAGE_NAME variable must be defined by your TEA configure.in" >&5 +echo "$as_me: error: +The PACKAGE_NAME variable must be defined by your TEA configure.in" >&2;} + { (exit 1); exit 1; }; } + fi + if test x"3.2" = x ; then + { { echo "$as_me:$LINENO: error: +TEA version not specified." >&5 +echo "$as_me: error: +TEA version not specified." >&2;} + { (exit 1); exit 1; }; } + elif test "3.2" != "${TEA_VERSION}" ; then + echo "$as_me:$LINENO: result: warning: requested TEA version \"3.2\", have \"${TEA_VERSION}\"" >&5 +echo "${ECHO_T}warning: requested TEA version \"3.2\", have \"${TEA_VERSION}\"" >&6 + else + echo "$as_me:$LINENO: result: ok (TEA ${TEA_VERSION})" >&5 +echo "${ECHO_T}ok (TEA ${TEA_VERSION})" >&6 + fi + case "`uname -s`" in + *win32*|*WIN32*|*CYGWIN_NT*|*CYGWIN_9*|*CYGWIN_ME*|*MINGW32_*) + # Extract the first word of "cygpath", so it can be a program name with args. +set dummy cygpath; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CYGPATH+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CYGPATH"; then + ac_cv_prog_CYGPATH="$CYGPATH" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CYGPATH="cygpath -w" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_CYGPATH" && ac_cv_prog_CYGPATH="echo" +fi +fi +CYGPATH=$ac_cv_prog_CYGPATH +if test -n "$CYGPATH"; then + echo "$as_me:$LINENO: result: $CYGPATH" >&5 +echo "${ECHO_T}$CYGPATH" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *) + CYGPATH=echo + EXEEXT="" + TEA_PLATFORM="unix" + ;; + esac + + # Check if exec_prefix is set. If not use fall back to prefix. + # Note when adjusted, so that TEA_PREFIX can correct for this. + # This is needed for recursive configures, since autoconf propagates + # $prefix, but not $exec_prefix (doh!). + if test x$exec_prefix = xNONE ; then + exec_prefix_default=yes + exec_prefix=$prefix + fi + + + + + # This package name must be replaced statically for AC_SUBST to work + + # Substitute STUB_LIB_FILE in case package creates a stub library too. + + + # We AC_SUBST these here to ensure they are subst'ed, + # in case the user doesn't call TEA_ADD_... + + + + + + + + + +ac_aux_dir= +for ac_dir in tclconfig $srcdir/tclconfig; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f $ac_dir/shtool; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in tclconfig $srcdir/tclconfig" >&5 +echo "$as_me: error: cannot find install-sh or install.sh in tclconfig $srcdir/tclconfig" >&2;} + { (exit 1); exit 1; }; } +fi +ac_config_guess="$SHELL $ac_aux_dir/config.guess" +ac_config_sub="$SHELL $ac_aux_dir/config.sub" +ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + + +#-------------------------------------------------------------------- +# Load the tclConfig.sh file +#-------------------------------------------------------------------- + + + + # + # Ok, lets find the tcl configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tcl + # + + if test x"${no_tcl}" = x ; then + # we reset no_tcl in case something fails here + no_tcl=true + +# Check whether --with-tcl or --without-tcl was given. +if test "${with_tcl+set}" = set; then + withval="$with_tcl" + with_tclconfig=${withval} +fi; + echo "$as_me:$LINENO: checking for Tcl configuration" >&5 +echo $ECHO_N "checking for Tcl configuration... $ECHO_C" >&6 + if test "${ac_cv_c_tclconfig+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + + # First check to see if --with-tcl was specified. + if test x"${with_tclconfig}" != x ; then + case ${with_tclconfig} in + */tclConfig.sh ) + if test -f ${with_tclconfig}; then + { echo "$as_me:$LINENO: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&5 +echo "$as_me: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&2;} + with_tclconfig=`echo ${with_tclconfig} | sed 's!/tclConfig\.sh$!!'` + fi ;; + esac + if test -f "${with_tclconfig}/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)` + else + { { echo "$as_me:$LINENO: error: ${with_tclconfig} directory doesn't contain tclConfig.sh" >&5 +echo "$as_me: error: ${with_tclconfig} directory doesn't contain tclConfig.sh" >&2;} + { (exit 1); exit 1; }; } + fi + fi + + # then check for a private Tcl installation + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ../tcl \ + `ls -dr ../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ../tcl[8-9].[0-9] 2>/dev/null` \ + `ls -dr ../tcl[8-9].[0-9]* 2>/dev/null` \ + ../../tcl \ + `ls -dr ../../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ../../tcl[8-9].[0-9] 2>/dev/null` \ + `ls -dr ../../tcl[8-9].[0-9]* 2>/dev/null` \ + ../../../tcl \ + `ls -dr ../../../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ../../../tcl[8-9].[0-9] 2>/dev/null` \ + `ls -dr ../../../tcl[8-9].[0-9]* 2>/dev/null` ; do + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd $i/unix; pwd)` + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + ; do + if test -f "$i/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd $i; pwd)` + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ${srcdir}/../tcl \ + `ls -dr ${srcdir}/../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[8-9].[0-9] 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[8-9].[0-9]* 2>/dev/null` ; do + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd $i/unix; pwd)` + break + fi + done + fi + +fi + + + if test x"${ac_cv_c_tclconfig}" = x ; then + TCL_BIN_DIR="# no Tcl configs found" + { echo "$as_me:$LINENO: WARNING: \"Cannot find Tcl configuration definitions\"" >&5 +echo "$as_me: WARNING: \"Cannot find Tcl configuration definitions\"" >&2;} + exit 0 + else + no_tcl= + TCL_BIN_DIR=${ac_cv_c_tclconfig} + echo "$as_me:$LINENO: result: found $TCL_BIN_DIR/tclConfig.sh" >&5 +echo "${ECHO_T}found $TCL_BIN_DIR/tclConfig.sh" >&6 + fi + fi + + + echo "$as_me:$LINENO: checking for existence of $TCL_BIN_DIR/tclConfig.sh" >&5 +echo $ECHO_N "checking for existence of $TCL_BIN_DIR/tclConfig.sh... $ECHO_C" >&6 + + if test -f "$TCL_BIN_DIR/tclConfig.sh" ; then + echo "$as_me:$LINENO: result: loading" >&5 +echo "${ECHO_T}loading" >&6 + . $TCL_BIN_DIR/tclConfig.sh + else + echo "$as_me:$LINENO: result: file not found" >&5 +echo "${ECHO_T}file not found" >&6 + fi + + # + # If the TCL_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TCL_LIB_SPEC will be set to the value + # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC + # instead of TCL_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + # + + if test -f $TCL_BIN_DIR/Makefile ; then + TCL_LIB_SPEC=${TCL_BUILD_LIB_SPEC} + TCL_STUB_LIB_SPEC=${TCL_BUILD_STUB_LIB_SPEC} + TCL_STUB_LIB_PATH=${TCL_BUILD_STUB_LIB_PATH} + fi + + # + # eval is required to do the TCL_DBGX substitution + # + + eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" + eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" + eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" + + eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" + eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" + eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" + + + + + + + + + + + + + + + + + + + #AC_SUBST(TCL_BUILD_LIB_SPEC) + #AC_SUBST(TCL_BUILD_STUB_LIB_SPEC) + + +#-------------------------------------------------------------------- +# Load the tkConfig.sh file if necessary (Tk extension) +#-------------------------------------------------------------------- + +#TEA_PATH_TKCONFIG +#TEA_LOAD_TKCONFIG + +#----------------------------------------------------------------------- +# Handle the --prefix=... option by defaulting to what Tcl gave. +# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER. +#----------------------------------------------------------------------- + + + if test "${prefix}" = "NONE"; then + prefix_default=yes + if test x"${TCL_PREFIX}" != x; then + { echo "$as_me:$LINENO: --prefix defaulting to TCL_PREFIX ${TCL_PREFIX}" >&5 +echo "$as_me: --prefix defaulting to TCL_PREFIX ${TCL_PREFIX}" >&6;} + prefix=${TCL_PREFIX} + else + { echo "$as_me:$LINENO: --prefix defaulting to /usr/local" >&5 +echo "$as_me: --prefix defaulting to /usr/local" >&6;} + prefix=/usr/local + fi + fi + if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \ + -o x"${exec_prefix_default}" = x"yes" ; then + if test x"${TCL_EXEC_PREFIX}" != x; then + { echo "$as_me:$LINENO: --exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}" >&5 +echo "$as_me: --exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}" >&6;} + exec_prefix=${TCL_EXEC_PREFIX} + else + { echo "$as_me:$LINENO: --exec-prefix defaulting to ${prefix}" >&5 +echo "$as_me: --exec-prefix defaulting to ${prefix}" >&6;} + exec_prefix=$prefix + fi + fi + + +#----------------------------------------------------------------------- +# Standard compiler checks. +# This sets up CC by using the CC env var, or looks for gcc otherwise. +# This also calls AC_PROG_CC, AC_PROG_INSTALL and a few others to create +# the basic setup necessary to compile executables. +#----------------------------------------------------------------------- + + + # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE) + # in this macro, they need to go into TEA_SETUP_COMPILER instead. + + # If the user did not set CFLAGS, set it now to keep + # the AC_PROG_CC macro from adding "-g -O2". + if test "${CFLAGS+set}" != "set" ; then + CFLAGS="" + fi + + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$ac_ct_CC" && break +done + + CC=$ac_ct_CC +fi + +fi + + +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + +# Provide some information about the compiler. +echo "$as_me:$LINENO:" \ + "checking for C compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 + (eval $ac_compiler --version &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 + (eval $ac_compiler -v &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 + (eval $ac_compiler -V &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 +ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 + (eval $ac_link_default) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Find the output, starting from the most likely. This scheme is +# not robust to junk in `.', hence go to wildcards (a.*) only as a last +# resort. + +# Be careful to initialize this variable, since it used to be cached. +# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +ac_cv_exeext= +# b.out is created by i960 compilers. +for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) + ;; + conftest.$ac_ext ) + # This is the source file. + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + # FIXME: I believe we export ac_cv_exeext for Libtool, + # but it would be cool to find out if it's true. Does anybody + # maintain Libtool? --akim. + export ac_cv_exeext + break;; + * ) + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; } +fi + +ac_exeext=$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_file" >&5 +echo "${ECHO_T}$ac_file" >&6 + +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + fi +fi +echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + +rm -f a.out a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +echo "$as_me:$LINENO: result: $cross_compiling" >&5 +echo "${ECHO_T}$cross_compiling" >&6 + +echo "$as_me:$LINENO: checking for suffix of executables" >&5 +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + export ac_cv_exeext + break;; + * ) break;; + esac +done +else + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +echo "${ECHO_T}$ac_cv_exeext" >&6 + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +echo "$as_me:$LINENO: checking for suffix of object files" >&5 +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 +if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +echo "${ECHO_T}$ac_cv_objext" >&6 +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_compiler_gnu=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +GCC=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +CFLAGS="-g" +echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_prog_cc_g=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_stdc=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std1 is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std1. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_stdc=$ac_arg +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC + +fi + +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + +# Some people use a C++ compiler to compile C. Since we use `exit', +# in C++ we need to declare it. In case someone uses the same compiler +# for both compiling C and C++ we need to have the C++ compiler decide +# the declaration of exit, since it's the most demanding environment. +cat >conftest.$ac_ext <<_ACEOF +#ifndef __cplusplus + choke me +#endif +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + '' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +#include +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +continue +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done +rm -f conftest* +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +echo "$as_me:$LINENO: result: $CPP" >&5 +echo "${ECHO_T}$CPP" >&6 +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + # Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + done + done + ;; +esac +done + + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL=$ac_install_sh + fi +fi +echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + + + #-------------------------------------------------------------------- + # Checks to see if the make program sets the $MAKE variable. + #-------------------------------------------------------------------- + + echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` +if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.make <<\_ACEOF +all: + @echo 'ac_maketemp="$(MAKE)"' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftest.make +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + SET_MAKE= +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + SET_MAKE="MAKE=${MAKE-make}" +fi + + + #-------------------------------------------------------------------- + # Find ranlib + #-------------------------------------------------------------------- + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + RANLIB=$ac_ct_RANLIB +else + RANLIB="$ac_cv_prog_RANLIB" +fi + + + #-------------------------------------------------------------------- + # Determines the correct binary file extension (.o, .obj, .exe etc.) + #-------------------------------------------------------------------- + + + + + + +echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +if test "${ac_cv_prog_egrep+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +echo "${ECHO_T}$ac_cv_prog_egrep" >&6 + EGREP=$ac_cv_prog_egrep + + +echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_header_stdc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_header_stdc=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + exit(2); + exit (0); +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6 +if test $ac_cv_header_stdc = yes; then + +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_Header=no" +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here. + + + #------------------------------------------------------------------------ + # If we're using GCC, see if the compiler understands -pipe. If so, use it. + # It makes compiling go faster. (This is only a performance feature.) + #------------------------------------------------------------------------ + + if test -z "$no_pipe" -a -n "$GCC"; then + echo "$as_me:$LINENO: checking if the compiler understands -pipe" >&5 +echo $ECHO_N "checking if the compiler understands -pipe... $ECHO_C" >&6 + OLDCC="$CC" + CC="$CC -pipe" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +CC="$OLDCC" + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + fi + + #-------------------------------------------------------------------- + # Common compiler flag setup + #-------------------------------------------------------------------- + + echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 +echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6 +if test "${ac_cv_c_bigendian+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # See if sys/param.h defines the BYTE_ORDER macro. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include + +int +main () +{ +#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN + bogus endian macros +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + # It does; now see whether it defined to BIG_ENDIAN or not. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include + +int +main () +{ +#if BYTE_ORDER != BIG_ENDIAN + not big endian +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_c_bigendian=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_c_bigendian=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +# It does not; compile a test program. +if test "$cross_compiling" = yes; then + # try to guess the endianness by grepping values into an object file + ac_cv_c_bigendian=unknown + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; +short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; +void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; } +short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; +short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; +void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; } +int +main () +{ + _ascii (); _ebcdic (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then + ac_cv_c_bigendian=yes +fi +if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then + if test "$ac_cv_c_bigendian" = unknown; then + ac_cv_c_bigendian=no + else + # finding both strings is unlikely to happen, but who knows? + ac_cv_c_bigendian=unknown + fi +fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +int +main () +{ + /* Are we little or big endian? From Harbison&Steele. */ + union + { + long l; + char c[sizeof (long)]; + } u; + u.l = 1; + exit (u.c[sizeof (long) - 1] == 1); +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_c_bigendian=no +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_c_bigendian=yes +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 +echo "${ECHO_T}$ac_cv_c_bigendian" >&6 +case $ac_cv_c_bigendian in + yes) + +cat >>confdefs.h <<\_ACEOF +#define WORDS_BIGENDIAN 1 +_ACEOF + ;; + no) + ;; + *) + { { echo "$as_me:$LINENO: error: unknown endianness +presetting ac_cv_c_bigendian=no (or yes) will help" >&5 +echo "$as_me: error: unknown endianness +presetting ac_cv_c_bigendian=no (or yes) will help" >&2;} + { (exit 1); exit 1; }; } ;; +esac + + if test "${TEA_PLATFORM}" = "unix" ; then + + #-------------------------------------------------------------------- + # On a few very rare systems, all of the libm.a stuff is + # already in libc.a. Set compiler flags accordingly. + # Also, Linux requires the "ieee" library for math to work + # right (and it must appear before "-lm"). + #-------------------------------------------------------------------- + + echo "$as_me:$LINENO: checking for sin" >&5 +echo $ECHO_N "checking for sin... $ECHO_C" >&6 +if test "${ac_cv_func_sin+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define sin to an innocuous variant, in case declares sin. + For example, HP-UX 11i declares gettimeofday. */ +#define sin innocuous_sin + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char sin (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef sin + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char sin (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_sin) || defined (__stub___sin) +choke me +#else +char (*f) () = sin; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != sin; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_sin=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_sin=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_sin" >&5 +echo "${ECHO_T}$ac_cv_func_sin" >&6 +if test $ac_cv_func_sin = yes; then + MATH_LIBS="" +else + MATH_LIBS="-lm" +fi + + echo "$as_me:$LINENO: checking for main in -lieee" >&5 +echo $ECHO_N "checking for main in -lieee... $ECHO_C" >&6 +if test "${ac_cv_lib_ieee_main+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lieee $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + +int +main () +{ +main (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_ieee_main=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_ieee_main=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_ieee_main" >&5 +echo "${ECHO_T}$ac_cv_lib_ieee_main" >&6 +if test $ac_cv_lib_ieee_main = yes; then + MATH_LIBS="-lieee $MATH_LIBS" +fi + + + #-------------------------------------------------------------------- + # Interactive UNIX requires -linet instead of -lsocket, plus it + # needs net/errno.h to define the socket-related error codes. + #-------------------------------------------------------------------- + + echo "$as_me:$LINENO: checking for main in -linet" >&5 +echo $ECHO_N "checking for main in -linet... $ECHO_C" >&6 +if test "${ac_cv_lib_inet_main+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-linet $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + +int +main () +{ +main (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_inet_main=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_inet_main=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_inet_main" >&5 +echo "${ECHO_T}$ac_cv_lib_inet_main" >&6 +if test $ac_cv_lib_inet_main = yes; then + LIBS="$LIBS -linet" +fi + + if test "${ac_cv_header_net_errno_h+set}" = set; then + echo "$as_me:$LINENO: checking for net/errno.h" >&5 +echo $ECHO_N "checking for net/errno.h... $ECHO_C" >&6 +if test "${ac_cv_header_net_errno_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_net_errno_h" >&5 +echo "${ECHO_T}$ac_cv_header_net_errno_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking net/errno.h usability" >&5 +echo $ECHO_N "checking net/errno.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking net/errno.h presence" >&5 +echo $ECHO_N "checking net/errno.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: net/errno.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: net/errno.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: net/errno.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: net/errno.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: net/errno.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: net/errno.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: net/errno.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: net/errno.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: net/errno.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: net/errno.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------------- ## +## Report this to the filemonitor lists. ## +## -------------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for net/errno.h" >&5 +echo $ECHO_N "checking for net/errno.h... $ECHO_C" >&6 +if test "${ac_cv_header_net_errno_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_net_errno_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_net_errno_h" >&5 +echo "${ECHO_T}$ac_cv_header_net_errno_h" >&6 + +fi +if test $ac_cv_header_net_errno_h = yes; then + + +cat >>confdefs.h <<\_ACEOF +#define HAVE_NET_ERRNO_H 1 +_ACEOF + +fi + + + + #-------------------------------------------------------------------- + # Check for the existence of the -lsocket and -lnsl libraries. + # The order here is important, so that they end up in the right + # order in the command line generated by make. Here are some + # special considerations: + # 1. Use "connect" and "accept" to check for -lsocket, and + # "gethostbyname" to check for -lnsl. + # 2. Use each function name only once: can't redo a check because + # autoconf caches the results of the last check and won't redo it. + # 3. Use -lnsl and -lsocket only if they supply procedures that + # aren't already present in the normal libraries. This is because + # IRIX 5.2 has libraries, but they aren't needed and they're + # bogus: they goof up name resolution if used. + # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. + # To get around this problem, check for both libraries together + # if -lsocket doesn't work by itself. + #-------------------------------------------------------------------- + + tcl_checkBoth=0 + echo "$as_me:$LINENO: checking for connect" >&5 +echo $ECHO_N "checking for connect... $ECHO_C" >&6 +if test "${ac_cv_func_connect+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define connect to an innocuous variant, in case declares connect. + For example, HP-UX 11i declares gettimeofday. */ +#define connect innocuous_connect + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char connect (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef connect + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char connect (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_connect) || defined (__stub___connect) +choke me +#else +char (*f) () = connect; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != connect; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_connect=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_connect=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 +echo "${ECHO_T}$ac_cv_func_connect" >&6 +if test $ac_cv_func_connect = yes; then + tcl_checkSocket=0 +else + tcl_checkSocket=1 +fi + + if test "$tcl_checkSocket" = 1; then + echo "$as_me:$LINENO: checking for setsockopt" >&5 +echo $ECHO_N "checking for setsockopt... $ECHO_C" >&6 +if test "${ac_cv_func_setsockopt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define setsockopt to an innocuous variant, in case declares setsockopt. + For example, HP-UX 11i declares gettimeofday. */ +#define setsockopt innocuous_setsockopt + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char setsockopt (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef setsockopt + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char setsockopt (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_setsockopt) || defined (__stub___setsockopt) +choke me +#else +char (*f) () = setsockopt; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != setsockopt; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_setsockopt=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_setsockopt=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_setsockopt" >&5 +echo "${ECHO_T}$ac_cv_func_setsockopt" >&6 +if test $ac_cv_func_setsockopt = yes; then + : +else + echo "$as_me:$LINENO: checking for setsockopt in -lsocket" >&5 +echo $ECHO_N "checking for setsockopt in -lsocket... $ECHO_C" >&6 +if test "${ac_cv_lib_socket_setsockopt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsocket $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char setsockopt (); +int +main () +{ +setsockopt (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_socket_setsockopt=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_socket_setsockopt=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_socket_setsockopt" >&5 +echo "${ECHO_T}$ac_cv_lib_socket_setsockopt" >&6 +if test $ac_cv_lib_socket_setsockopt = yes; then + LIBS="$LIBS -lsocket" +else + tcl_checkBoth=1 +fi + +fi + + fi + if test "$tcl_checkBoth" = 1; then + tk_oldLibs=$LIBS + LIBS="$LIBS -lsocket -lnsl" + echo "$as_me:$LINENO: checking for accept" >&5 +echo $ECHO_N "checking for accept... $ECHO_C" >&6 +if test "${ac_cv_func_accept+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define accept to an innocuous variant, in case declares accept. + For example, HP-UX 11i declares gettimeofday. */ +#define accept innocuous_accept + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char accept (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef accept + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char accept (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_accept) || defined (__stub___accept) +choke me +#else +char (*f) () = accept; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != accept; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_accept=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_accept=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_accept" >&5 +echo "${ECHO_T}$ac_cv_func_accept" >&6 +if test $ac_cv_func_accept = yes; then + tcl_checkNsl=0 +else + LIBS=$tk_oldLibs +fi + + fi + echo "$as_me:$LINENO: checking for gethostbyname" >&5 +echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6 +if test "${ac_cv_func_gethostbyname+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define gethostbyname to an innocuous variant, in case declares gethostbyname. + For example, HP-UX 11i declares gettimeofday. */ +#define gethostbyname innocuous_gethostbyname + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char gethostbyname (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef gethostbyname + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char gethostbyname (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname) +choke me +#else +char (*f) () = gethostbyname; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != gethostbyname; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_gethostbyname=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_gethostbyname=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 +echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6 +if test $ac_cv_func_gethostbyname = yes; then + : +else + echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 +echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6 +if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lnsl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char gethostbyname (); +int +main () +{ +gethostbyname (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_nsl_gethostbyname=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_nsl_gethostbyname=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 +echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6 +if test $ac_cv_lib_nsl_gethostbyname = yes; then + LIBS="$LIBS -lnsl" +fi + +fi + + + # Don't perform the eval of the libraries here because DL_LIBS + # won't be set until we call TEA_CONFIG_CFLAGS + + TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}' + + + + + echo "$as_me:$LINENO: checking dirent.h" >&5 +echo $ECHO_N "checking dirent.h... $ECHO_C" >&6 + if test "${tcl_cv_dirent_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +int +main () +{ + +#ifndef _POSIX_SOURCE +# ifdef __Lynx__ + /* + * Generate compilation error to make the test fail: Lynx headers + * are only valid if really in the POSIX environment. + */ + + missing_procedure(); +# endif +#endif +DIR *d; +struct dirent *entryPtr; +char *p; +d = opendir("foobar"); +entryPtr = readdir(d); +p = entryPtr->d_name; +closedir(d); + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_dirent_h=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_dirent_h=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi + + + if test $tcl_cv_dirent_h = no; then + +cat >>confdefs.h <<\_ACEOF +#define NO_DIRENT_H 1 +_ACEOF + + fi + + echo "$as_me:$LINENO: result: $tcl_ok" >&5 +echo "${ECHO_T}$tcl_ok" >&6 + if test "${ac_cv_header_errno_h+set}" = set; then + echo "$as_me:$LINENO: checking for errno.h" >&5 +echo $ECHO_N "checking for errno.h... $ECHO_C" >&6 +if test "${ac_cv_header_errno_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_errno_h" >&5 +echo "${ECHO_T}$ac_cv_header_errno_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking errno.h usability" >&5 +echo $ECHO_N "checking errno.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking errno.h presence" >&5 +echo $ECHO_N "checking errno.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: errno.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: errno.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: errno.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: errno.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: errno.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: errno.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: errno.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: errno.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: errno.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: errno.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------------- ## +## Report this to the filemonitor lists. ## +## -------------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for errno.h" >&5 +echo $ECHO_N "checking for errno.h... $ECHO_C" >&6 +if test "${ac_cv_header_errno_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_errno_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_errno_h" >&5 +echo "${ECHO_T}$ac_cv_header_errno_h" >&6 + +fi +if test $ac_cv_header_errno_h = yes; then + : +else + +cat >>confdefs.h <<\_ACEOF +#define NO_ERRNO_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_float_h+set}" = set; then + echo "$as_me:$LINENO: checking for float.h" >&5 +echo $ECHO_N "checking for float.h... $ECHO_C" >&6 +if test "${ac_cv_header_float_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_float_h" >&5 +echo "${ECHO_T}$ac_cv_header_float_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking float.h usability" >&5 +echo $ECHO_N "checking float.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking float.h presence" >&5 +echo $ECHO_N "checking float.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: float.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: float.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: float.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: float.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: float.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: float.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: float.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: float.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: float.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: float.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------------- ## +## Report this to the filemonitor lists. ## +## -------------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for float.h" >&5 +echo $ECHO_N "checking for float.h... $ECHO_C" >&6 +if test "${ac_cv_header_float_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_float_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_float_h" >&5 +echo "${ECHO_T}$ac_cv_header_float_h" >&6 + +fi +if test $ac_cv_header_float_h = yes; then + : +else + +cat >>confdefs.h <<\_ACEOF +#define NO_FLOAT_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_values_h+set}" = set; then + echo "$as_me:$LINENO: checking for values.h" >&5 +echo $ECHO_N "checking for values.h... $ECHO_C" >&6 +if test "${ac_cv_header_values_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_values_h" >&5 +echo "${ECHO_T}$ac_cv_header_values_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking values.h usability" >&5 +echo $ECHO_N "checking values.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking values.h presence" >&5 +echo $ECHO_N "checking values.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: values.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: values.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: values.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: values.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: values.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: values.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: values.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: values.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: values.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: values.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------------- ## +## Report this to the filemonitor lists. ## +## -------------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for values.h" >&5 +echo $ECHO_N "checking for values.h... $ECHO_C" >&6 +if test "${ac_cv_header_values_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_values_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_values_h" >&5 +echo "${ECHO_T}$ac_cv_header_values_h" >&6 + +fi +if test $ac_cv_header_values_h = yes; then + : +else + +cat >>confdefs.h <<\_ACEOF +#define NO_VALUES_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_limits_h+set}" = set; then + echo "$as_me:$LINENO: checking for limits.h" >&5 +echo $ECHO_N "checking for limits.h... $ECHO_C" >&6 +if test "${ac_cv_header_limits_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_limits_h" >&5 +echo "${ECHO_T}$ac_cv_header_limits_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking limits.h usability" >&5 +echo $ECHO_N "checking limits.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking limits.h presence" >&5 +echo $ECHO_N "checking limits.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: limits.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: limits.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: limits.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: limits.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: limits.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: limits.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: limits.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: limits.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: limits.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: limits.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------------- ## +## Report this to the filemonitor lists. ## +## -------------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for limits.h" >&5 +echo $ECHO_N "checking for limits.h... $ECHO_C" >&6 +if test "${ac_cv_header_limits_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_limits_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_limits_h" >&5 +echo "${ECHO_T}$ac_cv_header_limits_h" >&6 + +fi +if test $ac_cv_header_limits_h = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_LIMITS_H 1 +_ACEOF + +else + +cat >>confdefs.h <<\_ACEOF +#define NO_LIMITS_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_stdlib_h+set}" = set; then + echo "$as_me:$LINENO: checking for stdlib.h" >&5 +echo $ECHO_N "checking for stdlib.h... $ECHO_C" >&6 +if test "${ac_cv_header_stdlib_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdlib_h" >&5 +echo "${ECHO_T}$ac_cv_header_stdlib_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking stdlib.h usability" >&5 +echo $ECHO_N "checking stdlib.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking stdlib.h presence" >&5 +echo $ECHO_N "checking stdlib.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: stdlib.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: stdlib.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: stdlib.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: stdlib.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: stdlib.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: stdlib.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: stdlib.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: stdlib.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: stdlib.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: stdlib.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------------- ## +## Report this to the filemonitor lists. ## +## -------------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for stdlib.h" >&5 +echo $ECHO_N "checking for stdlib.h... $ECHO_C" >&6 +if test "${ac_cv_header_stdlib_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_stdlib_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdlib_h" >&5 +echo "${ECHO_T}$ac_cv_header_stdlib_h" >&6 + +fi +if test $ac_cv_header_stdlib_h = yes; then + tcl_ok=1 +else + tcl_ok=0 +fi + + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strtol" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strtoul" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strtod" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + if test $tcl_ok = 0; then + +cat >>confdefs.h <<\_ACEOF +#define NO_STDLIB_H 1 +_ACEOF + + fi + if test "${ac_cv_header_string_h+set}" = set; then + echo "$as_me:$LINENO: checking for string.h" >&5 +echo $ECHO_N "checking for string.h... $ECHO_C" >&6 +if test "${ac_cv_header_string_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_string_h" >&5 +echo "${ECHO_T}$ac_cv_header_string_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking string.h usability" >&5 +echo $ECHO_N "checking string.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking string.h presence" >&5 +echo $ECHO_N "checking string.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: string.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: string.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: string.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: string.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: string.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: string.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: string.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: string.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: string.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: string.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------------- ## +## Report this to the filemonitor lists. ## +## -------------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for string.h" >&5 +echo $ECHO_N "checking for string.h... $ECHO_C" >&6 +if test "${ac_cv_header_string_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_string_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_string_h" >&5 +echo "${ECHO_T}$ac_cv_header_string_h" >&6 + +fi +if test $ac_cv_header_string_h = yes; then + tcl_ok=1 +else + tcl_ok=0 +fi + + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strstr" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strerror" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + + # See also memmove check below for a place where NO_STRING_H can be + # set and why. + + if test $tcl_ok = 0; then + +cat >>confdefs.h <<\_ACEOF +#define NO_STRING_H 1 +_ACEOF + + fi + + if test "${ac_cv_header_sys_wait_h+set}" = set; then + echo "$as_me:$LINENO: checking for sys/wait.h" >&5 +echo $ECHO_N "checking for sys/wait.h... $ECHO_C" >&6 +if test "${ac_cv_header_sys_wait_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5 +echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking sys/wait.h usability" >&5 +echo $ECHO_N "checking sys/wait.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking sys/wait.h presence" >&5 +echo $ECHO_N "checking sys/wait.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: sys/wait.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: sys/wait.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: sys/wait.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: sys/wait.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: sys/wait.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: sys/wait.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: sys/wait.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: sys/wait.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: sys/wait.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: sys/wait.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------------- ## +## Report this to the filemonitor lists. ## +## -------------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for sys/wait.h" >&5 +echo $ECHO_N "checking for sys/wait.h... $ECHO_C" >&6 +if test "${ac_cv_header_sys_wait_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_sys_wait_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5 +echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6 + +fi +if test $ac_cv_header_sys_wait_h = yes; then + : +else + +cat >>confdefs.h <<\_ACEOF +#define NO_SYS_WAIT_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo "$as_me:$LINENO: checking for dlfcn.h" >&5 +echo $ECHO_N "checking for dlfcn.h... $ECHO_C" >&6 +if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5 +echo "${ECHO_T}$ac_cv_header_dlfcn_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking dlfcn.h usability" >&5 +echo $ECHO_N "checking dlfcn.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking dlfcn.h presence" >&5 +echo $ECHO_N "checking dlfcn.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: dlfcn.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: dlfcn.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: dlfcn.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: dlfcn.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: dlfcn.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: dlfcn.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: dlfcn.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------------- ## +## Report this to the filemonitor lists. ## +## -------------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for dlfcn.h" >&5 +echo $ECHO_N "checking for dlfcn.h... $ECHO_C" >&6 +if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_dlfcn_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5 +echo "${ECHO_T}$ac_cv_header_dlfcn_h" >&6 + +fi +if test $ac_cv_header_dlfcn_h = yes; then + : +else + +cat >>confdefs.h <<\_ACEOF +#define NO_DLFCN_H 1 +_ACEOF + +fi + + + + # OS/390 lacks sys/param.h (and doesn't need it, by chance). + +for ac_header in sys/param.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------------- ## +## Report this to the filemonitor lists. ## +## -------------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + # Let the user call this, because if it triggers, they will + # need a compat/strtod.c that is correct. Users can also + # use Tcl_GetDouble(FromObj) instead. + #TEA_BUGGY_STRTOD + fi + + +#----------------------------------------------------------------------- +# __CHANGE__ +# Specify the C source files to compile in TEA_ADD_SOURCES, +# public headers that need to be installed in TEA_ADD_HEADERS, +# stub library C source files to compile in TEA_ADD_STUB_SOURCES, +# and runtime Tcl library files in TEA_ADD_TCL_SOURCES. +# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS +# and PKG_TCL_SOURCES. +#----------------------------------------------------------------------- + + + vars="tclFileMonitor.c" + for i in $vars; do + case $i in + \$*) + # allow $-var names + PKG_SOURCES="$PKG_SOURCES $i" + PKG_OBJECTS="$PKG_OBJECTS $i" + ;; + *) + # check for existence - allows for generic/win/unix VPATH + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + ; then + { { echo "$as_me:$LINENO: error: could not find source file '$i'" >&5 +echo "$as_me: error: could not find source file '$i'" >&2;} + { (exit 1); exit 1; }; } + fi + PKG_SOURCES="$PKG_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[^.]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[^.]*$//'`.\${OBJEXT}" + fi + PKG_OBJECTS="$PKG_OBJECTS $j" + ;; + esac + done + + + + + vars="" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + { { echo "$as_me:$LINENO: error: could not find header file '${srcdir}/$i'" >&5 +echo "$as_me: error: could not find header file '${srcdir}/$i'" >&2;} + { (exit 1); exit 1; }; } + fi + PKG_HEADERS="$PKG_HEADERS $i" + done + + + + vars="-I\"`${CYGPATH} ${srcdir}/generic`\"" + for i in $vars; do + PKG_INCLUDES="$PKG_INCLUDES $i" + done + + + + vars="" + for i in $vars; do + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then + # Convert foo.lib to -lfoo for GCC. No-op if not *.lib + i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` + fi + PKG_LIBS="$PKG_LIBS $i" + done + + + + PKG_CFLAGS="$PKG_CFLAGS " + + + + vars="" + for i in $vars; do + # check for existence - allows for generic/win/unix VPATH + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + ; then + { { echo "$as_me:$LINENO: error: could not find stub source file '$i'" >&5 +echo "$as_me: error: could not find stub source file '$i'" >&2;} + { (exit 1); exit 1; }; } + fi + PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[^.]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[^.]*$//'`.\${OBJEXT}" + fi + PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j" + done + + + + + vars="" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + { { echo "$as_me:$LINENO: error: could not find tcl source file '${srcdir}/$i'" >&5 +echo "$as_me: error: could not find tcl source file '${srcdir}/$i'" >&2;} + { (exit 1); exit 1; }; } + fi + PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i" + done + + + +#-------------------------------------------------------------------- +# __CHANGE__ +# A few miscellaneous platform-specific items: +# +# Define a special symbol for Windows (BUILD_sample in this case) so +# that we create the export library with the dll. +# +# Windows creates a few extra files that need to be cleaned up. +# You can add more files to clean if your extension creates any extra +# files. +# +# TEA_ADD_* any platform specific compiler/build info here. +#-------------------------------------------------------------------- + +if test "${TEA_PLATFORM}" = "windows" ; then + cat >>confdefs.h <<\_ACEOF +#define BUILD_sample 1 +_ACEOF + + CLEANFILES="pkgIndex.tcl *.lib *.dll *.exp *.ilk *.pdb vc*.pch" + + vars="win/tclWinFileMonitor.c" + for i in $vars; do + case $i in + \$*) + # allow $-var names + PKG_SOURCES="$PKG_SOURCES $i" + PKG_OBJECTS="$PKG_OBJECTS $i" + ;; + *) + # check for existence - allows for generic/win/unix VPATH + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + ; then + { { echo "$as_me:$LINENO: error: could not find source file '$i'" >&5 +echo "$as_me: error: could not find source file '$i'" >&2;} + { (exit 1); exit 1; }; } + fi + PKG_SOURCES="$PKG_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[^.]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[^.]*$//'`.\${OBJEXT}" + fi + PKG_OBJECTS="$PKG_OBJECTS $j" + ;; + esac + done + + + + #TEA_ADD_INCLUDES([-I\"$(${CYGPATH} ${srcdir}/win)\"]) +else + CLEANFILES="pkgIndex.tcl" + + vars="unix/tclUnixFileMonitor.c unix/tclUnixFileMonitorKQ.c" + for i in $vars; do + case $i in + \$*) + # allow $-var names + PKG_SOURCES="$PKG_SOURCES $i" + PKG_OBJECTS="$PKG_OBJECTS $i" + ;; + *) + # check for existence - allows for generic/win/unix VPATH + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + ; then + { { echo "$as_me:$LINENO: error: could not find source file '$i'" >&5 +echo "$as_me: error: could not find source file '$i'" >&2;} + { (exit 1); exit 1; }; } + fi + PKG_SOURCES="$PKG_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[^.]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[^.]*$//'`.\${OBJEXT}" + fi + PKG_OBJECTS="$PKG_OBJECTS $j" + ;; + esac + done + + + + #TEA_ADD_LIBS([-lsuperfly]) +fi + + +#-------------------------------------------------------------------- +# __CHANGE__ +# Choose which headers you need. Extension authors should try very +# hard to only rely on the Tcl public header files. Internal headers +# contain private data structures and are subject to change without +# notice. +# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG +#-------------------------------------------------------------------- + + + echo "$as_me:$LINENO: checking for Tcl public headers" >&5 +echo $ECHO_N "checking for Tcl public headers... $ECHO_C" >&6 + + +# Check whether --with-tclinclude or --without-tclinclude was given. +if test "${with_tclinclude+set}" = set; then + withval="$with_tclinclude" + with_tclinclude=${withval} +fi; + + if test "${ac_cv_c_tclh+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + # Use the value from --with-tclinclude, if it was given + + if test x"${with_tclinclude}" != x ; then + if test -f "${with_tclinclude}/tcl.h" ; then + ac_cv_c_tclh=${with_tclinclude} + else + { { echo "$as_me:$LINENO: error: ${with_tclinclude} directory does not contain tcl.h" >&5 +echo "$as_me: error: ${with_tclinclude} directory does not contain tcl.h" >&2;} + { (exit 1); exit 1; }; } + fi + else + # Check order: pkg --prefix location, Tcl's --prefix location, + # directory of tclConfig.sh, and Tcl source directory. + # Looking in the source dir is not ideal, but OK. + + eval "temp_includedir=${includedir}" + list="`ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null` \ + `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + fi + for i in $list ; do + if test -f "$i/tcl.h" ; then + ac_cv_c_tclh=$i + break + fi + done + fi + +fi + + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_tclh}" = x ; then + { { echo "$as_me:$LINENO: error: tcl.h not found. Please specify its location with --with-tclinclude" >&5 +echo "$as_me: error: tcl.h not found. Please specify its location with --with-tclinclude" >&2;} + { (exit 1); exit 1; }; } + else + echo "$as_me:$LINENO: result: ${ac_cv_c_tclh}" >&5 +echo "${ECHO_T}${ac_cv_c_tclh}" >&6 + fi + + # Convert to a native path and substitute into the output files. + + INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}` + + TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + + +#TEA_PRIVATE_TCL_HEADERS + +#TEA_PUBLIC_TK_HEADERS +#TEA_PRIVATE_TK_HEADERS +#TEA_PATH_X + +#-------------------------------------------------------------------- +# Check whether --enable-threads or --disable-threads was given. +# This auto-enables if Tcl was compiled threaded. +#-------------------------------------------------------------------- + + + # Check whether --enable-threads or --disable-threads was given. +if test "${enable_threads+set}" = set; then + enableval="$enable_threads" + tcl_ok=$enableval +else + tcl_ok= +fi; + + if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then + TCL_THREADS=1 + + if test "${TEA_PLATFORM}" != "windows" ; then + # We are always OK on Windows, so check what this platform wants. + +cat >>confdefs.h <<\_ACEOF +#define USE_THREAD_ALLOC 1 +_ACEOF + + +cat >>confdefs.h <<\_ACEOF +#define _REENTRANT 1 +_ACEOF + + +cat >>confdefs.h <<\_ACEOF +#define _THREAD_SAFE 1 +_ACEOF + + echo "$as_me:$LINENO: checking for pthread_mutex_init in -lpthread" >&5 +echo $ECHO_N "checking for pthread_mutex_init in -lpthread... $ECHO_C" >&6 +if test "${ac_cv_lib_pthread_pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpthread $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char pthread_mutex_init (); +int +main () +{ +pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_pthread_pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_pthread_pthread_mutex_init=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_pthread_pthread_mutex_init" >&6 +if test $ac_cv_lib_pthread_pthread_mutex_init = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = "no"; then + # Check a little harder for __pthread_mutex_init in the + # same library, as some systems hide it there until + # pthread.h is defined. We could alternatively do an + # AC_TRY_COMPILE with pthread.h, but that will work with + # libpthread really doesn't exist, like AIX 4.2. + # [Bug: 4359] + echo "$as_me:$LINENO: checking for __pthread_mutex_init in -lpthread" >&5 +echo $ECHO_N "checking for __pthread_mutex_init in -lpthread... $ECHO_C" >&6 +if test "${ac_cv_lib_pthread___pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpthread $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char __pthread_mutex_init (); +int +main () +{ +__pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_pthread___pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_pthread___pthread_mutex_init=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_pthread___pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_pthread___pthread_mutex_init" >&6 +if test $ac_cv_lib_pthread___pthread_mutex_init = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + fi + + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthread" + else + echo "$as_me:$LINENO: checking for pthread_mutex_init in -lpthreads" >&5 +echo $ECHO_N "checking for pthread_mutex_init in -lpthreads... $ECHO_C" >&6 +if test "${ac_cv_lib_pthreads_pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpthreads $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char pthread_mutex_init (); +int +main () +{ +pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_pthreads_pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_pthreads_pthread_mutex_init=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_pthreads_pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_pthreads_pthread_mutex_init" >&6 +if test $ac_cv_lib_pthreads_pthread_mutex_init = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthreads" + else + echo "$as_me:$LINENO: checking for pthread_mutex_init in -lc" >&5 +echo $ECHO_N "checking for pthread_mutex_init in -lc... $ECHO_C" >&6 +if test "${ac_cv_lib_c_pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lc $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char pthread_mutex_init (); +int +main () +{ +pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_c_pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_c_pthread_mutex_init=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_c_pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_c_pthread_mutex_init" >&6 +if test $ac_cv_lib_c_pthread_mutex_init = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = "no"; then + echo "$as_me:$LINENO: checking for pthread_mutex_init in -lc_r" >&5 +echo $ECHO_N "checking for pthread_mutex_init in -lc_r... $ECHO_C" >&6 +if test "${ac_cv_lib_c_r_pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lc_r $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char pthread_mutex_init (); +int +main () +{ +pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_c_r_pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_c_r_pthread_mutex_init=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_c_r_pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_c_r_pthread_mutex_init" >&6 +if test $ac_cv_lib_c_r_pthread_mutex_init = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -pthread" + else + TCL_THREADS=0 + { echo "$as_me:$LINENO: WARNING: \"Don t know how to find pthread lib on your system - thread support disabled\"" >&5 +echo "$as_me: WARNING: \"Don t know how to find pthread lib on your system - thread support disabled\"" >&2;} + fi + fi + fi + fi + + # Does the pthread-implementation provide + # 'pthread_attr_setstacksize' ? + + ac_saved_libs=$LIBS + LIBS="$LIBS $THREADS_LIBS" + +for ac_func in pthread_attr_setstacksize +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $ac_func + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + LIBS=$ac_saved_libs + +for ac_func in readdir_r +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $ac_func + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + fi + else + TCL_THREADS=0 + fi + # Do checking message here to not mess up interleaved configure output + echo "$as_me:$LINENO: checking for building with threads" >&5 +echo $ECHO_N "checking for building with threads... $ECHO_C" >&6 + if test "${TCL_THREADS}" = "1"; then + +cat >>confdefs.h <<\_ACEOF +#define TCL_THREADS 1 +_ACEOF + + #LIBS="$LIBS $THREADS_LIBS" + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + else + echo "$as_me:$LINENO: result: no (default)" >&5 +echo "${ECHO_T}no (default)" >&6 + fi + # TCL_THREADS sanity checking. See if our request for building with + # threads is the same as the way Tcl was built. If not, warn the user. + case ${TCL_DEFS} in + *THREADS=1*) + if test "${TCL_THREADS}" = "0"; then + { echo "$as_me:$LINENO: WARNING: + Building ${PACKAGE_NAME} without threads enabled, but building against a Tcl + that IS thread-enabled." >&5 +echo "$as_me: WARNING: + Building ${PACKAGE_NAME} without threads enabled, but building against a Tcl + that IS thread-enabled." >&2;} + fi + ;; + *) + if test "${TCL_THREADS}" = "1"; then + { echo "$as_me:$LINENO: WARNING: + --enable-threads requested, but attempting building against a Tcl + that is NOT thread-enabled." >&5 +echo "$as_me: WARNING: + --enable-threads requested, but attempting building against a Tcl + that is NOT thread-enabled." >&2;} + fi + ;; + esac + + + +#-------------------------------------------------------------------- +# The statement below defines a collection of symbols related to +# building as a shared library instead of a static library. +#-------------------------------------------------------------------- + + + echo "$as_me:$LINENO: checking how to build libraries" >&5 +echo $ECHO_N "checking how to build libraries... $ECHO_C" >&6 + # Check whether --enable-shared or --disable-shared was given. +if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + tcl_ok=$enableval +else + tcl_ok=yes +fi; + + if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + tcl_ok=$enableval + else + tcl_ok=yes + fi + + if test "$tcl_ok" = "yes" ; then + echo "$as_me:$LINENO: result: shared" >&5 +echo "${ECHO_T}shared" >&6 + SHARED_BUILD=1 + else + echo "$as_me:$LINENO: result: static" >&5 +echo "${ECHO_T}static" >&6 + SHARED_BUILD=0 + +cat >>confdefs.h <<\_ACEOF +#define STATIC_BUILD 1 +_ACEOF + + fi + + + +#-------------------------------------------------------------------- +# Package specific configuration. +#-------------------------------------------------------------------- + + + + echo "$as_me:$LINENO: checking for kqueue" >&5 +echo $ECHO_N "checking for kqueue... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +#include +#include +#include + +int +main () +{ + + struct kevent kev; + int kq, n; + kq = kqueue(); + n = kevent(kq, NULL, 0, &kev, 1, NULL); + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + have_kqueue=yes; cat >>confdefs.h <<\_ACEOF +#define HAVE_KQUEUE 1 +_ACEOF + +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +have_kqueue=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + echo "$as_me:$LINENO: result: $have_kqueue" >&5 +echo "${ECHO_T}$have_kqueue" >&6 + + + + echo "$as_me:$LINENO: checking for F_NOTIFY" >&5 +echo $ECHO_N "checking for F_NOTIFY... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +#define _GNU_SOURCE +#include + +int +main () +{ + fcntl(0, F_NOTIFY, DN_MODIFY); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + have_f_notify=yes; cat >>confdefs.h <<\_ACEOF +#define HAVE_F_NOTIFY 1 +_ACEOF + +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +have_f_notify=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + echo "$as_me:$LINENO: result: $have_f_notify" >&5 +echo "${ECHO_T}$have_f_notify" >&6 + + +#-------------------------------------------------------------------- +# This macro figures out what flags to use with the compiler/linker +# when building shared/static debug/optimized objects. This information +# can be taken from the tclConfig.sh file, but this figures it all out. +#-------------------------------------------------------------------- + + + # Allow the user to provide this setting in the env + if test "x${TCLSH_PROG}" = "x" ; then + echo "$as_me:$LINENO: checking for tclsh" >&5 +echo $ECHO_N "checking for tclsh... $ECHO_C" >&6 + + if test "${ac_cv_path_tclsh+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + search_path=`echo ${PATH} | sed -e 's/:/ /g'` + if test "${TEA_PLATFORM}" != "windows" -o \ + \( "$do64bit_ok" = "no" -a "$doWince" = "no" \) ; then + # Do not allow target tclsh in known cross-compile builds, + # as we need one we can run on this system + search_path="${TCL_BIN_DIR} ${TCL_BIN_DIR}/../bin ${exec_prefix}/bin ${prefix}/bin ${search_path}" + fi + for dir in $search_path ; do + for j in `ls -r $dir/tclsh[8-9]*${EXEEXT} 2> /dev/null` \ + `ls -r $dir/tclsh*${EXEEXT} 2> /dev/null` ; do + if test x"$ac_cv_path_tclsh" = x ; then + if test -f "$j" ; then + ac_cv_path_tclsh=$j + break + fi + fi + done + done + +fi + + + if test -f "$ac_cv_path_tclsh" ; then + TCLSH_PROG=$ac_cv_path_tclsh + echo "$as_me:$LINENO: result: $TCLSH_PROG" >&5 +echo "${ECHO_T}$TCLSH_PROG" >&6 + else + { { echo "$as_me:$LINENO: error: No tclsh found in PATH: $search_path" >&5 +echo "$as_me: error: No tclsh found in PATH: $search_path" >&2;} + { (exit 1); exit 1; }; } + fi + fi + + + + + + # Step 0: Enable 64 bit support? + + echo "$as_me:$LINENO: checking if 64bit support is enabled" >&5 +echo $ECHO_N "checking if 64bit support is enabled... $ECHO_C" >&6 + # Check whether --enable-64bit or --disable-64bit was given. +if test "${enable_64bit+set}" = set; then + enableval="$enable_64bit" + do64bit=$enableval +else + do64bit=no +fi; + echo "$as_me:$LINENO: result: $do64bit" >&5 +echo "${ECHO_T}$do64bit" >&6 + + # Step 0.b: Enable Solaris 64 bit VIS support? + + echo "$as_me:$LINENO: checking if 64bit Sparc VIS support is requested" >&5 +echo $ECHO_N "checking if 64bit Sparc VIS support is requested... $ECHO_C" >&6 + # Check whether --enable-64bit-vis or --disable-64bit-vis was given. +if test "${enable_64bit_vis+set}" = set; then + enableval="$enable_64bit_vis" + do64bitVIS=$enableval +else + do64bitVIS=no +fi; + echo "$as_me:$LINENO: result: $do64bitVIS" >&5 +echo "${ECHO_T}$do64bitVIS" >&6 + + if test "$do64bitVIS" = "yes"; then + # Force 64bit on with VIS + do64bit=yes + fi + + # Step 0.c: Cross-compiling options for Windows/CE builds? + + if test "${TEA_PLATFORM}" = "windows" ; then + echo "$as_me:$LINENO: checking if Windows/CE build is requested" >&5 +echo $ECHO_N "checking if Windows/CE build is requested... $ECHO_C" >&6 + # Check whether --enable-wince or --disable-wince was given. +if test "${enable_wince+set}" = set; then + enableval="$enable_wince" + doWince=$enableval +else + doWince=no +fi; + echo "$as_me:$LINENO: result: $doWince" >&5 +echo "${ECHO_T}$doWince" >&6 + fi + + # Step 1: set the variable "system" to hold the name and version number + # for the system. This can usually be done via the "uname" command, but + # there are a few systems, like Next, where this doesn't work. + + echo "$as_me:$LINENO: checking system version (for dynamic loading)" >&5 +echo $ECHO_N "checking system version (for dynamic loading)... $ECHO_C" >&6 + if test -f /usr/lib/NextStep/software_version; then + system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` + else + system=`uname -s`-`uname -r` + if test "$?" -ne 0 ; then + echo "$as_me:$LINENO: result: unknown (can't find uname command)" >&5 +echo "${ECHO_T}unknown (can't find uname command)" >&6 + system=unknown + else + # Special check for weird MP-RAS system (uname returns weird + # results, and the version is kept in special file). + + if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then + system=MP-RAS-`awk '{print }' /etc/.relid'` + fi + if test "`uname -s`" = "AIX" ; then + system=AIX-`uname -v`.`uname -r` + fi + if test "${TEA_PLATFORM}" = "windows" ; then + system=windows + fi + echo "$as_me:$LINENO: result: $system" >&5 +echo "${ECHO_T}$system" >&6 + fi + fi + + # Step 2: check for existence of -ldl library. This is needed because + # Linux can use either -ldl or -ldld for dynamic loading. + + echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dl_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dl_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +if test $ac_cv_lib_dl_dlopen = yes; then + have_dl=yes +else + have_dl=no +fi + + + # Step 3: set configuration options based on system name and version. + # This is similar to Tcl's unix/tcl.m4 except that we've added a + # "windows" case and CC_SEARCH_FLAGS becomes LD_SEARCH_FLAGS for us + # (and we have no CC_SEARCH_FLAGS). + + do64bit_ok=no + LDFLAGS_ORIG="$LDFLAGS" + TCL_EXPORT_FILE_SUFFIX="" + UNSHARED_LIB_SUFFIX="" + TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`' + ECHO_VERSION='`echo ${PACKAGE_VERSION}`' + TCL_LIB_VERSIONS_OK=ok + CFLAGS_DEBUG=-g + if test "$GCC" = "yes" ; then + CFLAGS_OPTIMIZE=-O2 + CFLAGS_WARNING="-Wall -Wno-implicit-int" + else + CFLAGS_OPTIMIZE=-O + CFLAGS_WARNING="" + fi + TCL_NEEDS_EXP_FILE=0 + TCL_BUILD_EXP_FILE="" + TCL_EXP_FILE="" + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + echo "$as_me:$LINENO: result: $AR" >&5 +echo "${ECHO_T}$AR" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + STLIB_LD='${AR} cr' + LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" + case $system in + windows) + # This is a 2-stage check to make sure we have the 64-bit SDK + # We have to know where the SDK is installed. + if test "$do64bit" = "yes" ; then + if test "x${MSSDK}x" = "xx" ; then + MSSDK="C:/Progra~1/Microsoft SDK" + fi + # Ensure that this path has no spaces to work in autoconf + + if test "${TEA_PLATFORM}" = "windows" ; then + # we need TCLSH_PROG defined to get Windows short pathnames + + + echo "$as_me:$LINENO: checking short pathname for MSSDK (${MSSDK})" >&5 +echo $ECHO_N "checking short pathname for MSSDK (${MSSDK})... $ECHO_C" >&6 + + shortpath= + case "${MSSDK}" in + *\ *) + # Only do this if we need to. + shortpath=`echo "puts [file attributes {${MSSDK}} -shortname] ; exit" | ${TCLSH_PROG} 2>/dev/null` + ;; + esac + if test "x${shortpath}" = "x" ; then + echo "$as_me:$LINENO: result: not changed" >&5 +echo "${ECHO_T}not changed" >&6 + else + MSSDK=$shortpath + echo "$as_me:$LINENO: result: ${MSSDK}" >&5 +echo "${ECHO_T}${MSSDK}" >&6 + fi + fi + + if test ! -d "${MSSDK}/bin/win64" ; then + { echo "$as_me:$LINENO: WARNING: could not find 64-bit SDK to enable 64bit mode" >&5 +echo "$as_me: WARNING: could not find 64-bit SDK to enable 64bit mode" >&2;} + do64bit="no" + else + do64bit_ok="yes" + fi + fi + + if test "$doWince" != "no" ; then + if test "$do64bit" = "yes" ; then + { { echo "$as_me:$LINENO: error: Windows/CE and 64-bit builds incompatible" >&5 +echo "$as_me: error: Windows/CE and 64-bit builds incompatible" >&2;} + { (exit 1); exit 1; }; } + fi + if test "$GCC" = "yes" ; then + { { echo "$as_me:$LINENO: error: Windows/CE and GCC builds incompatible" >&5 +echo "$as_me: error: Windows/CE and GCC builds incompatible" >&2;} + { (exit 1); exit 1; }; } + fi + + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-celib + + if test x"${no_celib}" = x ; then + # we reset no_celib in case something fails here + no_celib=true + +# Check whether --with-celib or --without-celib was given. +if test "${with_celib+set}" = set; then + withval="$with_celib" + with_celibconfig=${withval} +fi; + echo "$as_me:$LINENO: checking for Windows/CE celib directory" >&5 +echo $ECHO_N "checking for Windows/CE celib directory... $ECHO_C" >&6 + if test "${ac_cv_c_celibconfig+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + # First check to see if --with-celibconfig was specified. + if test x"${with_celibconfig}" != x ; then + if test -d "${with_celibconfig}/inc" ; then + ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)` + else + { { echo "$as_me:$LINENO: error: ${with_celibconfig} directory doesn't contain inc directory" >&5 +echo "$as_me: error: ${with_celibconfig} directory doesn't contain inc directory" >&2;} + { (exit 1); exit 1; }; } + fi + fi + + # then check for a celib library + if test x"${ac_cv_c_celibconfig}" = x ; then + for i in \ + ../celib-palm-3.0 \ + ../celib \ + ../../celib-palm-3.0 \ + ../../celib \ + `ls -dr ../celib-*3.[0-9]* 2>/dev/null` \ + ${srcdir}/../celib-palm-3.0 \ + ${srcdir}/../celib \ + `ls -dr ${srcdir}/../celib-*3.[0-9]* 2>/dev/null` \ + ; do + if test -d "$i/inc" ; then + ac_cv_c_celibconfig=`(cd $i; pwd)` + break + fi + done + fi + +fi + + if test x"${ac_cv_c_celibconfig}" = x ; then + { { echo "$as_me:$LINENO: error: Cannot find celib support library directory" >&5 +echo "$as_me: error: Cannot find celib support library directory" >&2;} + { (exit 1); exit 1; }; } + else + no_celib= + CELIB_DIR=${ac_cv_c_celibconfig} + echo "$as_me:$LINENO: result: found $CELIB_DIR" >&5 +echo "${ECHO_T}found $CELIB_DIR" >&6 + + if test "${TEA_PLATFORM}" = "windows" ; then + # we need TCLSH_PROG defined to get Windows short pathnames + + + echo "$as_me:$LINENO: checking short pathname for CELIB_DIR (${ac_cv_c_celibconfig})" >&5 +echo $ECHO_N "checking short pathname for CELIB_DIR (${ac_cv_c_celibconfig})... $ECHO_C" >&6 + + shortpath= + case "${ac_cv_c_celibconfig}" in + *\ *) + # Only do this if we need to. + shortpath=`echo "puts [file attributes {${ac_cv_c_celibconfig}} -shortname] ; exit" | ${TCLSH_PROG} 2>/dev/null` + ;; + esac + if test "x${shortpath}" = "x" ; then + echo "$as_me:$LINENO: result: not changed" >&5 +echo "${ECHO_T}not changed" >&6 + else + CELIB_DIR=$shortpath + echo "$as_me:$LINENO: result: ${CELIB_DIR}" >&5 +echo "${ECHO_T}${CELIB_DIR}" >&6 + fi + fi + + fi + fi + + # Set defaults for common evc4/PPC2003 setup + # Currently Tcl requires 300+, possibly 420+ for sockets + CEVERSION=420; # could be 211 300 301 400 420 ... + TARGETCPU=ARMV4; # could be ARMV4 ARM MIPS SH3 X86 ... + ARCH=ARM; # could be ARM MIPS X86EM ... + PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002" + if test "$doWince" != "yes"; then + # If !yes then the user specified something + # Reset ARCH to allow user to skip specifying it + ARCH= + eval `echo $doWince | awk -F, '{ \ + if (length($1)) { printf "CEVERSION=\"%s\"\n", $1; \ + if ($1 < 400) { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \ + if (length($2)) { printf "TARGETCPU=\"%s\"\n", toupper($2) }; \ + if (length($3)) { printf "ARCH=\"%s\"\n", toupper($3) }; \ + if (length($4)) { printf "PLATFORM=\"%s\"\n", $4 }; \ + }'` + if test "x${ARCH}" = "x" ; then + ARCH=$TARGETCPU; + fi + fi + OSVERSION=WCE$CEVERSION; + if test "x${WCEROOT}" = "x" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0" + if test ! -d "${WCEROOT}" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded Tools" + fi + fi + if test "x${SDKROOT}" = "x" ; then + SDKROOT="C:/Program Files/Windows CE Tools" + if test ! -d "${SDKROOT}" ; then + SDKROOT="C:/Windows CE Tools" + fi + fi + # Ensure that this path has no spaces to work in autoconf + + if test "${TEA_PLATFORM}" = "windows" ; then + # we need TCLSH_PROG defined to get Windows short pathnames + + + echo "$as_me:$LINENO: checking short pathname for WCEROOT (${WCEROOT})" >&5 +echo $ECHO_N "checking short pathname for WCEROOT (${WCEROOT})... $ECHO_C" >&6 + + shortpath= + case "${WCEROOT}" in + *\ *) + # Only do this if we need to. + shortpath=`echo "puts [file attributes {${WCEROOT}} -shortname] ; exit" | ${TCLSH_PROG} 2>/dev/null` + ;; + esac + if test "x${shortpath}" = "x" ; then + echo "$as_me:$LINENO: result: not changed" >&5 +echo "${ECHO_T}not changed" >&6 + else + WCEROOT=$shortpath + echo "$as_me:$LINENO: result: ${WCEROOT}" >&5 +echo "${ECHO_T}${WCEROOT}" >&6 + fi + fi + + + if test "${TEA_PLATFORM}" = "windows" ; then + # we need TCLSH_PROG defined to get Windows short pathnames + + + echo "$as_me:$LINENO: checking short pathname for SDKROOT (${SDKROOT})" >&5 +echo $ECHO_N "checking short pathname for SDKROOT (${SDKROOT})... $ECHO_C" >&6 + + shortpath= + case "${SDKROOT}" in + *\ *) + # Only do this if we need to. + shortpath=`echo "puts [file attributes {${SDKROOT}} -shortname] ; exit" | ${TCLSH_PROG} 2>/dev/null` + ;; + esac + if test "x${shortpath}" = "x" ; then + echo "$as_me:$LINENO: result: not changed" >&5 +echo "${ECHO_T}not changed" >&6 + else + SDKROOT=$shortpath + echo "$as_me:$LINENO: result: ${SDKROOT}" >&5 +echo "${ECHO_T}${SDKROOT}" >&6 + fi + fi + + if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \ + -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then + { { echo "$as_me:$LINENO: error: could not find PocketPC SDK or target compiler to enable WinCE mode $CEVERSION,$TARGETCPU,$ARCH,$PLATFORM" >&5 +echo "$as_me: error: could not find PocketPC SDK or target compiler to enable WinCE mode $CEVERSION,$TARGETCPU,$ARCH,$PLATFORM" >&2;} + { (exit 1); exit 1; }; } + doWince="no" + else + # We could PATH_NOSPACE these, but that's not important, + # as long as we quote them when used. + CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include" + if test -d "${CEINCLUDE}/${TARGETCPU}" ; then + CEINCLUDE="${CEINCLUDE}/${TARGETCPU}" + fi + CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" + fi + fi + + if test "$GCC" != "yes" ; then + if test "${SHARED_BUILD}" = "0" ; then + runtime=-MT + else + runtime=-MD + fi + + if test "$do64bit" = "yes" ; then + # All this magic is necessary for the Win64 SDK RC1 - hobbs + CC="${MSSDK}/Bin/Win64/cl.exe" + CFLAGS="${CFLAGS} -I${MSSDK}/Include/prerelease \ + -I${MSSDK}/Include/Win64/crt \ + -I${MSSDK}/Include" + RC="${MSSDK}/bin/rc.exe" + lflags="-MACHINE:IA64 -LIBPATH:${MSSDK}/Lib/IA64 \ + -LIBPATH:${MSSDK}/Lib/Prerelease/IA64 -nologo" + LINKBIN="${MSSDK}/bin/win64/link.exe" + CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" + elif test "$doWince" != "no" ; then + CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin" + if test "${TARGETCPU}" = "X86"; then + CC="${CEBINROOT}/cl.exe" + else + CC="${CEBINROOT}/cl${ARCH}.exe" + fi + CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\"" + RC="${WCEROOT}/Common/EVC/bin/rc.exe" + arch=`echo ${ARCH} | awk '{print tolower($0)}'` + defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS" + if test "${SHARED_BUILD}" = "1" ; then + # Static CE builds require static celib as well + defs="${defs} _DLL" + fi + for i in $defs ; do + +cat >>confdefs.h <<_ACEOF +#define $i 1 +_ACEOF + + done + +cat >>confdefs.h <<_ACEOF +#define _WIN32_WCE $CEVERSION +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define UNDER_CE $CEVERSION +_ACEOF + + CFLAGS_DEBUG="-nologo -Zi -Od" + CFLAGS_OPTIMIZE="-nologo -Ox" + lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'` + lflags="-MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo" + LINKBIN="${CEBINROOT}/link.exe" + + else + RC="rc" + lflags="-nologo" + LINKBIN="link" + CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" + fi + fi + + if test "$GCC" = "yes"; then + # mingw gcc mode + RC="windres" + CFLAGS_DEBUG="-g" + CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" + SHLIB_LD="$CC -shared" + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}" + LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}" + else + SHLIB_LD="${LINKBIN} -dll ${lflags}" + # link -lib only works when -lib is the first arg + STLIB_LD="${LINKBIN} -lib ${lflags}" + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib' + PATHTYPE=-w + # For information on what debugtype is most useful, see: + # http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp + # This essentially turns it all on. + LDFLAGS_DEBUG="-debug:full -debugtype:both -warn:2" + LDFLAGS_OPTIMIZE="-release" + if test "$doWince" != "no" ; then + LDFLAGS_CONSOLE="-link ${lflags}" + LDFLAGS_WINDOW=${LDFLAGS_CONSOLE} + else + LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}" + LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}" + fi + fi + + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".dll" + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll' + + TCL_LIB_VERSIONS_OK=nodots + # Bogus to avoid getting this turned off + DL_OBJS="tclLoadNone.obj" + ;; + AIX-*) + if test "${TCL_THREADS}" = "1" -a "$GCC" != "yes" ; then + # AIX requires the _r compiler when gcc isn't being used + if test "${CC}" != "cc_r" ; then + CC=${CC}_r + fi + echo "$as_me:$LINENO: result: Using $CC for compiling with threads" >&5 +echo "${ECHO_T}Using $CC for compiling with threads" >&6 + fi + LIBS="$LIBS -lc" + SHLIB_CFLAGS="" + SHLIB_SUFFIX=".so" + SHLIB_LD_LIBS='${LIBS}' + + DL_OBJS="tclLoadDl.o" + LD_LIBRARY_PATH_VAR="LIBPATH" + + # AIX v<=4.1 has some different flags than 4.2+ + if test "$system" = "AIX-4.1" -o "`uname -v`" -lt "4" ; then + #LIBOBJS="$LIBOBJS tclLoadAix.o" + case $LIBOBJS in + "tclLoadAix.$ac_objext" | \ + *" tclLoadAix.$ac_objext" | \ + "tclLoadAix.$ac_objext "* | \ + *" tclLoadAix.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS tclLoadAix.$ac_objext" ;; +esac + + DL_LIBS="-lld" + fi + + # Check to enable 64-bit flags for compiler/linker on AIX 4+ + if test "$do64bit" = "yes" -a "`uname -v`" -gt "3" ; then + if test "$GCC" = "yes" ; then + { echo "$as_me:$LINENO: WARNING: \"64bit mode not supported with GCC on $system\"" >&5 +echo "$as_me: WARNING: \"64bit mode not supported with GCC on $system\"" >&2;} + else + do64bit_ok=yes + CFLAGS="$CFLAGS -q64" + LDFLAGS="$LDFLAGS -q64" + RANLIB="${RANLIB} -X64" + AR="${AR} -X64" + SHLIB_LD_FLAGS="-b64" + fi + fi + + if test "`uname -m`" = "ia64" ; then + # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + # AIX-5 has dl* in libc.so + DL_LIBS="" + if test "$GCC" = "yes" ; then + LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + else + LD_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' + fi + else + if test "$GCC" = "yes" ; then + SHLIB_LD="gcc -shared" + else + SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry" + fi + SHLIB_LD="${TCL_SRC_DIR}/unix/ldAix ${SHLIB_LD} ${SHLIB_LD_FLAGS}" + DL_LIBS="-ldl" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + TCL_NEEDS_EXP_FILE=1 + TCL_EXPORT_FILE_SUFFIX='${PACKAGE_VERSION}.exp' + fi + + # On AIX <=v4 systems, libbsd.a has to be linked in to support + # non-blocking file IO. This library has to be linked in after + # the MATH_LIBS or it breaks the pow() function. The way to + # insure proper sequencing, is to add it to the tail of MATH_LIBS. + # This library also supplies gettimeofday. + # + # AIX does not have a timezone field in struct tm. When the AIX + # bsd library is used, the timezone global and the gettimeofday + # methods are to be avoided for timezone deduction instead, we + # deduce the timezone by comparing the localtime result on a + # known GMT value. + + echo "$as_me:$LINENO: checking for gettimeofday in -lbsd" >&5 +echo $ECHO_N "checking for gettimeofday in -lbsd... $ECHO_C" >&6 +if test "${ac_cv_lib_bsd_gettimeofday+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lbsd $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char gettimeofday (); +int +main () +{ +gettimeofday (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_bsd_gettimeofday=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_bsd_gettimeofday=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gettimeofday" >&5 +echo "${ECHO_T}$ac_cv_lib_bsd_gettimeofday" >&6 +if test $ac_cv_lib_bsd_gettimeofday = yes; then + libbsd=yes +else + libbsd=no +fi + + if test $libbsd = yes; then + MATH_LIBS="$MATH_LIBS -lbsd" + +cat >>confdefs.h <<\_ACEOF +#define USE_DELTA_FOR_TZ 1 +_ACEOF + + fi + ;; + BeOS*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="${CC} -nostart" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + ;; + BSD/OS-2.1*|BSD/OS-3*) + SHLIB_CFLAGS="" + SHLIB_LD="shlicc -r" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LD_SEARCH_FLAGS="" + ;; + BSD/OS-4.*) + SHLIB_CFLAGS="-export-dynamic -fPIC" + SHLIB_LD="cc -shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="$LDFLAGS -export-dynamic" + LD_SEARCH_FLAGS="" + ;; + dgux*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LD_SEARCH_FLAGS="" + ;; + HP-UX-*.11.*) + # Use updated header definitions where possible + +cat >>confdefs.h <<\_ACEOF +#define _XOPEN_SOURCE_EXTENDED 1 +_ACEOF + + + SHLIB_SUFFIX=".sl" + echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +int +main () +{ +shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_shl_load=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dld_shl_load=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +if test $ac_cv_lib_dld_shl_load = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = yes; then + SHLIB_CFLAGS="+z" + SHLIB_LD="ld -b" + SHLIB_LD_LIBS='${LIBS}' + DL_OBJS="tclLoadShl.o" + DL_LIBS="-ldld" + LDFLAGS="$LDFLAGS -Wl,-E" + LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' + LD_LIBRARY_PATH_VAR="SHLIB_PATH" + fi + if test "$GCC" = "yes" ; then + SHLIB_LD="gcc -shared" + SHLIB_LD_LIBS='${LIBS}' + LD_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' + fi + + # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc + #CFLAGS="$CFLAGS +DAportable" + + # Check to enable 64-bit flags for compiler/linker + if test "$do64bit" = "yes" ; then + if test "$GCC" = "yes" ; then + hpux_arch=`${CC} -dumpmachine` + case $hpux_arch in + hppa64*) + # 64-bit gcc in use. Fix flags for GNU ld. + do64bit_ok=yes + SHLIB_LD="${CC} -shared" + SHLIB_LD_LIBS='${LIBS}' + ;; + *) + { echo "$as_me:$LINENO: WARNING: \"64bit mode not supported with GCC on $system\"" >&5 +echo "$as_me: WARNING: \"64bit mode not supported with GCC on $system\"" >&2;} + ;; + esac + else + do64bit_ok=yes + CFLAGS="$CFLAGS +DD64" + LDFLAGS="$LDFLAGS +DD64" + fi + fi + ;; + HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*) + SHLIB_SUFFIX=".sl" + echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +int +main () +{ +shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_shl_load=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dld_shl_load=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +if test $ac_cv_lib_dld_shl_load = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = yes; then + SHLIB_CFLAGS="+z" + SHLIB_LD="ld -b" + SHLIB_LD_LIBS="" + DL_OBJS="tclLoadShl.o" + DL_LIBS="-ldld" + LDFLAGS="$LDFLAGS -Wl,-E" + LD_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' + fi + LD_LIBRARY_PATH_VAR="SHLIB_PATH" + ;; + IRIX-4.*) + SHLIB_CFLAGS="-G 0" + SHLIB_SUFFIX=".a" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" + SHLIB_LD_LIBS='${LIBS}' + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LDFLAGS="$LDFLAGS -Wl,-D,08000000" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + SHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a' + ;; + IRIX-5.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -shared -rdata_shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + ;; + IRIX-6.*|IRIX64-6.5*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + if test "$GCC" = "yes" ; then + CFLAGS="$CFLAGS -mabi=n32" + LDFLAGS="$LDFLAGS -mabi=n32" + else + case $system in + IRIX-6.3) + # Use to build 6.2 compatible binaries on 6.3. + CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS" + ;; + *) + CFLAGS="$CFLAGS -n32" + ;; + esac + LDFLAGS="$LDFLAGS -n32" + fi + ;; + IRIX64-6.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + + # Check to enable 64-bit flags for compiler/linker + + if test "$do64bit" = "yes" ; then + if test "$GCC" = "yes" ; then + { echo "$as_me:$LINENO: WARNING: 64bit mode not supported by gcc" >&5 +echo "$as_me: WARNING: 64bit mode not supported by gcc" >&2;} + else + do64bit_ok=yes + SHLIB_LD="ld -64 -shared -rdata_shared" + CFLAGS="$CFLAGS -64" + LDFLAGS="$LDFLAGS -64" + fi + fi + ;; + Linux*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + + CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" + # egcs-2.91.66 on Redhat Linux 6.0 generates lots of warnings + # when you inline the string and math operations. Turn this off to + # get rid of the warnings. + + #CFLAGS_OPTIMIZE="${CFLAGS_OPTIMIZE} -D__NO_STRING_INLINES -D__NO_MATH_INLINES" + + if test "$have_dl" = yes; then + SHLIB_LD="${CC} -shared" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="$LDFLAGS -Wl,--export-dynamic" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + else + if test "${ac_cv_header_dld_h+set}" = set; then + echo "$as_me:$LINENO: checking for dld.h" >&5 +echo $ECHO_N "checking for dld.h... $ECHO_C" >&6 +if test "${ac_cv_header_dld_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dld_h" >&5 +echo "${ECHO_T}$ac_cv_header_dld_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking dld.h usability" >&5 +echo $ECHO_N "checking dld.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking dld.h presence" >&5 +echo $ECHO_N "checking dld.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: dld.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: dld.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: dld.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: dld.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: dld.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: dld.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: dld.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: dld.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: dld.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: dld.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: dld.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: dld.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: dld.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: dld.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: dld.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: dld.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------------- ## +## Report this to the filemonitor lists. ## +## -------------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for dld.h" >&5 +echo $ECHO_N "checking for dld.h... $ECHO_C" >&6 +if test "${ac_cv_header_dld_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_dld_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dld_h" >&5 +echo "${ECHO_T}$ac_cv_header_dld_h" >&6 + +fi +if test $ac_cv_header_dld_h = yes; then + + SHLIB_LD="ld -shared" + DL_OBJS="tclLoadDld.o" + DL_LIBS="-ldld" + LD_SEARCH_FLAGS="" +fi + + + fi + if test "`uname -m`" = "alpha" ; then + CFLAGS="$CFLAGS -mieee" + fi + + # The combo of gcc + glibc has a bug related + # to inlining of functions like strtod(). The + # -fno-builtin flag should address this problem + # but it does not work. The -fno-inline flag + # is kind of overkill but it works. + # Disable inlining only when one of the + # files in compat/*.c is being linked in. + if test x"${USE_COMPAT}" != x ; then + CFLAGS="$CFLAGS -fno-inline" + fi + + ;; + GNU*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + + if test "$have_dl" = yes; then + SHLIB_LD="${CC} -shared" + DL_OBJS="" + DL_LIBS="-ldl" + LDFLAGS="$LDFLAGS -Wl,--export-dynamic" + LD_SEARCH_FLAGS="" + else + if test "${ac_cv_header_dld_h+set}" = set; then + echo "$as_me:$LINENO: checking for dld.h" >&5 +echo $ECHO_N "checking for dld.h... $ECHO_C" >&6 +if test "${ac_cv_header_dld_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dld_h" >&5 +echo "${ECHO_T}$ac_cv_header_dld_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking dld.h usability" >&5 +echo $ECHO_N "checking dld.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking dld.h presence" >&5 +echo $ECHO_N "checking dld.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: dld.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: dld.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: dld.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: dld.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: dld.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: dld.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: dld.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: dld.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: dld.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: dld.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: dld.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: dld.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: dld.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: dld.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: dld.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: dld.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------------- ## +## Report this to the filemonitor lists. ## +## -------------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for dld.h" >&5 +echo $ECHO_N "checking for dld.h... $ECHO_C" >&6 +if test "${ac_cv_header_dld_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_dld_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dld_h" >&5 +echo "${ECHO_T}$ac_cv_header_dld_h" >&6 + +fi +if test $ac_cv_header_dld_h = yes; then + + SHLIB_LD="ld -shared" + DL_OBJS="" + DL_LIBS="-ldld" + LD_SEARCH_FLAGS="" +fi + + + fi + if test "`uname -m`" = "alpha" ; then + CFLAGS="$CFLAGS -mieee" + fi + ;; + MP-RAS-02*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LD_SEARCH_FLAGS="" + ;; + MP-RAS-*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="$LDFLAGS -Wl,-Bexport" + LD_SEARCH_FLAGS="" + ;; + NetBSD-*|FreeBSD-[1-2].*) + # Not available on all versions: check for include file. + if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo "$as_me:$LINENO: checking for dlfcn.h" >&5 +echo $ECHO_N "checking for dlfcn.h... $ECHO_C" >&6 +if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5 +echo "${ECHO_T}$ac_cv_header_dlfcn_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking dlfcn.h usability" >&5 +echo $ECHO_N "checking dlfcn.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking dlfcn.h presence" >&5 +echo $ECHO_N "checking dlfcn.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: dlfcn.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: dlfcn.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: dlfcn.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: dlfcn.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: dlfcn.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: dlfcn.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: dlfcn.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------------- ## +## Report this to the filemonitor lists. ## +## -------------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for dlfcn.h" >&5 +echo $ECHO_N "checking for dlfcn.h... $ECHO_C" >&6 +if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_dlfcn_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5 +echo "${ECHO_T}$ac_cv_header_dlfcn_h" >&6 + +fi +if test $ac_cv_header_dlfcn_h = yes; then + + # NetBSD/SPARC needs -fPIC, -fpic will not do. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + echo "$as_me:$LINENO: checking for ELF" >&5 +echo $ECHO_N "checking for ELF... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +#ifdef __ELF__ + yes +#endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "yes" >/dev/null 2>&1; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so' +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0' + +fi +rm -f conftest* + + +else + + SHLIB_CFLAGS="" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".a" + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + +fi + + + + # FreeBSD doesn't handle version numbers with dots. + + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + OpenBSD-*) + SHLIB_LD="${CC} -shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS="" + echo "$as_me:$LINENO: checking for ELF" >&5 +echo $ECHO_N "checking for ELF... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +#ifdef __ELF__ + yes +#endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "yes" >/dev/null 2>&1; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0' +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0' + +fi +rm -f conftest* + + + # OpenBSD doesn't do version numbers with dots. + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + FreeBSD-*) + # FreeBSD 3.* and greater have ELF. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="$LDFLAGS -export-dynamic" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + if test "${TCL_THREADS}" = "1" ; then + # The -pthread needs to go in the CFLAGS, not LIBS + LIBS=`echo $LIBS | sed s/-pthread//` + CFLAGS="$CFLAGS -pthread" + LDFLAGS="$LDFLAGS -pthread" + fi + case $system in + FreeBSD-3.*) + # FreeBSD-3 doesn't handle version numbers with dots. + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so' + TCL_LIB_VERSIONS_OK=nodots + ;; + esac + ;; + Darwin-*) + CFLAGS_OPTIMIZE="-Os" + SHLIB_CFLAGS="-fno-common" + SHLIB_LD="cc -dynamiclib \${LDFLAGS}" + echo "$as_me:$LINENO: checking if ld accepts -single_module flag" >&5 +echo $ECHO_N "checking if ld accepts -single_module flag... $ECHO_C" >&6 +if test "${tcl_cv_ld_single_module+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +int i; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_ld_single_module=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_ld_single_module=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$hold_ldflags +fi +echo "$as_me:$LINENO: result: $tcl_cv_ld_single_module" >&5 +echo "${ECHO_T}$tcl_cv_ld_single_module" >&6 + if test $tcl_cv_ld_single_module = yes; then + SHLIB_LD="${SHLIB_LD} -Wl,-single_module" + fi + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".dylib" + DL_OBJS="tclLoadDyld.o" + DL_LIBS="" + LDFLAGS="$LDFLAGS -prebind" + echo "$as_me:$LINENO: checking if ld accepts -search_paths_first flag" >&5 +echo $ECHO_N "checking if ld accepts -search_paths_first flag... $ECHO_C" >&6 +if test "${tcl_cv_ld_search_paths_first+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-search_paths_first" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +int i; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_ld_search_paths_first=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_ld_search_paths_first=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$hold_ldflags +fi +echo "$as_me:$LINENO: result: $tcl_cv_ld_search_paths_first" >&5 +echo "${ECHO_T}$tcl_cv_ld_search_paths_first" >&6 + if test $tcl_cv_ld_search_paths_first = yes; then + LDFLAGS="$LDFLAGS -Wl,-search_paths_first" + fi + LD_SEARCH_FLAGS="" + LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" + ;; + NEXTSTEP-*) + SHLIB_CFLAGS="" + SHLIB_LD="cc -nostdlib -r" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadNext.o" + DL_LIBS="" + LD_SEARCH_FLAGS="" + ;; + OS/390-*) + CFLAGS_OPTIMIZE="" # Optimizer is buggy + +cat >>confdefs.h <<\_ACEOF +#define _OE_SOCKETS 1 +_ACEOF + + ;; + OSF1-1.0|OSF1-1.1|OSF1-1.2) + # OSF/1 1.[012] from OSF, and derivatives, including Paragon OSF/1 + SHLIB_CFLAGS="" + # Hack: make package name same as library name + SHLIB_LD='ld -R -export :' + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadOSF.o" + DL_LIBS="" + LD_SEARCH_FLAGS="" + ;; + OSF1-1.*) + # OSF/1 1.3 from OSF using ELF, and derivatives, including AD2 + SHLIB_CFLAGS="-fPIC" + if test "$SHARED_BUILD" = "1" ; then + SHLIB_LD="ld -shared" + else + SHLIB_LD="ld -non_shared" + fi + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS="" + ;; + OSF1-V*) + # Digital OSF/1 + SHLIB_CFLAGS="" + if test "$SHARED_BUILD" = "1" ; then + SHLIB_LD='ld -shared -expect_unresolved "*"' + else + SHLIB_LD='ld -non_shared -expect_unresolved "*"' + fi + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' + if test "$GCC" = "yes" ; then + CFLAGS="$CFLAGS -mieee" + else + CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee" + fi + # see pthread_intro(3) for pthread support on osf1, k.furukawa + if test "${TCL_THREADS}" = "1" ; then + CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" + CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" + LIBS=`echo $LIBS | sed s/-lpthreads//` + if test "$GCC" = "yes" ; then + LIBS="$LIBS -lpthread -lmach -lexc" + else + CFLAGS="$CFLAGS -pthread" + LDFLAGS="$LDFLAGS -pthread" + fi + fi + + ;; + QNX-6*) + # QNX RTP + # This may work for all QNX, but it was only reported for v6. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + # dlopen is in -lc on QNX + DL_LIBS="" + LD_SEARCH_FLAGS="" + ;; + RISCos-*) + SHLIB_CFLAGS="-G 0" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".a" + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LDFLAGS="$LDFLAGS -Wl,-D,08000000" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + ;; + SCO_SV-3.2*) + # Note, dlopen is available only on SCO 3.2.5 and greater. However, + # this test works, since "uname -s" was non-standard in 3.2.4 and + # below. + if test "$GCC" = "yes" ; then + SHLIB_CFLAGS="-fPIC -melf" + LDFLAGS="$LDFLAGS -melf -Wl,-Bexport" + else + SHLIB_CFLAGS="-Kpic -belf" + LDFLAGS="$LDFLAGS -belf -Wl,-Bexport" + fi + SHLIB_LD="ld -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS="" + ;; + SINIX*5.4*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LD_SEARCH_FLAGS="" + ;; + SunOS-4*) + SHLIB_CFLAGS="-PIC" + SHLIB_LD="ld" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + + # SunOS can't handle version numbers with dots in them in library + # specs, like -ltcl7.5, so use -ltcl75 instead. Also, it + # requires an extra version number at the end of .so file names. + # So, the library has to have a name like libtcl75.so.1.0 + + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0' + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + SunOS-5.[0-6]*) + + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + +cat >>confdefs.h <<\_ACEOF +#define _REENTRANT 1 +_ACEOF + + +cat >>confdefs.h <<\_ACEOF +#define _POSIX_PTHREAD_SEMANTICS 1 +_ACEOF + + + SHLIB_CFLAGS="-KPIC" + + # Note: need the LIBS below, otherwise Tk won't find Tcl's + # symbols when dynamically loaded into tclsh. + + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + if test "$GCC" = "yes" ; then + SHLIB_LD="$CC -shared" + LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + else + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + fi + ;; + SunOS-5*) + + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + +cat >>confdefs.h <<\_ACEOF +#define _REENTRANT 1 +_ACEOF + + +cat >>confdefs.h <<\_ACEOF +#define _POSIX_PTHREAD_SEMANTICS 1 +_ACEOF + + + SHLIB_CFLAGS="-KPIC" + + # Check to enable 64-bit flags for compiler/linker + if test "$do64bit" = "yes" ; then + arch=`isainfo` + if test "$arch" = "sparcv9 sparc" ; then + if test "$GCC" = "yes" ; then + if test "`gcc -dumpversion` | awk -F. '{print }'" -lt "3" ; then + { echo "$as_me:$LINENO: WARNING: 64bit mode not supported with GCC < 3.2 on $system" >&5 +echo "$as_me: WARNING: 64bit mode not supported with GCC < 3.2 on $system" >&2;} + else + do64bit_ok=yes + CFLAGS="$CFLAGS -m64 -mcpu=v9" + LDFLAGS="$LDFLAGS -m64 -mcpu=v9" + SHLIB_CFLAGS="-fPIC" + fi + else + do64bit_ok=yes + if test "$do64bitVIS" = "yes" ; then + CFLAGS="$CFLAGS -xarch=v9a" + LDFLAGS="$LDFLAGS -xarch=v9a" + else + CFLAGS="$CFLAGS -xarch=v9" + LDFLAGS="$LDFLAGS -xarch=v9" + fi + fi + else + { echo "$as_me:$LINENO: WARNING: \"64bit mode only supported sparcv9 system\"" >&5 +echo "$as_me: WARNING: \"64bit mode only supported sparcv9 system\"" >&2;} + fi + fi + + # Note: need the LIBS below, otherwise Tk won't find Tcl's + # symbols when dynamically loaded into tclsh. + + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + if test "$GCC" = "yes" ; then + SHLIB_LD="$CC -shared" + LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + if test "$do64bit" = "yes" ; then + # We need to specify -static-libgcc or we need to + # add the path to the sparv9 libgcc. + # JH: static-libgcc is necessary for core Tcl, but may + # not be necessary for extensions. + SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc" + # for finding sparcv9 libgcc, get the regular libgcc + # path, remove so name and append 'sparcv9' + #v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..." + #LD_SEARCH_FLAGS="${LD_SEARCH_FLAGS},-R,$v9gcclibdir" + fi + else + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + fi + ;; + ULTRIX-4.*) + SHLIB_CFLAGS="-G 0" + SHLIB_SUFFIX=".a" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" + SHLIB_LD_LIBS='${LIBS}' + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LDFLAGS="$LDFLAGS -Wl,-D,08000000" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + if test "$GCC" != "yes" ; then + CFLAGS="$CFLAGS -DHAVE_TZSET -std1" + fi + ;; + UNIX_SV* | UnixWare-5*) + SHLIB_CFLAGS="-KPIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers + # that don't grok the -Bexport option. Test that it does. + hold_ldflags=$LDFLAGS + echo "$as_me:$LINENO: checking for ld accepts -Bexport flag" >&5 +echo $ECHO_N "checking for ld accepts -Bexport flag... $ECHO_C" >&6 + LDFLAGS="$LDFLAGS -Wl,-Bexport" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +int i; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + found=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +LDFLAGS=$hold_ldflags found=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + echo "$as_me:$LINENO: result: $found" >&5 +echo "${ECHO_T}$found" >&6 + LD_SEARCH_FLAGS="" + ;; + esac + + if test "$do64bit" = "yes" -a "$do64bit_ok" = "no" ; then + { echo "$as_me:$LINENO: WARNING: \"64bit support being disabled -- don\'t know magic for this platform\"" >&5 +echo "$as_me: WARNING: \"64bit support being disabled -- don\'t know magic for this platform\"" >&2;} + fi + + # Step 4: If pseudo-static linking is in use (see K. B. Kenny, "Dynamic + # Loading for Tcl -- What Became of It?". Proc. 2nd Tcl/Tk Workshop, + # New Orleans, LA, Computerized Processes Unlimited, 1994), then we need + # to determine which of several header files defines the a.out file + # format (a.out.h, sys/exec.h, or sys/exec_aout.h). At present, we + # support only a file format that is more or less version-7-compatible. + # In particular, + # - a.out files must begin with `struct exec'. + # - the N_TXTOFF on the `struct exec' must compute the seek address + # of the text segment + # - The `struct exec' must contain a_magic, a_text, a_data, a_bss + # and a_entry fields. + # The following compilation should succeed if and only if either sys/exec.h + # or a.out.h is usable for the purpose. + # + # Note that the modified COFF format used on MIPS Ultrix 4.x is usable; the + # `struct exec' includes a second header that contains information that + # duplicates the v7 fields that are needed. + + if test "x$DL_OBJS" = "xtclLoadAout.o" ; then + echo "$as_me:$LINENO: checking sys/exec.h" >&5 +echo $ECHO_N "checking sys/exec.h... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ + + struct exec foo; + unsigned long seek; + int flag; +#if defined(__mips) || defined(mips) + seek = N_TXTOFF (foo.ex_f, foo.ex_o); +#else + seek = N_TXTOFF (foo); +#endif + flag = (foo.a_magic == OMAGIC); + return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_ok=usable +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_ok=unusable +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + echo "$as_me:$LINENO: result: $tcl_ok" >&5 +echo "${ECHO_T}$tcl_ok" >&6 + if test $tcl_ok = usable; then + +cat >>confdefs.h <<\_ACEOF +#define USE_SYS_EXEC_H 1 +_ACEOF + + else + echo "$as_me:$LINENO: checking a.out.h" >&5 +echo $ECHO_N "checking a.out.h... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ + + struct exec foo; + unsigned long seek; + int flag; +#if defined(__mips) || defined(mips) + seek = N_TXTOFF (foo.ex_f, foo.ex_o); +#else + seek = N_TXTOFF (foo); +#endif + flag = (foo.a_magic == OMAGIC); + return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_ok=usable +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_ok=unusable +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + echo "$as_me:$LINENO: result: $tcl_ok" >&5 +echo "${ECHO_T}$tcl_ok" >&6 + if test $tcl_ok = usable; then + +cat >>confdefs.h <<\_ACEOF +#define USE_A_OUT_H 1 +_ACEOF + + else + echo "$as_me:$LINENO: checking sys/exec_aout.h" >&5 +echo $ECHO_N "checking sys/exec_aout.h... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ + + struct exec foo; + unsigned long seek; + int flag; +#if defined(__mips) || defined(mips) + seek = N_TXTOFF (foo.ex_f, foo.ex_o); +#else + seek = N_TXTOFF (foo); +#endif + flag = (foo.a_midmag == OMAGIC); + return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_ok=usable +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_ok=unusable +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + echo "$as_me:$LINENO: result: $tcl_ok" >&5 +echo "${ECHO_T}$tcl_ok" >&6 + if test $tcl_ok = usable; then + +cat >>confdefs.h <<\_ACEOF +#define USE_SYS_EXEC_AOUT_H 1 +_ACEOF + + else + DL_OBJS="" + fi + fi + fi + fi + + # Step 5: disable dynamic loading if requested via a command-line switch. + + # Check whether --enable-load or --disable-load was given. +if test "${enable_load+set}" = set; then + enableval="$enable_load" + tcl_ok=$enableval +else + tcl_ok=yes +fi; + if test "$tcl_ok" = "no"; then + DL_OBJS="" + fi + + if test "x$DL_OBJS" != "x" ; then + BUILD_DLTEST="\$(DLTEST_TARGETS)" + else + echo "Can't figure out how to do dynamic loading or shared libraries" + echo "on this system." + SHLIB_CFLAGS="" + SHLIB_LD="" + SHLIB_SUFFIX="" + DL_OBJS="tclLoadNone.o" + DL_LIBS="" + LDFLAGS="$LDFLAGS_ORIG" + LD_SEARCH_FLAGS="" + BUILD_DLTEST="" + fi + + # If we're running gcc, then change the C flags for compiling shared + # libraries to the right flags for gcc, instead of those for the + # standard manufacturer compiler. + + if test "$DL_OBJS" != "tclLoadNone.o" ; then + if test "$GCC" = "yes" ; then + case $system in + AIX-*) + ;; + BSD/OS*) + ;; + IRIX*) + ;; + NetBSD-*|FreeBSD-*) + ;; + Darwin-*) + ;; + RISCos-*) + ;; + SCO_SV-3.2*) + ;; + ULTRIX-4.*) + ;; + windows) + ;; + *) + SHLIB_CFLAGS="-fPIC" + ;; + esac + fi + fi + + if test "$SHARED_LIB_SUFFIX" = "" ; then + SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}' + fi + if test "$UNSHARED_LIB_SUFFIX" = "" ; then + UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a' + fi + + + + + + + + + + + + + + + # These must be called after we do the basic CFLAGS checks and + # verify any possible 64-bit or similar switches are necessary + + echo "$as_me:$LINENO: checking for required early compiler flags" >&5 +echo $ECHO_N "checking for required early compiler flags... $ECHO_C" >&6 + tcl_flags="" + + if test "${tcl_cv_flag__isoc99_source+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +char *p = (char *)strtoll; char *q = (char *)strtoull; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__isoc99_source=no +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#define _ISOC99_SOURCE 1 +#include +int +main () +{ +char *p = (char *)strtoll; char *q = (char *)strtoull; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__isoc99_source=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_flag__isoc99_source=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi + + if test "x${tcl_cv_flag__isoc99_source}" = "xyes" ; then + +cat >>confdefs.h <<\_ACEOF +#define _ISOC99_SOURCE 1 +_ACEOF + + tcl_flags="$tcl_flags _ISOC99_SOURCE" + fi + + + if test "${tcl_cv_flag__largefile64_source+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +struct stat64 buf; int i = stat64("/", &buf); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__largefile64_source=no +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#define _LARGEFILE64_SOURCE 1 +#include +int +main () +{ +struct stat64 buf; int i = stat64("/", &buf); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__largefile64_source=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_flag__largefile64_source=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi + + if test "x${tcl_cv_flag__largefile64_source}" = "xyes" ; then + +cat >>confdefs.h <<\_ACEOF +#define _LARGEFILE64_SOURCE 1 +_ACEOF + + tcl_flags="$tcl_flags _LARGEFILE64_SOURCE" + fi + + if test "x${tcl_flags}" = "x" ; then + echo "$as_me:$LINENO: result: none" >&5 +echo "${ECHO_T}none" >&6 + else + echo "$as_me:$LINENO: result: ${tcl_flags}" >&5 +echo "${ECHO_T}${tcl_flags}" >&6 + fi + + + echo "$as_me:$LINENO: checking for 64-bit integer type" >&5 +echo $ECHO_N "checking for 64-bit integer type... $ECHO_C" >&6 + if test "${tcl_cv_type_64bit+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + tcl_cv_type_64bit=none + # See if the compiler knows natively about __int64 + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +__int64 value = (__int64) 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_type_64bit=__int64 +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_type_64bit="long long" +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + # See if we should use long anyway Note that we substitute in the + # type that is our current guess for a 64-bit type inside this check + # program, so it should be modified only carefully... + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +switch (0) { + case 1: case (sizeof(${tcl_type_64bit})==sizeof(long)): ; + } + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_type_64bit=${tcl_type_64bit} +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi + + if test "${tcl_cv_type_64bit}" = none ; then + +cat >>confdefs.h <<\_ACEOF +#define TCL_WIDE_INT_IS_LONG 1 +_ACEOF + + echo "$as_me:$LINENO: result: using long" >&5 +echo "${ECHO_T}using long" >&6 + elif test "${tcl_cv_type_64bit}" = "__int64" \ + -a "${TEA_PLATFORM}" = "windows" ; then + # We actually want to use the default tcl.h checks in this + # case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER* + echo "$as_me:$LINENO: result: using Tcl header defaults" >&5 +echo "${ECHO_T}using Tcl header defaults" >&6 + else + +cat >>confdefs.h <<_ACEOF +#define TCL_WIDE_INT_TYPE ${tcl_cv_type_64bit} +_ACEOF + + echo "$as_me:$LINENO: result: ${tcl_cv_type_64bit}" >&5 +echo "${ECHO_T}${tcl_cv_type_64bit}" >&6 + + # Now check for auxiliary declarations + echo "$as_me:$LINENO: checking for struct dirent64" >&5 +echo $ECHO_N "checking for struct dirent64... $ECHO_C" >&6 + if test "${tcl_cv_struct_dirent64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +int +main () +{ +struct dirent64 p; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_struct_dirent64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_struct_dirent64=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi + + if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_STRUCT_DIRENT64 1 +_ACEOF + + fi + echo "$as_me:$LINENO: result: ${tcl_cv_struct_dirent64}" >&5 +echo "${ECHO_T}${tcl_cv_struct_dirent64}" >&6 + + echo "$as_me:$LINENO: checking for struct stat64" >&5 +echo $ECHO_N "checking for struct stat64... $ECHO_C" >&6 + if test "${tcl_cv_struct_stat64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +struct stat64 p; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_struct_stat64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_struct_stat64=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi + + if test "x${tcl_cv_struct_stat64}" = "xyes" ; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_STRUCT_STAT64 1 +_ACEOF + + fi + echo "$as_me:$LINENO: result: ${tcl_cv_struct_stat64}" >&5 +echo "${ECHO_T}${tcl_cv_struct_stat64}" >&6 + + echo "$as_me:$LINENO: checking for off64_t" >&5 +echo $ECHO_N "checking for off64_t... $ECHO_C" >&6 + if test "${tcl_cv_type_off64_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +off64_t offset; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_type_off64_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_type_off64_t=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi + + if test "x${tcl_cv_type_off64_t}" = "xyes" ; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_TYPE_OFF64_T 1 +_ACEOF + + fi + echo "$as_me:$LINENO: result: ${tcl_cv_type_off64_t}" >&5 +echo "${ECHO_T}${tcl_cv_type_off64_t}" >&6 + fi + + + +#-------------------------------------------------------------------- +# Set the default compiler switches based on the --enable-symbols option. +#-------------------------------------------------------------------- + + + + + DBGX="" + + echo "$as_me:$LINENO: checking for build with symbols" >&5 +echo $ECHO_N "checking for build with symbols... $ECHO_C" >&6 + # Check whether --enable-symbols or --disable-symbols was given. +if test "${enable_symbols+set}" = set; then + enableval="$enable_symbols" + tcl_ok=$enableval +else + tcl_ok=no +fi; + if test "$tcl_ok" = "no"; then + CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}" + LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + else + CFLAGS_DEFAULT="${CFLAGS_DEBUG}" + LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" + if test "$tcl_ok" = "yes"; then + echo "$as_me:$LINENO: result: yes (standard debugging)" >&5 +echo "${ECHO_T}yes (standard debugging)" >&6 + fi + fi + if test "${TEA_PLATFORM}" != "windows" ; then + LDFLAGS_DEFAULT="${LDFLAGS}" + fi + + + + + + if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then + +cat >>confdefs.h <<\_ACEOF +#define TCL_MEM_DEBUG 1 +_ACEOF + + fi + + if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then + if test "$tcl_ok" = "all"; then + echo "$as_me:$LINENO: result: enabled symbols mem debugging" >&5 +echo "${ECHO_T}enabled symbols mem debugging" >&6 + else + echo "$as_me:$LINENO: result: enabled $tcl_ok debugging" >&5 +echo "${ECHO_T}enabled $tcl_ok debugging" >&6 + fi + fi + + +#-------------------------------------------------------------------- +# Everyone should be linking against the Tcl stub library. If you +# can't for some reason, remove this definition. If you aren't using +# stubs, you also need to modify the SHLIB_LD_LIBS setting below to +# link against the non-stubbed Tcl library. Add Tk too if necessary. +#-------------------------------------------------------------------- + +cat >>confdefs.h <<\_ACEOF +#define USE_TCL_STUBS 1 +_ACEOF + +#AC_DEFINE(USE_TK_STUBS) + +#-------------------------------------------------------------------- +# This macro generates a line to use when building a library. It +# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS, +# and TEA_LOAD_TCLCONFIG macros above. +#-------------------------------------------------------------------- + + + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then + MAKE_STATIC_LIB="\${STLIB_LD} -out:\$@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\$@ \$(PKG_OBJECTS)" + MAKE_STUB_LIB="\${STLIB_LD} -out:\$@ \$(PKG_STUB_OBJECTS)" + else + MAKE_STATIC_LIB="\${STLIB_LD} \$@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} -o \$@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}" + MAKE_STUB_LIB="\${STLIB_LD} \$@ \$(PKG_STUB_OBJECTS)" + fi + + if test "${SHARED_BUILD}" = "1" ; then + MAKE_LIB="${MAKE_SHARED_LIB} " + else + MAKE_LIB="${MAKE_STATIC_LIB} " + fi + + #-------------------------------------------------------------------- + # Shared libraries and static libraries have different names. + # Use the double eval to make sure any variables in the suffix is + # substituted. (@@@ Might not be necessary anymore) + #-------------------------------------------------------------------- + + if test "${TEA_PLATFORM}" = "windows" ; then + if test "${SHARED_BUILD}" = "1" ; then + # We force the unresolved linking of symbols that are really in + # the private libraries of Tcl and Tk. + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\"" + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\"" + fi + eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + else + eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + fi + # Some packages build there own stubs libraries + eval eval "PKG_STUB_LIB_FILE=${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + # These aren't needed on Windows (either MSVC or gcc) + RANLIB=: + RANLIB_STUB=: + else + RANLIB_STUB="${RANLIB}" + if test "${SHARED_BUILD}" = "1" ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}" + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}" + fi + eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + RANLIB=: + else + eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + fi + # Some packages build there own stubs libraries + eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + fi + + # These are escaped so that only CFLAGS is picked up at configure time. + # The other values will be substituted at make time. + CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}" + if test "${SHARED_BUILD}" = "1" ; then + CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}" + fi + + + + + + + + +#-------------------------------------------------------------------- +# Find tclsh so that we can run pkg_mkIndex to generate the pkgIndex.tcl +# file during the install process. Don't run the TCLSH_PROG through +# ${CYGPATH} because it's being used directly by make. +# Require that we use a tclsh shell version 8.2 or later since earlier +# versions have bugs in the pkg_mkIndex routine. +# Add WISH as well if this is a Tk extension. +#-------------------------------------------------------------------- + + + # Allow the user to provide this setting in the env + if test "x${TCLSH_PROG}" = "x" ; then + echo "$as_me:$LINENO: checking for tclsh" >&5 +echo $ECHO_N "checking for tclsh... $ECHO_C" >&6 + + if test "${ac_cv_path_tclsh+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + search_path=`echo ${PATH} | sed -e 's/:/ /g'` + if test "${TEA_PLATFORM}" != "windows" -o \ + \( "$do64bit_ok" = "no" -a "$doWince" = "no" \) ; then + # Do not allow target tclsh in known cross-compile builds, + # as we need one we can run on this system + search_path="${TCL_BIN_DIR} ${TCL_BIN_DIR}/../bin ${exec_prefix}/bin ${prefix}/bin ${search_path}" + fi + for dir in $search_path ; do + for j in `ls -r $dir/tclsh[8-9]*${EXEEXT} 2> /dev/null` \ + `ls -r $dir/tclsh*${EXEEXT} 2> /dev/null` ; do + if test x"$ac_cv_path_tclsh" = x ; then + if test -f "$j" ; then + ac_cv_path_tclsh=$j + break + fi + fi + done + done + +fi + + + if test -f "$ac_cv_path_tclsh" ; then + TCLSH_PROG=$ac_cv_path_tclsh + echo "$as_me:$LINENO: result: $TCLSH_PROG" >&5 +echo "${ECHO_T}$TCLSH_PROG" >&6 + else + { { echo "$as_me:$LINENO: error: No tclsh found in PATH: $search_path" >&5 +echo "$as_me: error: No tclsh found in PATH: $search_path" >&2;} + { (exit 1); exit 1; }; } + fi + fi + + +#TEA_PROG_WISH + +#-------------------------------------------------------------------- +# Finally, substitute all of the various values into the Makefile. +# You may alternatively have a special pkgIndex.tcl.in or other files +# which require substituting th AC variables in. Include these here. +#-------------------------------------------------------------------- + + ac_config_files="$ac_config_files Makefile" +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +{ + (set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} | + sed ' + t clear + : clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + : end' >>confcache +if diff $cache_file confcache >/dev/null 2>&1; then :; else + if test -w $cache_file; then + test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + cat confcache >$cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/; +s/:*\${srcdir}:*/:/; +s/:*@srcdir@:*/:/; +s/^\([^=]*=[ ]*\):*/\1/; +s/:*$//; +s/^[^=]*=[ ]*$//; +}' +fi + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +# +# If the first sed substitution is executed (which looks for macros that +# take arguments), then we branch to the quote section. Otherwise, +# look for a macro that doesn't take arguments. +cat >confdef2opt.sed <<\_ACEOF +t clear +: clear +s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g +t quote +s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g +t quote +d +: quote +s,[ `~#$^&*(){}\\|;'"<>?],\\&,g +s,\[,\\&,g +s,\],\\&,g +s,\$,$$,g +p +_ACEOF +# We use echo to avoid assuming a particular line-breaking character. +# The extra dot is to prevent the shell from consuming trailing +# line-breaks from the sub-command output. A line-break within +# single-quotes doesn't work because, if this script is created in a +# platform that uses two characters for line-breaks (e.g., DOS), tr +# would break. +ac_LF_and_DOT=`echo; echo .` +DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` +rm -f confdef2opt.sed + + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + +: ${CONFIG_STATUS=./config.status} +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + +exec 6>&1 + +# Open the log real soon, to keep \$[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. Logging --version etc. is OK. +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX +} >&5 +cat >&5 <<_CSEOF + +This file was extended by filemonitor $as_me 0.6, which was +generated by GNU Autoconf 2.59. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +_CSEOF +echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +echo >&5 +_ACEOF + +# Files that config.status was made for. +if test -n "$ac_config_files"; then + echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_headers"; then + echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_links"; then + echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_commands"; then + echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +fi + +cat >>$CONFIG_STATUS <<\_ACEOF + +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + +Configuration files: +$config_files + +Report bugs to ." +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +ac_cs_version="\\ +filemonitor config.status 0.6 +configured by $0, generated by GNU Autoconf 2.59, + with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" + +Copyright (C) 2003 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." +srcdir=$srcdir +INSTALL="$INSTALL" +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "x$1" : 'x\([^=]*\)='` + ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + ac_shift=: + ;; + -*) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + *) # This is not an option, so the user has probably given explicit + # arguments. + ac_option=$1 + ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --vers* | -V ) + echo "$ac_cs_version"; exit 0 ;; + --he | --h) + # Conflict between --help and --header + { { echo "$as_me:$LINENO: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + echo "$ac_cs_usage"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + +_ACEOF + + + + + +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_config_target in $ac_config_targets +do + case "$ac_config_target" in + # Handling of arguments. + "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason to put it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Create a temporary directory, and hook for its removal unless debugging. +$debug || +{ + trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} + +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./confstat$$-$RANDOM + (umask 077 && mkdir $tmp) +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF + +# +# CONFIG_FILES section. +# + +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "\$CONFIG_FILES"; then + # Protect against being on the right side of a sed subst in config.status. + sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; + s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +s,@SHELL@,$SHELL,;t t +s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +s,@exec_prefix@,$exec_prefix,;t t +s,@prefix@,$prefix,;t t +s,@program_transform_name@,$program_transform_name,;t t +s,@bindir@,$bindir,;t t +s,@sbindir@,$sbindir,;t t +s,@libexecdir@,$libexecdir,;t t +s,@datadir@,$datadir,;t t +s,@sysconfdir@,$sysconfdir,;t t +s,@sharedstatedir@,$sharedstatedir,;t t +s,@localstatedir@,$localstatedir,;t t +s,@libdir@,$libdir,;t t +s,@includedir@,$includedir,;t t +s,@oldincludedir@,$oldincludedir,;t t +s,@infodir@,$infodir,;t t +s,@mandir@,$mandir,;t t +s,@build_alias@,$build_alias,;t t +s,@host_alias@,$host_alias,;t t +s,@target_alias@,$target_alias,;t t +s,@DEFS@,$DEFS,;t t +s,@ECHO_C@,$ECHO_C,;t t +s,@ECHO_N@,$ECHO_N,;t t +s,@ECHO_T@,$ECHO_T,;t t +s,@LIBS@,$LIBS,;t t +s,@CYGPATH@,$CYGPATH,;t t +s,@EXEEXT@,$EXEEXT,;t t +s,@PKG_LIB_FILE@,$PKG_LIB_FILE,;t t +s,@PKG_STUB_LIB_FILE@,$PKG_STUB_LIB_FILE,;t t +s,@PKG_STUB_SOURCES@,$PKG_STUB_SOURCES,;t t +s,@PKG_STUB_OBJECTS@,$PKG_STUB_OBJECTS,;t t +s,@PKG_TCL_SOURCES@,$PKG_TCL_SOURCES,;t t +s,@PKG_HEADERS@,$PKG_HEADERS,;t t +s,@PKG_INCLUDES@,$PKG_INCLUDES,;t t +s,@PKG_LIBS@,$PKG_LIBS,;t t +s,@PKG_CFLAGS@,$PKG_CFLAGS,;t t +s,@TCL_VERSION@,$TCL_VERSION,;t t +s,@TCL_BIN_DIR@,$TCL_BIN_DIR,;t t +s,@TCL_SRC_DIR@,$TCL_SRC_DIR,;t t +s,@TCL_LIB_FILE@,$TCL_LIB_FILE,;t t +s,@TCL_LIB_FLAG@,$TCL_LIB_FLAG,;t t +s,@TCL_LIB_SPEC@,$TCL_LIB_SPEC,;t t +s,@TCL_STUB_LIB_FILE@,$TCL_STUB_LIB_FILE,;t t +s,@TCL_STUB_LIB_FLAG@,$TCL_STUB_LIB_FLAG,;t t +s,@TCL_STUB_LIB_SPEC@,$TCL_STUB_LIB_SPEC,;t t +s,@TCL_LIBS@,$TCL_LIBS,;t t +s,@TCL_DEFS@,$TCL_DEFS,;t t +s,@TCL_EXTRA_CFLAGS@,$TCL_EXTRA_CFLAGS,;t t +s,@TCL_LD_FLAGS@,$TCL_LD_FLAGS,;t t +s,@TCL_SHLIB_LD_LIBS@,$TCL_SHLIB_LD_LIBS,;t t +s,@CC@,$CC,;t t +s,@CFLAGS@,$CFLAGS,;t t +s,@LDFLAGS@,$LDFLAGS,;t t +s,@CPPFLAGS@,$CPPFLAGS,;t t +s,@ac_ct_CC@,$ac_ct_CC,;t t +s,@OBJEXT@,$OBJEXT,;t t +s,@CPP@,$CPP,;t t +s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t +s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t +s,@INSTALL_DATA@,$INSTALL_DATA,;t t +s,@SET_MAKE@,$SET_MAKE,;t t +s,@RANLIB@,$RANLIB,;t t +s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t +s,@EGREP@,$EGREP,;t t +s,@MATH_LIBS@,$MATH_LIBS,;t t +s,@PKG_SOURCES@,$PKG_SOURCES,;t t +s,@PKG_OBJECTS@,$PKG_OBJECTS,;t t +s,@CLEANFILES@,$CLEANFILES,;t t +s,@TCL_INCLUDES@,$TCL_INCLUDES,;t t +s,@TCL_THREADS@,$TCL_THREADS,;t t +s,@SHARED_BUILD@,$SHARED_BUILD,;t t +s,@AR@,$AR,;t t +s,@TCLSH_PROG@,$TCLSH_PROG,;t t +s,@CELIB_DIR@,$CELIB_DIR,;t t +s,@LIBOBJS@,$LIBOBJS,;t t +s,@DL_LIBS@,$DL_LIBS,;t t +s,@CFLAGS_DEBUG@,$CFLAGS_DEBUG,;t t +s,@CFLAGS_OPTIMIZE@,$CFLAGS_OPTIMIZE,;t t +s,@CFLAGS_WARNING@,$CFLAGS_WARNING,;t t +s,@STLIB_LD@,$STLIB_LD,;t t +s,@SHLIB_LD@,$SHLIB_LD,;t t +s,@SHLIB_CFLAGS@,$SHLIB_CFLAGS,;t t +s,@SHLIB_LD_LIBS@,$SHLIB_LD_LIBS,;t t +s,@LDFLAGS_DEBUG@,$LDFLAGS_DEBUG,;t t +s,@LDFLAGS_OPTIMIZE@,$LDFLAGS_OPTIMIZE,;t t +s,@LD_LIBRARY_PATH_VAR@,$LD_LIBRARY_PATH_VAR,;t t +s,@TCL_DBGX@,$TCL_DBGX,;t t +s,@CFLAGS_DEFAULT@,$CFLAGS_DEFAULT,;t t +s,@LDFLAGS_DEFAULT@,$LDFLAGS_DEFAULT,;t t +s,@MAKE_LIB@,$MAKE_LIB,;t t +s,@MAKE_SHARED_LIB@,$MAKE_SHARED_LIB,;t t +s,@MAKE_STATIC_LIB@,$MAKE_STATIC_LIB,;t t +s,@MAKE_STUB_LIB@,$MAKE_STUB_LIB,;t t +s,@RANLIB_STUB@,$RANLIB_STUB,;t t +s,@LTLIBOBJS@,$LTLIBOBJS,;t t +CEOF + +_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF + # Split the substitutions into bite-sized pieces for seds with + # small command number limits, like on Digital OSF/1 and HP-UX. + ac_max_sed_lines=48 + ac_sed_frag=1 # Number of current file. + ac_beg=1 # First line for current file. + ac_end=$ac_max_sed_lines # Line after last line for current file. + ac_more_lines=: + ac_sed_cmds= + while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + else + sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + fi + if test ! -s $tmp/subs.frag; then + ac_more_lines=false + else + # The purpose of the label and of the branching condition is to + # speed up the sed processing (if there are no `@' at all, there + # is no need to browse any of the substitutions). + # These are the two extra sed commands mentioned above. + (echo ':t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" + else + ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" + fi + ac_sed_frag=`expr $ac_sed_frag + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_lines` + fi + done + if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat + fi +fi # test -n "$CONFIG_FILES" + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; + esac + + # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_builddir$INSTALL ;; + esac + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + configure_input= + else + configure_input="$ac_file. " + fi + configure_input=$configure_input"Generated from `echo $ac_file_in | + sed 's,.*/,,'` by configure." + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + echo "$f";; + *) # Relative + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } + + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s,@configure_input@,$configure_input,;t t +s,@srcdir@,$ac_srcdir,;t t +s,@abs_srcdir@,$ac_abs_srcdir,;t t +s,@top_srcdir@,$ac_top_srcdir,;t t +s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +s,@builddir@,$ac_builddir,;t t +s,@abs_builddir@,$ac_abs_builddir,;t t +s,@top_builddir@,$ac_top_builddir,;t t +s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +s,@INSTALL@,$ac_INSTALL,;t t +" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out + rm -f $tmp/stdin + if test x"$ac_file" != x-; then + mv $tmp/out $ac_file + else + cat $tmp/out + rm -f $tmp/out + fi + +done +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF + +{ (exit 0); exit 0; } +_ACEOF +chmod +x $CONFIG_STATUS +ac_clean_files=$ac_clean_files_save + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi + diff --git a/configure.in b/configure.in new file mode 100755 index 0000000..738a010 --- /dev/null +++ b/configure.in @@ -0,0 +1,195 @@ +#!/bin/bash -norc +dnl This file is an input file used by the GNU "autoconf" program to +dnl generate the file "configure", which is run during Tcl installation +dnl to configure the system for the local environment. +# +# RCS: @(#) $Id$ + +#----------------------------------------------------------------------- +# Sample configure.in for Tcl Extensions. The only places you should +# need to modify this file are marked by the string __CHANGE__ +#----------------------------------------------------------------------- + +#----------------------------------------------------------------------- +# __CHANGE__ +# Set your package name and version numbers here. +# +# This initializes the environment with PACKAGE_NAME and PACKAGE_VERSION +# set as provided. These will also be added as -D defs in your Makefile +# so you can encode the package version directly into the source files. +#----------------------------------------------------------------------- + +AC_INIT([filemonitor], [0.6]) + +#-------------------------------------------------------------------- +# Call TEA_INIT as the first TEA_ macro to set up initial vars. +# This will define a ${TEA_PLATFORM} variable == "unix" or "windows" +# as well as PKG_LIB_FILE and PKG_STUB_LIB_FILE. +#-------------------------------------------------------------------- + +TEA_INIT([3.2]) + +AC_CONFIG_AUX_DIR(tclconfig) + +#-------------------------------------------------------------------- +# Load the tclConfig.sh file +#-------------------------------------------------------------------- + +TEA_PATH_TCLCONFIG +TEA_LOAD_TCLCONFIG + +#-------------------------------------------------------------------- +# Load the tkConfig.sh file if necessary (Tk extension) +#-------------------------------------------------------------------- + +#TEA_PATH_TKCONFIG +#TEA_LOAD_TKCONFIG + +#----------------------------------------------------------------------- +# Handle the --prefix=... option by defaulting to what Tcl gave. +# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER. +#----------------------------------------------------------------------- + +TEA_PREFIX + +#----------------------------------------------------------------------- +# Standard compiler checks. +# This sets up CC by using the CC env var, or looks for gcc otherwise. +# This also calls AC_PROG_CC, AC_PROG_INSTALL and a few others to create +# the basic setup necessary to compile executables. +#----------------------------------------------------------------------- + +TEA_SETUP_COMPILER + +#----------------------------------------------------------------------- +# __CHANGE__ +# Specify the C source files to compile in TEA_ADD_SOURCES, +# public headers that need to be installed in TEA_ADD_HEADERS, +# stub library C source files to compile in TEA_ADD_STUB_SOURCES, +# and runtime Tcl library files in TEA_ADD_TCL_SOURCES. +# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS +# and PKG_TCL_SOURCES. +#----------------------------------------------------------------------- + +TEA_ADD_SOURCES([tclFileMonitor.c]) +TEA_ADD_HEADERS([]) +TEA_ADD_INCLUDES([-I\"`${CYGPATH} ${srcdir}/generic`\"]) +TEA_ADD_LIBS([]) +TEA_ADD_CFLAGS([]) +TEA_ADD_STUB_SOURCES([]) +TEA_ADD_TCL_SOURCES([]) + +#-------------------------------------------------------------------- +# __CHANGE__ +# A few miscellaneous platform-specific items: +# +# Define a special symbol for Windows (BUILD_sample in this case) so +# that we create the export library with the dll. +# +# Windows creates a few extra files that need to be cleaned up. +# You can add more files to clean if your extension creates any extra +# files. +# +# TEA_ADD_* any platform specific compiler/build info here. +#-------------------------------------------------------------------- + +if test "${TEA_PLATFORM}" = "windows" ; then + AC_DEFINE(BUILD_sample) + CLEANFILES="pkgIndex.tcl *.lib *.dll *.exp *.ilk *.pdb vc*.pch" + TEA_ADD_SOURCES([win/tclWinFileMonitor.c]) + #TEA_ADD_INCLUDES([-I\"$(${CYGPATH} ${srcdir}/win)\"]) +else + CLEANFILES="pkgIndex.tcl" + TEA_ADD_SOURCES([unix/tclUnixFileMonitor.c unix/tclUnixFileMonitorKQ.c]) + #TEA_ADD_LIBS([-lsuperfly]) +fi +AC_SUBST(CLEANFILES) + +#-------------------------------------------------------------------- +# __CHANGE__ +# Choose which headers you need. Extension authors should try very +# hard to only rely on the Tcl public header files. Internal headers +# contain private data structures and are subject to change without +# notice. +# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG +#-------------------------------------------------------------------- + +TEA_PUBLIC_TCL_HEADERS +#TEA_PRIVATE_TCL_HEADERS + +#TEA_PUBLIC_TK_HEADERS +#TEA_PRIVATE_TK_HEADERS +#TEA_PATH_X + +#-------------------------------------------------------------------- +# Check whether --enable-threads or --disable-threads was given. +# This auto-enables if Tcl was compiled threaded. +#-------------------------------------------------------------------- + +TEA_ENABLE_THREADS + +#-------------------------------------------------------------------- +# The statement below defines a collection of symbols related to +# building as a shared library instead of a static library. +#-------------------------------------------------------------------- + +TEA_ENABLE_SHARED + +#-------------------------------------------------------------------- +# Package specific configuration. +#-------------------------------------------------------------------- + +TEA_ENABLE_KQUEUE +TEA_ENABLE_DNOTIFY + +#-------------------------------------------------------------------- +# This macro figures out what flags to use with the compiler/linker +# when building shared/static debug/optimized objects. This information +# can be taken from the tclConfig.sh file, but this figures it all out. +#-------------------------------------------------------------------- + +TEA_CONFIG_CFLAGS + +#-------------------------------------------------------------------- +# Set the default compiler switches based on the --enable-symbols option. +#-------------------------------------------------------------------- + +TEA_ENABLE_SYMBOLS + +#-------------------------------------------------------------------- +# Everyone should be linking against the Tcl stub library. If you +# can't for some reason, remove this definition. If you aren't using +# stubs, you also need to modify the SHLIB_LD_LIBS setting below to +# link against the non-stubbed Tcl library. Add Tk too if necessary. +#-------------------------------------------------------------------- + +AC_DEFINE(USE_TCL_STUBS) +#AC_DEFINE(USE_TK_STUBS) + +#-------------------------------------------------------------------- +# This macro generates a line to use when building a library. It +# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS, +# and TEA_LOAD_TCLCONFIG macros above. +#-------------------------------------------------------------------- + +TEA_MAKE_LIB + +#-------------------------------------------------------------------- +# Find tclsh so that we can run pkg_mkIndex to generate the pkgIndex.tcl +# file during the install process. Don't run the TCLSH_PROG through +# ${CYGPATH} because it's being used directly by make. +# Require that we use a tclsh shell version 8.2 or later since earlier +# versions have bugs in the pkg_mkIndex routine. +# Add WISH as well if this is a Tk extension. +#-------------------------------------------------------------------- + +TEA_PROG_TCLSH +#TEA_PROG_WISH + +#-------------------------------------------------------------------- +# Finally, substitute all of the various values into the Makefile. +# You may alternatively have a special pkgIndex.tcl.in or other files +# which require substituting th AC variables in. Include these here. +#-------------------------------------------------------------------- + +AC_OUTPUT([Makefile]) diff --git a/demos/Fmonitor.tcl b/demos/Fmonitor.tcl new file mode 100644 index 0000000..6ed780b --- /dev/null +++ b/demos/Fmonitor.tcl @@ -0,0 +1,89 @@ +# Fmonitor.tcl - Copyright (C) 2005 Pat Thoyts +# +# Filemonitor demo application. +# +# $Id$ + +package require Tk + +if {[file exists Debug/filemonitor06g.dll]} { + load Debug/filemonitor06g.dll Filemonitor +} + +package require Filemonitor 0.6 + +variable App +if {![info exists App]} { + array set App { + run 0 + path "" + monitors {} + } +} + +proc Log {msg} { + .t insert end "$msg\n" + .t see end +} + +proc MonitorEvent {event path args} { + .t insert end "$event $path $args\n" $event + .t see end +} + +proc MonitorBegin {} { + variable App + Log "Creating monitors for '$App(path)'" + foreach op {access modify create delete rename attrib size security} { + lappend App(monitors) [filemonitor create $op $App(path) \ + [list MonitorEvent $op $App(path)]] + } + .b1 configure -text "Stop Monitor" -command MonitorStop +} + +proc MonitorStop {} { + variable App + Log "Removing monitors" + foreach monitor $App(monitors) { + filemonitor delete $monitor + } + set App(monitors) {} + .b1 configure -text "Start Monitor" -command MonitorBegin +} + +proc Main {} { + variable App + wm title . "Filemonitor [package provide Filemonitor] Demo" + + frame .f1 -borderwidth 0 + label .l1 -text "Path to monitor" + entry .e1 -textvariable ::App(path) -width 60 + button .b1 -text {Start Monitor} -command MonitorBegin + button .b2 -text Exit -underline 1 -command [list set ::App(run) 1] + pack .l1 .e1 .b1 .b2 -in .f1 -side left + pack .b2 .b1 -in .f1 -side right + + frame .f2 -borderwidth 0 + text .t -background white -yscrollcommand [list .s set] + scrollbar .s -command [list .t yview] + pack .s -in .f2 -side right -fill y + pack .t -in .f2 -side left -fill both -expand 1 + + pack .f1 -side bottom -fill x -padx 1 -pady 2 + pack .f2 -side top -fill both -expand 1 -padx 1 -pady 2 + + tkwait variable ::App(run) + + # cleanup any leftovers (should be none if we stopped). + catch { + foreach monitor [filemonitor names] { + filemonitor delete $monitor + } + } +} + +if {!$tcl_interactive} { + Main + destroy . + exit 0 +} diff --git a/generic/tclFileMonitor.c b/generic/tclFileMonitor.c new file mode 100644 index 0000000..f47d513 --- /dev/null +++ b/generic/tclFileMonitor.c @@ -0,0 +1,400 @@ +/* tclFileMonitor.c - Copyright (C) 2003 Pat Thoyts + * + * This package provides a Tcl interface to the Win32 API functions that + * provide notifications when changes occur in the filesystem. These + * include notifications for files changing, being modified and having + * their attributes changed. Also for renaming or subdirectories + * being renamed. + * + * ------------------------------------------------------------------------- + * See the file "license" for information on usage and redistribution + * of this file, and for a DISCLAIMER OF ALL WARRANTIES. + * ------------------------------------------------------------------------- + */ + +#include "tclFileMonitor.h" +#include +#include + +/* + * The package prototypes + */ + +static Tcl_ObjCmdProc CmdProc; +static Tcl_ObjCmdProc DeleteProc; +static Tcl_ObjCmdProc InfoProc; +static Tcl_ObjCmdProc NamesProc; +static Tcl_InterpDeleteProc InterpDeleteProc; +static int TclDeleteMonitor(Tcl_Interp *interp, TclFileMonitor * monitorPtr); + +/* + *---------------------------------------------------------------------- + * + * Filemonitor_Init -- + * + * Package initialization. Create the interpreter specific data + * and attach it to the command. + * + * Returns: + * A standard tcl return code. + * + * Side effects: + * The package is initialized and the filemonitor command created. + * + *---------------------------------------------------------------------- + */ + +int +Filemonitor_Init(interp) + Tcl_Interp *interp; +{ + int r = TCL_OK; + FileMonitorPkg *pkgPtr; + +#ifdef USE_TCL_STUBS + if (Tcl_InitStubs(interp, "8.2", 0) == NULL) { + return TCL_ERROR; + } +#endif + + pkgPtr = (FileMonitorPkg *)ckalloc(sizeof(FileMonitorPkg)); + memset(pkgPtr, 0, sizeof(FileMonitorPkg)); + + r = TclpFilemonitorInit(interp, pkgPtr); + if (r == TCL_OK) { + Tcl_CreateObjCommand(interp, "filemonitor", CmdProc, + (ClientData) pkgPtr, (Tcl_CmdDeleteProc *) NULL); + + Tcl_CallWhenDeleted(interp, InterpDeleteProc, (ClientData) pkgPtr); + + Tcl_PkgProvide(interp, "Filemonitor", PACKAGE_VERSION); + } + + return r; +} + +/* + *---------------------------------------------------------------------- + * + * InterpDeleteProc -- + * + * Clean up the interpreter specific data on interp exit. + * + * Results: + * None. + * + * Side effects: + * Any outstanding monitors are deleted and allocated storage + * is freed. + * + *---------------------------------------------------------------------- + */ + +static void +InterpDeleteProc(ClientData clientData, Tcl_Interp *interp) +{ + FileMonitorPkg *pkgPtr = (FileMonitorPkg *)clientData; + TclFileMonitor *tmpPtr, *delPtr; + + /* + * release the tree of filemonitor structs + */ + + tmpPtr = pkgPtr->headPtr; + while (tmpPtr != NULL) { + delPtr = tmpPtr; + tmpPtr = delPtr->nextPtr; + TclDeleteMonitor(interp, delPtr); + } + + ckfree((char *)pkgPtr); +} + +/* + * ---------------------------------------------------------------------- + * + * Tcl_DeleteMonitor -- + * + * Here we free any generic resources in the Monitor data and then + * pass it to the platform specific function which will release any + * platform resources and free the allocated storage. + * + * ---------------------------------------------------------------------- + */ + +static int +TclDeleteMonitor(interp, monitorPtr) + Tcl_Interp *interp; + TclFileMonitor *monitorPtr; +{ + Tcl_DecrRefCount(monitorPtr->cmdPtr); + return TclpDeleteMonitor(interp, monitorPtr); +} + +/* + * ---------------------------------------------------------------------- + * + * CmdProc -- + * + * Implementation of the filemonitor command. + * filemonitor create filename type ?-recurse? script + * filemonitor delete token + * filemonitor info token + * filemonitor names + * + * Results: + * A standard Tcl result code. + * + * Side Effects: + * + * + * ---------------------------------------------------------------------- + */ + +int +CmdProc(clientData, interp, objc, objv) + ClientData clientData; + Tcl_Interp *interp; + int objc; + Tcl_Obj *CONST84 objv[]; +{ + enum { CMD_CREATE, CMD_DELETE, CMD_INFO, CMD_NAMES }; + static CONST char *cmds[] = { + "create", "delete", "info", "names", NULL + }; + int r, index; + + + if (objc < 2) { + Tcl_WrongNumArgs(interp, 1, objv, "command ?options?"); + return TCL_ERROR; + } + + r = Tcl_GetIndexFromObj(interp, objv[1], cmds, "command", 0, &index); + if (r == TCL_OK) { + switch (index) { + case CMD_CREATE: + r = TclpFileMonitorCreateProc(clientData, interp, objc, objv); + break; + + case CMD_DELETE: + r = DeleteProc(clientData, interp, objc, objv); + break; + + case CMD_INFO: + r = InfoProc(clientData, interp, objc, objv); + break; + + case CMD_NAMES: + r = NamesProc(clientData, interp, objc, objv); + break; + } + } + + return r; +} + +/* + * ---------------------------------------------------------------------- + * + * DeleteProc -- + * + * Handle the 'filemonitor delete' subcommand. + * + * Results: + * A standard Tcl result code. + * + * Side Effects: + * The named monitor is deleted and it's resources freed. + * + * ---------------------------------------------------------------------- + */ + +static int +DeleteProc(clientData, interp, objc, objv) + ClientData clientData; + Tcl_Interp *interp; + int objc; + Tcl_Obj *CONST84 objv[]; +{ + FileMonitorPkg *pkgPtr = (FileMonitorPkg *)clientData; + TclFileMonitor *tmpPtr, *prevPtr; + CONST char *name; + + if (objc < 3) { + Tcl_WrongNumArgs(interp, 2, objv, "name"); + return TCL_ERROR; + } + + name = Tcl_GetString(objv[2]); + + /* + * Find the monitor data + */ + + for (prevPtr = tmpPtr = pkgPtr->headPtr; + tmpPtr != NULL; + prevPtr = tmpPtr, tmpPtr = tmpPtr->nextPtr) { + if (strcmp(tmpPtr->name, name) == 0) + break; + } + + if (tmpPtr == NULL) { + Tcl_ResetResult(interp); + Tcl_AppendStringsToObj(Tcl_GetObjResult(interp), + "can not file monitor named \"", name, "\"", (char *)NULL); + return TCL_ERROR; + } + + if (prevPtr != NULL) + prevPtr->nextPtr = tmpPtr->nextPtr; + + TclDeleteMonitor(interp, tmpPtr); + + return TCL_OK; +} + +/* + * ---------------------------------------------------------------------- + * + * InfoProc -- + * + * + * Results: + * A standard Tcl result code. + * + * Side Effects: + * + * + * ---------------------------------------------------------------------- + */ + +static int +InfoProc(clientData, interp, objc, objv) + ClientData clientData; + Tcl_Interp *interp; + int objc; + Tcl_Obj *CONST84 objv[]; +{ + /* FileMonitorPkg *pkgPtr = (FileMonitorPkg *)clientData; */ + + Tcl_SetStringObj(Tcl_GetObjResult(interp), + "not implemented", -1); + return TCL_ERROR; +} + +/* + * ---------------------------------------------------------------------- + * + * NamesProc -- + * + * Fetch a list of all outstanding monitors. + * + * Results: + * A standard Tcl result code. + * + * Side Effects: + * A list of monitor names is place in the interp result. + * + * ---------------------------------------------------------------------- + */ + +static int +NamesProc(clientData, interp, objc, objv) + ClientData clientData; + Tcl_Interp *interp; + int objc; + Tcl_Obj *CONST84 objv[]; +{ + FileMonitorPkg *pkgPtr = (FileMonitorPkg *)clientData; + TclFileMonitor *tmpPtr; + Tcl_Obj *resultPtr; + + resultPtr = Tcl_NewListObj(0, NULL); + + for (tmpPtr = pkgPtr->headPtr; tmpPtr != NULL; tmpPtr = tmpPtr->nextPtr) { + Tcl_ListObjAppendElement(interp, resultPtr, + Tcl_NewStringObj(tmpPtr->name, -1)); + } + + Tcl_SetObjResult(interp, resultPtr); + return TCL_OK; +} + +/* + * ---------------------------------------------------------------------- + * + * BackgroundEvalObjEx -- + * + * Evaluate a command while ensuring that we do not affect the + * interpreters state. This is important when evaluating script + * during background tasks. + * + * Results: + * A standard Tcl result code. + * + * Side Effects: + * The interpreters variables and code may be modified by the script + * but the result will not be modified. + * + * ---------------------------------------------------------------------- + */ + +int +BackgroundEvalObjEx(Tcl_Interp *interp, Tcl_Obj *cmdPtr, int flags) +{ + Tcl_DString errorInfo, errorCode; + Tcl_SavedResult state; + int r = TCL_OK; + + Tcl_DStringInit(&errorInfo); + Tcl_DStringInit(&errorCode); + + /* + * Record the state of the interpreter + */ + + Tcl_SaveResult(interp, &state); + Tcl_DStringAppend(&errorInfo, + Tcl_GetVar(interp, "errorInfo", TCL_GLOBAL_ONLY), -1); + Tcl_DStringAppend(&errorCode, + Tcl_GetVar(interp, "errorCode", TCL_GLOBAL_ONLY), -1); + + /* + * Evaluate the command and handle any error. + */ + + r = Tcl_EvalObjEx(interp, cmdPtr, flags); + if (r == TCL_ERROR) { + Tcl_AddErrorInfo(interp, + "\n (filemonitor notification handler)"); + Tcl_BackgroundError(interp); + } + + /* + * Restore the state of the interpreter + */ + + Tcl_SetVar(interp, "errorInfo", + Tcl_DStringValue(&errorInfo), TCL_GLOBAL_ONLY); + Tcl_SetVar(interp, "errorCode", + Tcl_DStringValue(&errorCode), TCL_GLOBAL_ONLY); + Tcl_RestoreResult(interp, &state); + + /* + * Clean up references. + */ + + Tcl_DStringFree(&errorInfo); + Tcl_DStringFree(&errorCode); + + return r; +} + +/* + * Local variables: + * mode: c + * c-indentation-style: tcltk + * tab-width: 8 + * End: + */ diff --git a/generic/tclFileMonitor.h b/generic/tclFileMonitor.h new file mode 100644 index 0000000..ff9c809 --- /dev/null +++ b/generic/tclFileMonitor.h @@ -0,0 +1,71 @@ +/* filemonitor.h - Copyright (C) 2003 Pat Thoyts + * + * This package provides a Tcl interface to the Win32 API functions that + * provide notifications when changes occur in the filesystem. These + * include notifications for files changing, being modified and having + * their attributes changed. Also for renaming or subdirectories + * being renamed. + * + * ------------------------------------------------------------------------- + * See the file "license" for information on usage and redistribution + * of this file, and for a DISCLAIMER OF ALL WARRANTIES. + * ------------------------------------------------------------------------- + */ + +#include + +#ifdef BUILD_filemonitor +#undef TCL_STORAGE_CLASS +#define TCL_STORAGE_CLASS DLLEXPORT +#endif + +#ifndef VERSION +#define VERSION "0.6" +#endif + +/* Tcl 8.4 CONST support */ +#ifndef CONST84 +#define CONST84 +#endif + +/* + * The data structure used to hold the state of a monitor. + * Monitors are named for use with the delete and info commands. + */ + +typedef struct TclFileMonitor { + char name[TCL_INTEGER_SPACE + 7]; + Tcl_Interp *interp; /* the interpreter to run the script */ + Tcl_Obj *cmdPtr; /* the script to run when signalled */ + struct TclFileMonitor *nextPtr; /* the next monitor item */ +} TclFileMonitor; + +/* + * The Tcl event queued when a monitor is signalled. The interp + * and cmdPtr items are copied from the monitor data structure. + */ + +typedef struct FileMonitorEvent { + Tcl_Event header; + Tcl_Interp *interp; + Tcl_Obj *cmdPtr; +} FileMonitorEvent; + +/* + * The package structure maintains interpreter specific data. + * This includes a counter used to generate interp unique names for the + * monitors, a list of all the created monitors and a general purpose value + * that may be used by the platform specific implementation. + */ + +typedef struct FileMonitorPkg { + unsigned long id; + ClientData clientData; + TclFileMonitor *headPtr; +} FileMonitorPkg; + +EXTERN int Filemonitor_Init(Tcl_Interp *interp); +int TclpFilemonitorInit(Tcl_Interp *interp, FileMonitorPkg *pkgPtr); +Tcl_ObjCmdProc TclpFileMonitorCreateProc; +int TclpDeleteMonitor(Tcl_Interp *interp, TclFileMonitor *monitorPtr); +int BackgroundEvalObjEx(Tcl_Interp *interp, Tcl_Obj *cmdPtr, int flags); diff --git a/license.terms b/license.terms new file mode 100644 index 0000000..7e65585 --- /dev/null +++ b/license.terms @@ -0,0 +1,38 @@ +This software is copyrighted by Patrick Thoyts. +The following terms apply to all files associated with the software unless +explicitly disclaimed in individual files. + +The authors hereby grant permission to use, copy, modify, distribute, +and license this software and its documentation for any purpose, provided +that existing copyright notices are retained in all copies and that this +notice is included verbatim in any distributions. No written agreement, +license, or royalty fee is required for any of the authorized uses. +Modifications to this software may be copyrighted by their authors +and need not follow the licensing terms described here, provided that +the new terms are clearly indicated on the first page of each file where +they apply. + +IN NO EVENT SHALL THE AUTHORS OR DISTRIBUTORS BE LIABLE TO ANY PARTY +FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES +ARISING OUT OF THE USE OF THIS SOFTWARE, ITS DOCUMENTATION, OR ANY +DERIVATIVES THEREOF, EVEN IF THE AUTHORS HAVE BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. + +THE AUTHORS AND DISTRIBUTORS SPECIFICALLY DISCLAIM ANY WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. THIS SOFTWARE +IS PROVIDED ON AN "AS IS" BASIS, AND THE AUTHORS AND DISTRIBUTORS HAVE +NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR +MODIFICATIONS. + +GOVERNMENT USE: If you are acquiring this software on behalf of the +U.S. government, the Government shall have only "Restricted Rights" +in the software and related documentation as defined in the Federal +Acquisition Regulations (FARs) in Clause 52.227.19 (c) (2). If you +are acquiring the software on behalf of the Department of Defense, the +software shall be classified as "Commercial Computer Software" and the +Government shall have only "Restricted Rights" as defined in Clause +252.227-7013 (c) (1) of DFARs. Notwithstanding the foregoing, the +authors grant the U.S. Government and others acting in its behalf +permission to use and distribute the software in accordance with the +terms specified in this license. diff --git a/tclconfig/ChangeLog b/tclconfig/ChangeLog new file mode 100644 index 0000000..16b7e21 --- /dev/null +++ b/tclconfig/ChangeLog @@ -0,0 +1,412 @@ +2005-06-04 Daniel Steffen + + * tcl.m4 (TEA_PATH_X): for TEA_WINDOWINGSYSTEM == aqua, check if xlib + compat headers are available in tkheaders location, otherwise add xlib + sourcedir to TK_XINCLUDES. + +2005-04-25 Daniel Steffen + + * tcl.m4: added AC_DEFINE* descriptions (from core tcl.m4) to allow + use with autoheader. + (Darwin): added configure checks for recently added linker flags + -single_module and -search_paths_first to allow building with older + tools (and on Mac OS X 10.1), use -single_module in SHLIB_LD. + (TEA_MISSING_POSIX_HEADERS): added caching of dirent.h check. + (TEA_BUGGY_STRTOD): added caching (sync with core tcl.m4). + +2005-03-24 Jeff Hobbs + + * tcl.m4 (TEA_TCL_64BIT_FLAGS): use Tcl header defaults for wide + int type only on Windows when __int64 is detected as valid. + +2005-03-24 Don Porter + + * README.txt: Update reference to "SC_* macros" to "TEA_* macros". + * tcl.m4: Incorporated recent improvements in SC_PATH_TCLCONFIG + and SC_PATH_TKCONFIG into TEA_PATH_TCLCONFIG and TEA_PATH_TKCONFIG. + Corrected search path in TEA_PATH_CONFIG and added + AC_SUBST($1_BIN_DIR) to TEA_LOAD_CONFIG so that packages that load + the configuration of another package can know where they loaded + it from. + +2005-03-18 Jeff Hobbs + + * tcl.m4 (TEA_CONFIG_CFLAGS): correct 2005-03-17 change to have + variant LD_SEARCH_FLAGS for gcc and cc builds. + + * tcl.m4 (TEA_PROG_TCLSH, TEA_PROG_WISH): correct x-compile check. + +2005-03-17 Jeff Hobbs + + * tcl.m4: Correct gcc build and HP-UX-11. + +2005-02-08 Jeff Hobbs + + * tcl.m4 (TEA_ADD_LIBS): don't touch lib args starting with -. + (TEA_CONFIG_CFLAGS): only define _DLL for CE in shared build. + (TEA_MAKE_LIB): set RANLIB* to : on Windows (it's not needed). + +2005-02-01 Jeff Hobbs + + * tcl.m4: redo of 2005-01-27 changes to correctly handle paths + with spaces. Win/CE and Win/64 builds now require a prebuilt + tclsh to handle conversion to short pathnames. This is done in + the new TEA_PATH_NOSPACE macro. For Win/CE|64, make CC just the + compiler and move the necessary includes to CFLAGS. + (TEA_CONFIG_CFLAGS): Add Solaris 64-bit gcc build support. + (TEA_PROG_TCLSH, TEA_PROG_WISH): Allow TCLSH_PROG and WISH_PROG to + be set in the env and prevent resetting. + (TEA_ADD_LIBS): On Windows using GCC (mingw), convert foo.lib + args to -lfoo, for use with mingw. + *** POTENTIAL INCOMPATABILITY *** + (TEA_CONFIG_CFLAGS): Fix AIX gcc builds to work out-of-box. + Bumped TEA to 3.2. + +2005-01-27 Jeff Hobbs + + * tcl.m4: remove cygpath calls to support msys. + Update base CE build assumption to "420,ARMV4,ARM,Pocket PC 2003". + Make STLIB_LD use $LINKBIN -lib. + +2005-01-25 Daniel Steffen + + * tcl.m4 (Darwin): fixed bug with static build linking to dynamic + library in /usr/lib etc instead of linking to static library earlier + in search path. [Tcl Bug 956908] + Removed obsolete references to Rhapsody. + +2004-12-29 Jeff Hobbs + + * tcl.m4: Updates for VC7 compatibility, fixing CFLAGS and LDFLAGS + options, using better default -O levels. [Bug 1092952, 1091967] + +2004-12-29 Joe English + + * tcl.m4: Do not use ${DBGX} suffix when building + shared libraries [patch #1081595, TIP #34] + +2004-09-07 Jeff Hobbs + + * tcl.m4 (TEA_CONFIG_CFLAGS): support eVC4 Win/CE builds + +2004-08-10 Jeff Hobbs + + * tcl.m4 (TEA_INIT, TEA_PREFIX): update handling of exec_prefix to + work around subdir configures since autoconf only propagates the + prefix (not exec_prefix). + +2004-07-23 Daniel Steffen + + * tcl.m4 (TEA_CONFIG_CFLAGS): Darwin section: brought inline with + Tcl 8.5 HEAD config, removed core specific & obsolete settings. + +2004-07-22 Jeff Hobbs + + * tcl.m4 (TEA_PATH_X): check in TK_DEFS for MAC_OSX_TK to see if + we are compiling on Aqua. Add TEA_WINDOWINGSYSTEM var that + reflects 'tk windowingsystem' value. + +2004-07-16 Jeff Hobbs + + * tcl.m4 (TEA_ENABLE_THREADS): force a threaded build when + building against a threaded core. + (CFLAGS_WARNING): Remove -Wconversion for gcc builds + (TEA_CONFIG_CFLAGS): Reorder configure.in for better 64-bit build + configuration, replacing EXTRA_CFLAGS with CFLAGS. [Bug #874058] + Update to latest Tcl 8.5 head config settings. + Call this TEA version 3.1. + +2004-04-29 Jeff Hobbs + + * tcl.m4 (TEA_TCL_64BIT_FLAGS): replace AC_TRY_RUN test with + AC_TRY_COMPILE for the long vs. long long check. (kenny) + +2004-04-26 Jeff Hobbs + + * tcl.m4 (TEA_TCL_64BIT_FLAGS): update against core tcl.m4 to + define TCL_WIDE_INT_IS_LONG if 'using long'. + +2004-03-19 Jeff Hobbs + + * tcl.m4: correct Windows builds getting LDFLAGS info in MAKE_LIB + +2004-02-11 Jeff Hobbs + + * tcl.m4: correct TCL_INCLUDES for private headers on Windows - it + doesn't need the eval. + +2004-02-10 Jeff Hobbs + + * tcl.m4: don't require TK_INCLUDES and TCL_INCLUDES to have the + DIR_NATIVE vars defined when using private headers on unix. + Allow $... to TEA_ADD_SOURCES for constructs like + TEA_ADD_SOURCES([\$(WIN_OBJECTS)]), that allow the developer to + place more in the Makefile.in. + tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and + CHECK on limits.h + +2003-12-10 Jeff Hobbs + + * Makefile.in: added TEA_ADD_LIBS, TEA_ADD_INCLUDES and + * configure: TEA_ADD_CFLAGS to configurable parameters with + * configure.in: PKG_* equivs in the Makefile. This allows the + * tclconfig/tcl.m4: user to worry less about actual magic VAR names. + Corrected Makefile.in to note that TEA_ADD_TCL_SOURCES requires + exact file names. + +2003-12-09 Jeff Hobbs + + * tcl.m4: updated OpenBSD support based on [Patch #775246] (cassoff) + +2003-12-05 Jeff Hobbs + + * configure: + * configure.in: + * Makefile.in (VPATH): readd $(srcdir) to front of VPATH as the + first part of VPATH can get chopped off. + Change .c.$(OBJEXT) rule to .c.@OBJEXT@ to support more makes. + * tclconfig/tcl.m4: add TEA_ADD_STUB_SOURCES to support libstub + generation and TEA_ADD_TCL_SOURCES to replace RUNTIME_SOURCES as + the way the user specifies library files. + +2003-12-03 Jeff Hobbs + + * configure: Update of TEA spec to (hopefully) simplify + * configure.in: some aspects of TEA by making use of more + * Makefile.in: AC 2.5x features. Use PACKAGE_NAME (instead + * generic/tclsample.c: of PACKAGE) and PACKAGE_VERSION (instead of + * tclconfig/tcl.m4: VERSION) arguments to AC_INIT as the TEA + package name and version. + Provide a version argument to TEA_INIT - starting with 3.0. + Drop all use of interior shell substs that older makefiles didn't + like. Use PKG_* naming convention instead. + Move specification of source files and public headers into + configure.in with TEA_ADD_SOURCES and TEA_ADD_HEADERS. These will + be munged during ./configure into the right obj file names (no + $(SOURCES:.c=.obj) needed). + There is almost nothing that should be touched in Makefile.in now + for the developer. May want to add a TEA_ADD_TCL_SOURCES for the + RUNTIME_SOURCES that remains. + Use SHLID_LD_FLAGS (instead of SHLID_LDFLAGS) as Tcl does. + Only specify the user requested LDFLAGS/CFLAGS in the Makefile, + don't mention the _OPTIMIZE/_DEBUG variants. + +2003-10-15 Jeff Hobbs + + * tcl.m4: create a TEA_SETUP_COMPILER_CC the precedes the + TEA_SETUP_COMPILER macro. They are split so the check for CC + occurs before any use of CC. Also add AC_PROG_CPP to the compiler + checks. + +2003-10-06 Jeff Hobbs + + * tcl.m4: Updated for autoconf 2.5x prereq. + Where TCL_WIDE_INT_TYPE would be __int64, defer to the code checks + in tcl.h, which also handles TCL_LL_MODIFIER* properly. + +2003-04-22 Jeff Hobbs + + * tcl.m4: correct default setting of ARCH for WinCE builds. + Correct \ escaping for CE sed macros. + +2003-04-10 Jeff Hobbs + + * tcl.m4: replace $(syscal) construct with older `syscall` for + systems where sh != bash. + +2003-04-09 Jeff Hobbs + + * tcl.m4 (TEA_WITH_CELIB): add --enable-wince and --with-celib + options for Windows/CE compilation support. Requires the + Microsoft eMbedded SDK and Keuchel's celib emulation layer. + +2003-02-18 Jeff Hobbs + + * tcl.m4 (TEA_ENABLE_THREADS): Make sure -lpthread gets passed on + the link line when checking for the pthread_attr_setstacksize + symbol. (dejong) + + * tcl.m4 (TEA_SETUP_COMPILER): added default calls to + TEA_TCL_EARLY_FLAGS, TEA_TCL_64BIT_FLAGS, + TEA_MISSING_POSIX_HEADERS and TEA_BUGGY_STRTOD. + +2003-02-14 Jeff Hobbs + + * tcl.m4: correct HP-UX ia64 --enable-64bit build flags + +2003-01-29 Jeff Hobbs + + * tcl.m4: check $prefix/lib as well as $exec_prefix/lib when + looking for tcl|tkConfig.sh, as this check is done before we would + set exec_prefix when the user does not define it. + +2003-01-21 Mo DeJong + + * tcl.m4 (TEA_CONFIG_CFLAGS): Fix build support + for mingw, the previous implementation would + use VC++ when compiling with mingw gcc. Don't + pass -fPIC since gcc always compiles pic code + under win32. Change some hard coded cases + of gcc to ${CC}. + +2002-10-15 Jeff Hobbs + + * tcl.m4: move the CFLAGS definition from TEA_ENABLE_SHARED to + TEA_MAKE_LIB because setting too early confuses other AC_* macros. + Correct the HP-11 SHLIB_LD_LIBS setting. + + * tcl.m4: add the CFLAGS definition into TEA_ENABLE_SHARED and + make it pick up the env CFLAGS at configure time. + +2002-10-09 Jeff Hobbs + + * tcl.m4: add --enable-symbols=mem option to enable TCL_MEM_DEBUG. + Improved AIX 64-bit build support, allow it on AIX-4 as well. + Enable 64-bit HP-11 compilation with gcc. + Enable 64-bit IRIX64-6 cc build support. + Correct FreeBSD thread library linkage. + Add OSF1 static build support. + Improve SunOS-5 shared build SHLIB_LD macro. + +2002-07-20 Zoran Vasiljevic + + * tcl.m4: Added MINGW32 to list of systems checked for Windows build. + Also, fixes some indentation issues with "--with-XXX" options. + +2002-04-23 Jeff Hobbs + + * tcl.m4 (TEA_ENABLE_THREADS): added USE_THREAD_ALLOC define to + use new threaded allocatory by default on Unix for Tcl 8.4. + (TEA_CONFIG_CFLAGS): corrected LD_SEARCH_FLAGS for FreeBSD-3+. + +2002-04-22 Jeff Hobbs + + * tcl.m4 (TEA_SETUP_COMPILER): removed call to AC_CYGWIN so that + we can use autoconf 2.5x as well as 2.13. This prevents us from + being able to warn against the use of cygwin gcc at configure + time, but allows autoconf 2.5x, which is what is shipped with most + newer systems. + +2002-04-11 Jeff Hobbs + + * tcl.m4: Enabled COFF as well as CV style debug info with + --enable-symbols to allow Dr. Watson users to see function info. + More info on debugging levels can be obtained at: + http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp + +2002-04-03 Jeff Hobbs + + * tcl.m4: change all SC_* macros to TEA_*. The SC_ was for + Scriptics, which is no more. TEA represents a better, independent + prefix that won't need changing. + Added preliminary mingw gcc support. [Patch #538772] + Added TEA_PREFIX macro that handles defaulting the prefix and + exec_prefix vars to those used by Tcl if none were specified. + Added TEA_SETUP_COMPILER macro that encompasses the AC_PROG_CC + check and several other basic AC_PROG checks needed for making + executables. This greatly simplifies user's configure.in files. + Collapsed AIX-5 defines into AIX-* with extra checks for doing the + ELF stuff on AIX-5-ia64. + Updated TEA_ENABLE_THREADS to take an optional arg to allow + switching it on by default (for Thread) and add sanity checking to + warn the user if configuring threads incompatibly. + +2002-03-29 Jeff Hobbs + + * tcl.m4: made sure that SHLIB_LDFLAGS was set to LDFLAGS_DEFAULT. + Removed --enable-64bit support for AIX-4 because it wasn't correct. + Added -MT or -MD Windows linker switches to properly support + symbols-enabled builds. + +2002-03-28 Jeff Hobbs + + * tcl.m4: called AC_MSG_ERROR when SC_TEA_INIT wasn't called first + instead of calling it as that inlines it each time in shell code. + Changed Windows CFLAGS_OPTIMIZE to use -O2 instead of -Oti. + Noted TCL_LIB_VERSIONS_OK=nodots for Windows builds. + A few changes to support itcl (and perhaps others): + Added support for making your own stub libraries to SC_MAKE_LIB. + New SC_PATH_CONFIG and SC_LOAD_CONFIG that take a package name arg + and find that ${pkg}Config.sh file. itk uses this for itcl. + +2002-03-27 Jeff Hobbs + + * tcl.m4: made SC_LOAD_TKCONFIG recognize when working with a Tk + build dir setup. + Added EXTRA_CFLAGS and SHLIB_LD_LIBS substs to SC_CONFIG_CFLAGS. + Added XLIBSW onto LIBS when it is defined. + Remove TCL_LIBS from MAKE_LIB and correctly use SHLIB_LD_LIBS + instead to not rely as much on tclConfig.sh cached info. + Add TK_BIN_DIR to paths to find wish in SC_PROG_WISH. + These move towards making TEA much more independent of *Config.sh. + +2002-03-19 Jeff Hobbs + + * tcl.m4: corrected forgotten (UN)SHARED_LIB_SUFFIX and + SHLIB_SUFFIX defines for Win. + (SC_PATH_X): made this only do the check on unix platforms. + +2002-03-12 Jeff Hobbs + + * README.txt: updated to reflect fewer files + +2002-03-06 Jeff Hobbs + + * config.guess (removed): + * config.sub (removed): removed unnecessary files + + * installFile.tcl (removed): + * mkinstalldirs (removed): these aren't really necessary for + making TEA work + + * tcl.m4 (SC_PUBLIC_TCL_HEADERS, SC_PUBLIC_TK_HEADERS): don't + check /usr(/local)/include for includes on Windows when not using + gcc + +2002-03-05 Jeff Hobbs + + * tcl.m4: added warnings on Windows, removed RELPATH define and + added TCL_LIBS to MAKE_LIB macro. + + This import represents 2.0.0, or a new start at attempting to + make TEA much easier for C extension developers. + + **** moved from tclpro project to core tcl project, **** + **** renamed to 'tclconfig' **** + +2001-03-15 Karl Lehenbauer + + * installFile.tcl: Added updating of the modification time of + the target file whether we overwrote it or decided that it + hadn't changed. This was necessary for us to be able to + determine whether or not a module install touched the file. + +2001-03-08 Karl Lehenbauer + + * installFile.tcl: Added support for converting new-style (1.1+) + Cygnus drive paths to Tcl-style. + +2001-01-15 + + * tcl.m4: Added FreeBSD clause. + +2001-01-03 + + * tcl.m4: Fixed typo in SC_LIB_SPEC where it is checking + for exec-prefix. + +2000-12-01 + + * tcl.m4: Concatenated most of the Ajuba acsite.m4 file + so we don't need to modify the autoconf installation. + * config.guess: + * config.sub: + * installFile.tcl: + Added files from the itcl config subdirectory, + which should go away. + +2000-7-29 + + * Fixed the use of TCL_SRC_DIR and TK_SRC_DIR within + TCL_PRIVATE_INCLUDES and TK_PRIVATE_INCLUDES to match their recent + change from $(srcdir) to $(srcdir)/.. diff --git a/tclconfig/README.txt b/tclconfig/README.txt new file mode 100644 index 0000000..59b5a3e --- /dev/null +++ b/tclconfig/README.txt @@ -0,0 +1,26 @@ +These files comprise the basic building blocks for a Tcl Extension +Architecture (TEA) extension. For more information on TEA see: + + http://www.tcl.tk/doc/tea/ + +This package is part of the Tcl project at SourceForge, and latest +sources should be available there: + + http://tcl.sourceforge.net/ + +This package is a freely available open source package. You can do +virtually anything you like with it, such as modifying it, redistributing +it, and selling it either in whole or in part. + +CONTENTS +======== +The following is a short description of the files you will find in +the sample extension. + +README.txt This file + +install-sh Program used for copying binaries and script files + to their install locations. + +tcl.m4 Collection of Tcl autoconf macros. Included by a package's + aclocal.m4 to define TEA_* macros. diff --git a/tclconfig/install-sh b/tclconfig/install-sh new file mode 100644 index 0000000..0ff4b6a --- /dev/null +++ b/tclconfig/install-sh @@ -0,0 +1,119 @@ +#!/bin/sh + +# +# install - install a program, script, or datafile +# This comes from X11R5; it is not part of GNU. +# +# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $ +# +# This script is compatible with the BSD install script, but was written +# from scratch. +# + + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" + +instcmd="$mvprog" +chmodcmd="" +chowncmd="" +chgrpcmd="" +stripcmd="" +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src="" +dst="" + +while [ x"$1" != x ]; do + case $1 in + -c) instcmd="$cpprog" + shift + continue;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + -s) stripcmd="$stripprog" + shift + continue;; + + *) if [ x"$src" = x ] + then + src=$1 + else + dst=$1 + fi + shift + continue;; + esac +done + +if [ x"$src" = x ] +then + echo "install: no input file specified" + exit 1 +fi + +if [ x"$dst" = x ] +then + echo "install: no destination specified" + exit 1 +fi + + +# If destination is a directory, append the input filename; if your system +# does not like double slashes in filenames, you may need to add some logic + +if [ -d $dst ] +then + dst="$dst"/`basename $src` +fi + +# Make a temp file name in the proper directory. + +dstdir=`dirname $dst` +dsttmp=$dstdir/#inst.$$# + +# Move or copy the file name to the temp name + +$doit $instcmd $src $dsttmp + +# and set any options; do chmod last to preserve setuid bits + +if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; fi +if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; fi +if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; fi +if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; fi + +# Now rename the file to the real destination. + +$doit $rmcmd $dst +$doit $mvcmd $dsttmp $dst + + +exit 0 diff --git a/tclconfig/tcl.m4 b/tclconfig/tcl.m4 new file mode 100644 index 0000000..e1287fd --- /dev/null +++ b/tclconfig/tcl.m4 @@ -0,0 +1,3858 @@ +# tcl.m4 -- +# +# This file provides a set of autoconf macros to help TEA-enable +# a Tcl extension. +# +# Copyright (c) 1999-2000 Ajuba Solutions. +# Copyright (c) 2002-2005 ActiveState Corporation. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# RCS: @(#) $Id$ + +AC_PREREQ(2.50) + +#------------------------------------------------------------------------ +# TEA_PATH_TCLCONFIG -- +# +# Locate the tclConfig.sh file and perform a sanity check on +# the Tcl compile flags +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-tcl=... +# +# Defines the following vars: +# TCL_BIN_DIR Full path to the directory containing +# the tclConfig.sh file +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PATH_TCLCONFIG, [ + dnl Make sure we are initialized + AC_REQUIRE([TEA_INIT]) + # + # Ok, lets find the tcl configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tcl + # + + if test x"${no_tcl}" = x ; then + # we reset no_tcl in case something fails here + no_tcl=true + AC_ARG_WITH(tcl, [ --with-tcl directory containing tcl configuration (tclConfig.sh)], with_tclconfig=${withval}) + AC_MSG_CHECKING([for Tcl configuration]) + AC_CACHE_VAL(ac_cv_c_tclconfig,[ + + # First check to see if --with-tcl was specified. + if test x"${with_tclconfig}" != x ; then + case ${with_tclconfig} in + */tclConfig.sh ) + if test -f ${with_tclconfig}; then + AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself]) + with_tclconfig=`echo ${with_tclconfig} | sed 's!/tclConfig\.sh$!!'` + fi ;; + esac + if test -f "${with_tclconfig}/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)` + else + AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh]) + fi + fi + + # then check for a private Tcl installation + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ../tcl \ + `ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../tcl \ + `ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../../tcl \ + `ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd $i/unix; pwd)` + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + ; do + if test -f "$i/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd $i; pwd)` + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ${srcdir}/../tcl \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd $i/unix; pwd)` + break + fi + done + fi + ]) + + if test x"${ac_cv_c_tclconfig}" = x ; then + TCL_BIN_DIR="# no Tcl configs found" + AC_MSG_WARN("Cannot find Tcl configuration definitions") + exit 0 + else + no_tcl= + TCL_BIN_DIR=${ac_cv_c_tclconfig} + AC_MSG_RESULT([found $TCL_BIN_DIR/tclConfig.sh]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_PATH_TKCONFIG -- +# +# Locate the tkConfig.sh file +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-tk=... +# +# Defines the following vars: +# TK_BIN_DIR Full path to the directory containing +# the tkConfig.sh file +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PATH_TKCONFIG, [ + # + # Ok, lets find the tk configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tk + # + + if test x"${no_tk}" = x ; then + # we reset no_tk in case something fails here + no_tk=true + AC_ARG_WITH(tk, [ --with-tk directory containing tk configuration (tkConfig.sh)], with_tkconfig=${withval}) + AC_MSG_CHECKING([for Tk configuration]) + AC_CACHE_VAL(ac_cv_c_tkconfig,[ + + # First check to see if --with-tkconfig was specified. + if test x"${with_tkconfig}" != x ; then + case ${with_tkconfig} in + */tkConfig.sh ) + if test -f ${with_tkconfig}; then + AC_MSG_WARN([--with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself]) + with_tkconfig=`echo ${with_tkconfig} | sed 's!/tkConfig\.sh$!!'` + fi ;; + esac + if test -f "${with_tkconfig}/tkConfig.sh" ; then + ac_cv_c_tkconfig=`(cd ${with_tkconfig}; pwd)` + else + AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh]) + fi + fi + + # then check for a private Tk library + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ../tk \ + `ls -dr ../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../tk \ + `ls -dr ../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../../tk \ + `ls -dr ../../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig=`(cd $i/unix; pwd)` + break + fi + done + fi + # check in a few common install locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + ; do + if test -f "$i/tkConfig.sh" ; then + ac_cv_c_tkconfig=`(cd $i; pwd)` + break + fi + done + fi + # check in a few other private locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ${srcdir}/../tk \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig=`(cd $i/unix; pwd)` + break + fi + done + fi + ]) + if test x"${ac_cv_c_tkconfig}" = x ; then + TK_BIN_DIR="# no Tk configs found" + AC_MSG_WARN("Cannot find Tk configuration definitions") + exit 0 + else + no_tk= + TK_BIN_DIR=${ac_cv_c_tkconfig} + AC_MSG_RESULT([found $TK_BIN_DIR/tkConfig.sh]) + fi + fi + +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_TCLCONFIG -- +# +# Load the tclConfig.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# TCL_BIN_DIR +# +# Results: +# +# Subst the following vars: +# TCL_BIN_DIR +# TCL_SRC_DIR +# TCL_LIB_FILE +# +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_LOAD_TCLCONFIG, [ + AC_MSG_CHECKING([for existence of $TCL_BIN_DIR/tclConfig.sh]) + + if test -f "$TCL_BIN_DIR/tclConfig.sh" ; then + AC_MSG_RESULT([loading]) + . $TCL_BIN_DIR/tclConfig.sh + else + AC_MSG_RESULT([file not found]) + fi + + # + # If the TCL_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TCL_LIB_SPEC will be set to the value + # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC + # instead of TCL_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + # + + if test -f $TCL_BIN_DIR/Makefile ; then + TCL_LIB_SPEC=${TCL_BUILD_LIB_SPEC} + TCL_STUB_LIB_SPEC=${TCL_BUILD_STUB_LIB_SPEC} + TCL_STUB_LIB_PATH=${TCL_BUILD_STUB_LIB_PATH} + fi + + # + # eval is required to do the TCL_DBGX substitution + # + + eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" + eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" + eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" + + eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" + eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" + eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" + + AC_SUBST(TCL_VERSION) + AC_SUBST(TCL_BIN_DIR) + AC_SUBST(TCL_SRC_DIR) + + AC_SUBST(TCL_LIB_FILE) + AC_SUBST(TCL_LIB_FLAG) + AC_SUBST(TCL_LIB_SPEC) + + AC_SUBST(TCL_STUB_LIB_FILE) + AC_SUBST(TCL_STUB_LIB_FLAG) + AC_SUBST(TCL_STUB_LIB_SPEC) + + AC_SUBST(TCL_LIBS) + AC_SUBST(TCL_DEFS) + AC_SUBST(TCL_EXTRA_CFLAGS) + AC_SUBST(TCL_LD_FLAGS) + AC_SUBST(TCL_SHLIB_LD_LIBS) + #AC_SUBST(TCL_BUILD_LIB_SPEC) + #AC_SUBST(TCL_BUILD_STUB_LIB_SPEC) +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_TKCONFIG -- +# +# Load the tkConfig.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# TK_BIN_DIR +# +# Results: +# +# Sets the following vars that should be in tkConfig.sh: +# TK_BIN_DIR +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_LOAD_TKCONFIG, [ + AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh]) + + if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then + AC_MSG_RESULT([loading]) + . $TK_BIN_DIR/tkConfig.sh + else + AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh]) + fi + + # + # If the TK_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TK_LIB_SPEC will be set to the value + # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC + # instead of TK_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + # + + if test -f $TK_BIN_DIR/Makefile ; then + TK_LIB_SPEC=${TK_BUILD_LIB_SPEC} + TK_STUB_LIB_SPEC=${TK_BUILD_STUB_LIB_SPEC} + TK_STUB_LIB_PATH=${TK_BUILD_STUB_LIB_PATH} + fi + + # + # eval is required to do the TK_DBGX substitution + # + + eval "TK_LIB_FILE=\"${TK_LIB_FILE}\"" + eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\"" + eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\"" + + eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\"" + eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\"" + eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\"" + + AC_SUBST(TK_VERSION) + AC_SUBST(TK_BIN_DIR) + AC_SUBST(TK_SRC_DIR) + + AC_SUBST(TK_LIB_FILE) + AC_SUBST(TK_LIB_FLAG) + AC_SUBST(TK_LIB_SPEC) + + AC_SUBST(TK_STUB_LIB_FILE) + AC_SUBST(TK_STUB_LIB_FLAG) + AC_SUBST(TK_STUB_LIB_SPEC) + + AC_SUBST(TK_LIBS) + AC_SUBST(TK_XINCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_SHARED -- +# +# Allows the building of shared libraries +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-shared=yes|no +# +# Defines the following vars: +# STATIC_BUILD Used for building import/export libraries +# on Windows. +# +# Sets the following vars: +# SHARED_BUILD Value of 1 or 0 +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_ENABLE_SHARED, [ + AC_MSG_CHECKING([how to build libraries]) + AC_ARG_ENABLE(shared, + [ --enable-shared build and link with shared libraries [--enable-shared]], + [tcl_ok=$enableval], [tcl_ok=yes]) + + if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + tcl_ok=$enableval + else + tcl_ok=yes + fi + + if test "$tcl_ok" = "yes" ; then + AC_MSG_RESULT([shared]) + SHARED_BUILD=1 + else + AC_MSG_RESULT([static]) + SHARED_BUILD=0 + AC_DEFINE(STATIC_BUILD, 1, [Is this a static build?]) + fi + AC_SUBST(SHARED_BUILD) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_THREADS -- +# +# Specify if thread support should be enabled. If "yes" is +# specified as an arg (optional), threads are enabled by default. +# TCL_THREADS is checked so that if you are compiling an extension +# against a threaded core, your extension must be compiled threaded +# as well. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-threads +# +# Sets the following vars: +# THREADS_LIBS Thread library(s) +# +# Defines the following vars: +# TCL_THREADS +# _REENTRANT +# +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_ENABLE_THREADS, [ + AC_ARG_ENABLE(threads, [ --enable-threads build with threads], + [tcl_ok=$enableval], [tcl_ok=$1]) + + if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then + TCL_THREADS=1 + + if test "${TEA_PLATFORM}" != "windows" ; then + # We are always OK on Windows, so check what this platform wants. + AC_DEFINE(USE_THREAD_ALLOC, 1, + [Do we want to use the threaded memory allocator?]) + AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) + AC_DEFINE(_THREAD_SAFE, 1, [Do we want the thread-safe OS API?]) + AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) + if test "$tcl_ok" = "no"; then + # Check a little harder for __pthread_mutex_init in the + # same library, as some systems hide it there until + # pthread.h is defined. We could alternatively do an + # AC_TRY_COMPILE with pthread.h, but that will work with + # libpthread really doesn't exist, like AIX 4.2. + # [Bug: 4359] + AC_CHECK_LIB(pthread, __pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + fi + + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthread" + else + AC_CHECK_LIB(pthreads, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthreads" + else + AC_CHECK_LIB(c, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "no"; then + AC_CHECK_LIB(c_r, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -pthread" + else + TCL_THREADS=0 + AC_MSG_WARN("Don t know how to find pthread lib on your system - thread support disabled") + fi + fi + fi + fi + + # Does the pthread-implementation provide + # 'pthread_attr_setstacksize' ? + + ac_saved_libs=$LIBS + LIBS="$LIBS $THREADS_LIBS" + AC_CHECK_FUNCS(pthread_attr_setstacksize) + LIBS=$ac_saved_libs + AC_CHECK_FUNCS(readdir_r) + fi + else + TCL_THREADS=0 + fi + # Do checking message here to not mess up interleaved configure output + AC_MSG_CHECKING([for building with threads]) + if test "${TCL_THREADS}" = "1"; then + AC_DEFINE(TCL_THREADS, 1, [Are we building with threads enabled?]) + #LIBS="$LIBS $THREADS_LIBS" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no (default)]) + fi + # TCL_THREADS sanity checking. See if our request for building with + # threads is the same as the way Tcl was built. If not, warn the user. + case ${TCL_DEFS} in + *THREADS=1*) + if test "${TCL_THREADS}" = "0"; then + AC_MSG_WARN([ + Building ${PACKAGE_NAME} without threads enabled, but building against a Tcl + that IS thread-enabled.]) + fi + ;; + *) + if test "${TCL_THREADS}" = "1"; then + AC_MSG_WARN([ + --enable-threads requested, but attempting building against a Tcl + that is NOT thread-enabled.]) + fi + ;; + esac + AC_SUBST(TCL_THREADS) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_SYMBOLS -- +# +# Specify if debugging symbols should be used +# Memory (TCL_MEM_DEBUG) debugging can also be enabled. +# +# Arguments: +# none +# +# Requires the following vars to be set: +# CFLAGS_DEBUG +# CFLAGS_OPTIMIZE +# LDFLAGS_DEBUG +# LDFLAGS_OPTIMIZE +# +# Results: +# +# Adds the following arguments to configure: +# --enable-symbols +# +# Defines the following vars: +# CFLAGS_DEFAULT Sets to CFLAGS_DEBUG if true +# Sets to CFLAGS_OPTIMIZE if false +# LDFLAGS_DEFAULT Sets to LDFLAGS_DEBUG if true +# Sets to LDFLAGS_OPTIMIZE if false +# DBGX Formerly used as debug library extension; +# always blank now. +# +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_ENABLE_SYMBOLS, [ + dnl Make sure we are initialized + AC_REQUIRE([TEA_CONFIG_CFLAGS]) + + DBGX="" + + AC_MSG_CHECKING([for build with symbols]) + AC_ARG_ENABLE(symbols, [ --enable-symbols build with debugging symbols [--disable-symbols]], [tcl_ok=$enableval], [tcl_ok=no]) + if test "$tcl_ok" = "no"; then + CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}" + LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" + AC_MSG_RESULT([no]) + else + CFLAGS_DEFAULT="${CFLAGS_DEBUG}" + LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" + if test "$tcl_ok" = "yes"; then + AC_MSG_RESULT([yes (standard debugging)]) + fi + fi + if test "${TEA_PLATFORM}" != "windows" ; then + LDFLAGS_DEFAULT="${LDFLAGS}" + fi + + AC_SUBST(TCL_DBGX) + AC_SUBST(CFLAGS_DEFAULT) + AC_SUBST(LDFLAGS_DEFAULT) + + if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then + AC_DEFINE(TCL_MEM_DEBUG, 1, [Is memory debugging enabled?]) + fi + + if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then + if test "$tcl_ok" = "all"; then + AC_MSG_RESULT([enabled symbols mem debugging]) + else + AC_MSG_RESULT([enabled $tcl_ok debugging]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_LANGINFO -- +# +# Allows use of modern nl_langinfo check for better l10n. +# This is only relevant for Unix. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-langinfo=yes|no (default is yes) +# +# Defines the following vars: +# HAVE_LANGINFO Triggers use of nl_langinfo if defined. +# +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_ENABLE_LANGINFO, [ + AC_ARG_ENABLE(langinfo, + [ --enable-langinfo use nl_langinfo if possible to determine + encoding at startup, otherwise use old heuristic], + [langinfo_ok=$enableval], [langinfo_ok=yes]) + + HAVE_LANGINFO=0 + if test "$langinfo_ok" = "yes"; then + if test "$langinfo_ok" = "yes"; then + AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no]) + fi + fi + AC_MSG_CHECKING([whether to use nl_langinfo]) + if test "$langinfo_ok" = "yes"; then + AC_TRY_COMPILE([#include ], + [nl_langinfo(CODESET);],[langinfo_ok=yes],[langinfo_ok=no]) + if test "$langinfo_ok" = "no"; then + langinfo_ok="no (could not compile with nl_langinfo)"; + fi + if test "$langinfo_ok" = "yes"; then + AC_DEFINE(HAVE_LANGINFO, 1, [Do we have nl_langinfo()?]) + fi + fi + AC_MSG_RESULT([$langinfo_ok]) +]) + +#-------------------------------------------------------------------- +# TEA_CONFIG_CFLAGS +# +# Try to determine the proper flags to pass to the compiler +# for building shared libraries and other such nonsense. +# +# Arguments: +# none +# +# Results: +# +# Defines the following vars: +# +# DL_OBJS - Name of the object file that implements dynamic +# loading for Tcl on this system. +# DL_LIBS - Library file(s) to include in tclsh and other base +# applications in order for the "load" command to work. +# LDFLAGS - Flags to pass to the compiler when linking object +# files into an executable application binary such +# as tclsh. +# LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib", +# that tell the run-time dynamic linker where to look +# for shared libraries such as libtcl.so. Depends on +# the variable LIB_RUNTIME_DIR in the Makefile. +# SHLIB_CFLAGS - Flags to pass to cc when compiling the components +# of a shared library (may request position-independent +# code, among other things). +# SHLIB_LD - Base command to use for combining object files +# into a shared library. +# SHLIB_LD_LIBS - Dependent libraries for the linker to scan when +# creating shared libraries. This symbol typically +# goes at the end of the "ld" commands that build +# shared libraries. The value of the symbol is +# "${LIBS}" if all of the dependent libraries should +# be specified when creating a shared library. If +# dependent libraries should not be specified (as on +# SunOS 4.x, where they cause the link to fail, or in +# general if Tcl and Tk aren't themselves shared +# libraries), then this symbol has an empty string +# as its value. +# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable +# extensions. An empty string means we don't know how +# to use shared libraries on this platform. +# TCL_LIB_FILE - Name of the file that contains the Tcl library, such +# as libtcl7.8.so or libtcl7.8.a. +# TCL_LIB_SUFFIX -Specifies everything that comes after the "libtcl" +# in the shared library name, using the +# ${PACKAGE_VERSION} variable to put the version in +# the right place. This is used by platforms that +# need non-standard library names. +# Examples: ${PACKAGE_VERSION}.so.1.1 on NetBSD, +# since it needs to have a version after the .so, and +# ${PACKAGE_VERSION}.a on AIX, since the Tcl shared +# library needs to have a .a extension whereas shared +# objects for loadable extensions have a .so +# extension. Defaults to +# ${PACKAGE_VERSION}${SHLIB_SUFFIX}. +# TCL_NEEDS_EXP_FILE - +# 1 means that an export file is needed to link to a +# shared library. +# TCL_EXP_FILE - The name of the installed export / import file which +# should be used to link to the Tcl shared library. +# Empty if Tcl is unshared. +# TCL_BUILD_EXP_FILE - +# The name of the built export / import file which +# should be used to link to the Tcl shared library. +# Empty if Tcl is unshared. +# CFLAGS_DEBUG - +# Flags used when running the compiler in debug mode +# CFLAGS_OPTIMIZE - +# Flags used when running the compiler in optimize mode +# CFLAGS - We add CFLAGS to pass to the compiler +# +# Subst's the following vars: +# DL_LIBS +# CFLAGS_DEBUG +# CFLAGS_OPTIMIZE +# CFLAGS_WARNING +# +# STLIB_LD +# SHLIB_LD +# SHLIB_CFLAGS +# LDFLAGS_DEBUG +# LDFLAGS_OPTIMIZE +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_CONFIG_CFLAGS, [ + dnl Make sure we are initialized + AC_REQUIRE([TEA_INIT]) + + # Step 0: Enable 64 bit support? + + AC_MSG_CHECKING([if 64bit support is enabled]) + AC_ARG_ENABLE(64bit,[ --enable-64bit enable 64bit support (where applicable)], [do64bit=$enableval], [do64bit=no]) + AC_MSG_RESULT([$do64bit]) + + # Step 0.b: Enable Solaris 64 bit VIS support? + + AC_MSG_CHECKING([if 64bit Sparc VIS support is requested]) + AC_ARG_ENABLE(64bit-vis,[ --enable-64bit-vis enable 64bit Sparc VIS support], [do64bitVIS=$enableval], [do64bitVIS=no]) + AC_MSG_RESULT([$do64bitVIS]) + + if test "$do64bitVIS" = "yes"; then + # Force 64bit on with VIS + do64bit=yes + fi + + # Step 0.c: Cross-compiling options for Windows/CE builds? + + if test "${TEA_PLATFORM}" = "windows" ; then + AC_MSG_CHECKING([if Windows/CE build is requested]) + AC_ARG_ENABLE(wince,[ --enable-wince enable Win/CE support (where applicable)], [doWince=$enableval], [doWince=no]) + AC_MSG_RESULT($doWince) + fi + + # Step 1: set the variable "system" to hold the name and version number + # for the system. This can usually be done via the "uname" command, but + # there are a few systems, like Next, where this doesn't work. + + AC_MSG_CHECKING([system version (for dynamic loading)]) + if test -f /usr/lib/NextStep/software_version; then + system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` + else + system=`uname -s`-`uname -r` + if test "$?" -ne 0 ; then + AC_MSG_RESULT([unknown (can't find uname command)]) + system=unknown + else + # Special check for weird MP-RAS system (uname returns weird + # results, and the version is kept in special file). + + if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then + system=MP-RAS-`awk '{print $3}' /etc/.relid'` + fi + if test "`uname -s`" = "AIX" ; then + system=AIX-`uname -v`.`uname -r` + fi + if test "${TEA_PLATFORM}" = "windows" ; then + system=windows + fi + AC_MSG_RESULT([$system]) + fi + fi + + # Step 2: check for existence of -ldl library. This is needed because + # Linux can use either -ldl or -ldld for dynamic loading. + + AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no) + + # Step 3: set configuration options based on system name and version. + # This is similar to Tcl's unix/tcl.m4 except that we've added a + # "windows" case and CC_SEARCH_FLAGS becomes LD_SEARCH_FLAGS for us + # (and we have no CC_SEARCH_FLAGS). + + do64bit_ok=no + LDFLAGS_ORIG="$LDFLAGS" + TCL_EXPORT_FILE_SUFFIX="" + UNSHARED_LIB_SUFFIX="" + TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`' + ECHO_VERSION='`echo ${PACKAGE_VERSION}`' + TCL_LIB_VERSIONS_OK=ok + CFLAGS_DEBUG=-g + if test "$GCC" = "yes" ; then + CFLAGS_OPTIMIZE=-O2 + CFLAGS_WARNING="-Wall -Wno-implicit-int" + else + CFLAGS_OPTIMIZE=-O + CFLAGS_WARNING="" + fi + TCL_NEEDS_EXP_FILE=0 + TCL_BUILD_EXP_FILE="" + TCL_EXP_FILE="" +dnl FIXME: Replace AC_CHECK_PROG with AC_CHECK_TOOL once cross compiling is fixed. +dnl AC_CHECK_TOOL(AR, ar, :) + AC_CHECK_PROG(AR, ar, ar) + STLIB_LD='${AR} cr' + LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" + case $system in + windows) + # This is a 2-stage check to make sure we have the 64-bit SDK + # We have to know where the SDK is installed. + if test "$do64bit" = "yes" ; then + if test "x${MSSDK}x" = "xx" ; then + MSSDK="C:/Progra~1/Microsoft SDK" + fi + # Ensure that this path has no spaces to work in autoconf + TEA_PATH_NOSPACE(MSSDK, ${MSSDK}) + if test ! -d "${MSSDK}/bin/win64" ; then + AC_MSG_WARN([could not find 64-bit SDK to enable 64bit mode]) + do64bit="no" + else + do64bit_ok="yes" + fi + fi + + if test "$doWince" != "no" ; then + if test "$do64bit" = "yes" ; then + AC_MSG_ERROR([Windows/CE and 64-bit builds incompatible]) + fi + if test "$GCC" = "yes" ; then + AC_MSG_ERROR([Windows/CE and GCC builds incompatible]) + fi + TEA_PATH_CELIB + # Set defaults for common evc4/PPC2003 setup + # Currently Tcl requires 300+, possibly 420+ for sockets + CEVERSION=420; # could be 211 300 301 400 420 ... + TARGETCPU=ARMV4; # could be ARMV4 ARM MIPS SH3 X86 ... + ARCH=ARM; # could be ARM MIPS X86EM ... + PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002" + if test "$doWince" != "yes"; then + # If !yes then the user specified something + # Reset ARCH to allow user to skip specifying it + ARCH= + eval `echo $doWince | awk -F, '{ \ + if (length([$]1)) { printf "CEVERSION=\"%s\"\n", [$]1; \ + if ([$]1 < 400) { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \ + if (length([$]2)) { printf "TARGETCPU=\"%s\"\n", toupper([$]2) }; \ + if (length([$]3)) { printf "ARCH=\"%s\"\n", toupper([$]3) }; \ + if (length([$]4)) { printf "PLATFORM=\"%s\"\n", [$]4 }; \ + }'` + if test "x${ARCH}" = "x" ; then + ARCH=$TARGETCPU; + fi + fi + OSVERSION=WCE$CEVERSION; + if test "x${WCEROOT}" = "x" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0" + if test ! -d "${WCEROOT}" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded Tools" + fi + fi + if test "x${SDKROOT}" = "x" ; then + SDKROOT="C:/Program Files/Windows CE Tools" + if test ! -d "${SDKROOT}" ; then + SDKROOT="C:/Windows CE Tools" + fi + fi + # Ensure that this path has no spaces to work in autoconf + TEA_PATH_NOSPACE(WCEROOT, ${WCEROOT}) + TEA_PATH_NOSPACE(SDKROOT, ${SDKROOT}) + if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \ + -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then + AC_MSG_ERROR([could not find PocketPC SDK or target compiler to enable WinCE mode [$CEVERSION,$TARGETCPU,$ARCH,$PLATFORM]]) + doWince="no" + else + # We could PATH_NOSPACE these, but that's not important, + # as long as we quote them when used. + CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include" + if test -d "${CEINCLUDE}/${TARGETCPU}" ; then + CEINCLUDE="${CEINCLUDE}/${TARGETCPU}" + fi + CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" + fi + fi + + if test "$GCC" != "yes" ; then + if test "${SHARED_BUILD}" = "0" ; then + runtime=-MT + else + runtime=-MD + fi + + if test "$do64bit" = "yes" ; then + # All this magic is necessary for the Win64 SDK RC1 - hobbs + CC="${MSSDK}/Bin/Win64/cl.exe" + CFLAGS="${CFLAGS} -I${MSSDK}/Include/prerelease \ + -I${MSSDK}/Include/Win64/crt \ + -I${MSSDK}/Include" + RC="${MSSDK}/bin/rc.exe" + lflags="-MACHINE:IA64 -LIBPATH:${MSSDK}/Lib/IA64 \ + -LIBPATH:${MSSDK}/Lib/Prerelease/IA64 -nologo" + LINKBIN="${MSSDK}/bin/win64/link.exe" + CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" + elif test "$doWince" != "no" ; then + CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin" + if test "${TARGETCPU}" = "X86"; then + CC="${CEBINROOT}/cl.exe" + else + CC="${CEBINROOT}/cl${ARCH}.exe" + fi + CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\"" + RC="${WCEROOT}/Common/EVC/bin/rc.exe" + arch=`echo ${ARCH} | awk '{print tolower([$]0)}'` + defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS" + if test "${SHARED_BUILD}" = "1" ; then + # Static CE builds require static celib as well + defs="${defs} _DLL" + fi + for i in $defs ; do + AC_DEFINE_UNQUOTED($i, 1, [WinCE def ]$i) + done + AC_DEFINE_UNQUOTED(_WIN32_WCE, $CEVERSION, [_WIN32_WCE version]) + AC_DEFINE_UNQUOTED(UNDER_CE, $CEVERSION, [UNDER_CE version]) + CFLAGS_DEBUG="-nologo -Zi -Od" + CFLAGS_OPTIMIZE="-nologo -Ox" + lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'` + lflags="-MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo" + LINKBIN="${CEBINROOT}/link.exe" + AC_SUBST(CELIB_DIR) + else + RC="rc" + lflags="-nologo" + LINKBIN="link" + CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" + fi + fi + + if test "$GCC" = "yes"; then + # mingw gcc mode + RC="windres" + CFLAGS_DEBUG="-g" + CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" + SHLIB_LD="$CC -shared" + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}" + LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}" + else + SHLIB_LD="${LINKBIN} -dll ${lflags}" + # link -lib only works when -lib is the first arg + STLIB_LD="${LINKBIN} -lib ${lflags}" + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib' + PATHTYPE=-w + # For information on what debugtype is most useful, see: + # http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp + # This essentially turns it all on. + LDFLAGS_DEBUG="-debug:full -debugtype:both -warn:2" + LDFLAGS_OPTIMIZE="-release" + if test "$doWince" != "no" ; then + LDFLAGS_CONSOLE="-link ${lflags}" + LDFLAGS_WINDOW=${LDFLAGS_CONSOLE} + else + LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}" + LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}" + fi + fi + + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".dll" + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll' + + TCL_LIB_VERSIONS_OK=nodots + # Bogus to avoid getting this turned off + DL_OBJS="tclLoadNone.obj" + ;; + AIX-*) + if test "${TCL_THREADS}" = "1" -a "$GCC" != "yes" ; then + # AIX requires the _r compiler when gcc isn't being used + if test "${CC}" != "cc_r" ; then + CC=${CC}_r + fi + AC_MSG_RESULT([Using $CC for compiling with threads]) + fi + LIBS="$LIBS -lc" + SHLIB_CFLAGS="" + SHLIB_SUFFIX=".so" + SHLIB_LD_LIBS='${LIBS}' + + DL_OBJS="tclLoadDl.o" + LD_LIBRARY_PATH_VAR="LIBPATH" + + # AIX v<=4.1 has some different flags than 4.2+ + if test "$system" = "AIX-4.1" -o "`uname -v`" -lt "4" ; then + #LIBOBJS="$LIBOBJS tclLoadAix.o" + AC_LIBOBJ([tclLoadAix]) + DL_LIBS="-lld" + fi + + # Check to enable 64-bit flags for compiler/linker on AIX 4+ + if test "$do64bit" = "yes" -a "`uname -v`" -gt "3" ; then + if test "$GCC" = "yes" ; then + AC_MSG_WARN("64bit mode not supported with GCC on $system") + else + do64bit_ok=yes + CFLAGS="$CFLAGS -q64" + LDFLAGS="$LDFLAGS -q64" + RANLIB="${RANLIB} -X64" + AR="${AR} -X64" + SHLIB_LD_FLAGS="-b64" + fi + fi + + if test "`uname -m`" = "ia64" ; then + # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + # AIX-5 has dl* in libc.so + DL_LIBS="" + if test "$GCC" = "yes" ; then + LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + else + LD_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' + fi + else + if test "$GCC" = "yes" ; then + SHLIB_LD="gcc -shared" + else + SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry" + fi + SHLIB_LD="${TCL_SRC_DIR}/unix/ldAix ${SHLIB_LD} ${SHLIB_LD_FLAGS}" + DL_LIBS="-ldl" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + TCL_NEEDS_EXP_FILE=1 + TCL_EXPORT_FILE_SUFFIX='${PACKAGE_VERSION}.exp' + fi + + # On AIX <=v4 systems, libbsd.a has to be linked in to support + # non-blocking file IO. This library has to be linked in after + # the MATH_LIBS or it breaks the pow() function. The way to + # insure proper sequencing, is to add it to the tail of MATH_LIBS. + # This library also supplies gettimeofday. + # + # AIX does not have a timezone field in struct tm. When the AIX + # bsd library is used, the timezone global and the gettimeofday + # methods are to be avoided for timezone deduction instead, we + # deduce the timezone by comparing the localtime result on a + # known GMT value. + + AC_CHECK_LIB(bsd, gettimeofday, libbsd=yes, libbsd=no) + if test $libbsd = yes; then + MATH_LIBS="$MATH_LIBS -lbsd" + AC_DEFINE(USE_DELTA_FOR_TZ, 1, [Do we need a special AIX hack for timezones?]) + fi + ;; + BeOS*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="${CC} -nostart" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + ;; + BSD/OS-2.1*|BSD/OS-3*) + SHLIB_CFLAGS="" + SHLIB_LD="shlicc -r" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LD_SEARCH_FLAGS="" + ;; + BSD/OS-4.*) + SHLIB_CFLAGS="-export-dynamic -fPIC" + SHLIB_LD="cc -shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="$LDFLAGS -export-dynamic" + LD_SEARCH_FLAGS="" + ;; + dgux*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LD_SEARCH_FLAGS="" + ;; + HP-UX-*.11.*) + # Use updated header definitions where possible + AC_DEFINE(_XOPEN_SOURCE_EXTENDED, 1, [Do we want to use the XOPEN network library?]) + + SHLIB_SUFFIX=".sl" + AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = yes; then + SHLIB_CFLAGS="+z" + SHLIB_LD="ld -b" + SHLIB_LD_LIBS='${LIBS}' + DL_OBJS="tclLoadShl.o" + DL_LIBS="-ldld" + LDFLAGS="$LDFLAGS -Wl,-E" + LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' + LD_LIBRARY_PATH_VAR="SHLIB_PATH" + fi + if test "$GCC" = "yes" ; then + SHLIB_LD="gcc -shared" + SHLIB_LD_LIBS='${LIBS}' + LD_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' + fi + + # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc + #CFLAGS="$CFLAGS +DAportable" + + # Check to enable 64-bit flags for compiler/linker + if test "$do64bit" = "yes" ; then + if test "$GCC" = "yes" ; then + hpux_arch=`${CC} -dumpmachine` + case $hpux_arch in + hppa64*) + # 64-bit gcc in use. Fix flags for GNU ld. + do64bit_ok=yes + SHLIB_LD="${CC} -shared" + SHLIB_LD_LIBS='${LIBS}' + ;; + *) + AC_MSG_WARN("64bit mode not supported with GCC on $system") + ;; + esac + else + do64bit_ok=yes + CFLAGS="$CFLAGS +DD64" + LDFLAGS="$LDFLAGS +DD64" + fi + fi + ;; + HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*) + SHLIB_SUFFIX=".sl" + AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = yes; then + SHLIB_CFLAGS="+z" + SHLIB_LD="ld -b" + SHLIB_LD_LIBS="" + DL_OBJS="tclLoadShl.o" + DL_LIBS="-ldld" + LDFLAGS="$LDFLAGS -Wl,-E" + LD_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' + fi + LD_LIBRARY_PATH_VAR="SHLIB_PATH" + ;; + IRIX-4.*) + SHLIB_CFLAGS="-G 0" + SHLIB_SUFFIX=".a" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" + SHLIB_LD_LIBS='${LIBS}' + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LDFLAGS="$LDFLAGS -Wl,-D,08000000" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + SHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a' + ;; + IRIX-5.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -shared -rdata_shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + ;; + IRIX-6.*|IRIX64-6.5*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + if test "$GCC" = "yes" ; then + CFLAGS="$CFLAGS -mabi=n32" + LDFLAGS="$LDFLAGS -mabi=n32" + else + case $system in + IRIX-6.3) + # Use to build 6.2 compatible binaries on 6.3. + CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS" + ;; + *) + CFLAGS="$CFLAGS -n32" + ;; + esac + LDFLAGS="$LDFLAGS -n32" + fi + ;; + IRIX64-6.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + + # Check to enable 64-bit flags for compiler/linker + + if test "$do64bit" = "yes" ; then + if test "$GCC" = "yes" ; then + AC_MSG_WARN([64bit mode not supported by gcc]) + else + do64bit_ok=yes + SHLIB_LD="ld -64 -shared -rdata_shared" + CFLAGS="$CFLAGS -64" + LDFLAGS="$LDFLAGS -64" + fi + fi + ;; + Linux*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + + CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" + # egcs-2.91.66 on Redhat Linux 6.0 generates lots of warnings + # when you inline the string and math operations. Turn this off to + # get rid of the warnings. + + #CFLAGS_OPTIMIZE="${CFLAGS_OPTIMIZE} -D__NO_STRING_INLINES -D__NO_MATH_INLINES" + + if test "$have_dl" = yes; then + SHLIB_LD="${CC} -shared" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="$LDFLAGS -Wl,--export-dynamic" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + else + AC_CHECK_HEADER(dld.h, [ + SHLIB_LD="ld -shared" + DL_OBJS="tclLoadDld.o" + DL_LIBS="-ldld" + LD_SEARCH_FLAGS=""]) + fi + if test "`uname -m`" = "alpha" ; then + CFLAGS="$CFLAGS -mieee" + fi + + # The combo of gcc + glibc has a bug related + # to inlining of functions like strtod(). The + # -fno-builtin flag should address this problem + # but it does not work. The -fno-inline flag + # is kind of overkill but it works. + # Disable inlining only when one of the + # files in compat/*.c is being linked in. + if test x"${USE_COMPAT}" != x ; then + CFLAGS="$CFLAGS -fno-inline" + fi + + ;; + GNU*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + + if test "$have_dl" = yes; then + SHLIB_LD="${CC} -shared" + DL_OBJS="" + DL_LIBS="-ldl" + LDFLAGS="$LDFLAGS -Wl,--export-dynamic" + LD_SEARCH_FLAGS="" + else + AC_CHECK_HEADER(dld.h, [ + SHLIB_LD="ld -shared" + DL_OBJS="" + DL_LIBS="-ldld" + LD_SEARCH_FLAGS=""]) + fi + if test "`uname -m`" = "alpha" ; then + CFLAGS="$CFLAGS -mieee" + fi + ;; + MP-RAS-02*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LD_SEARCH_FLAGS="" + ;; + MP-RAS-*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="$LDFLAGS -Wl,-Bexport" + LD_SEARCH_FLAGS="" + ;; + NetBSD-*|FreeBSD-[[1-2]].*) + # Not available on all versions: check for include file. + AC_CHECK_HEADER(dlfcn.h, [ + # NetBSD/SPARC needs -fPIC, -fpic will not do. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + AC_MSG_CHECKING([for ELF]) + AC_EGREP_CPP(yes, [ +#ifdef __ELF__ + yes +#endif + ], + AC_MSG_RESULT([yes]) + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so', + AC_MSG_RESULT([no]) + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0' + ) + ], [ + SHLIB_CFLAGS="" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".a" + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + ]) + + # FreeBSD doesn't handle version numbers with dots. + + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + OpenBSD-*) + SHLIB_LD="${CC} -shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS="" + AC_MSG_CHECKING(for ELF) + AC_EGREP_CPP(yes, [ +#ifdef __ELF__ + yes +#endif + ], + [AC_MSG_RESULT(yes) + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0'], + [AC_MSG_RESULT(no) + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0'] + ) + + # OpenBSD doesn't do version numbers with dots. + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + FreeBSD-*) + # FreeBSD 3.* and greater have ELF. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="$LDFLAGS -export-dynamic" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + if test "${TCL_THREADS}" = "1" ; then + # The -pthread needs to go in the CFLAGS, not LIBS + LIBS=`echo $LIBS | sed s/-pthread//` + CFLAGS="$CFLAGS -pthread" + LDFLAGS="$LDFLAGS -pthread" + fi + case $system in + FreeBSD-3.*) + # FreeBSD-3 doesn't handle version numbers with dots. + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so' + TCL_LIB_VERSIONS_OK=nodots + ;; + esac + ;; + Darwin-*) + CFLAGS_OPTIMIZE="-Os" + SHLIB_CFLAGS="-fno-common" + SHLIB_LD="cc -dynamiclib \${LDFLAGS}" + AC_CACHE_CHECK([if ld accepts -single_module flag], tcl_cv_ld_single_module, [ + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module" + AC_TRY_LINK(, [int i;], tcl_cv_ld_single_module=yes, tcl_cv_ld_single_module=no) + LDFLAGS=$hold_ldflags]) + if test $tcl_cv_ld_single_module = yes; then + SHLIB_LD="${SHLIB_LD} -Wl,-single_module" + fi + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".dylib" + DL_OBJS="tclLoadDyld.o" + DL_LIBS="" + LDFLAGS="$LDFLAGS -prebind" + AC_CACHE_CHECK([if ld accepts -search_paths_first flag], tcl_cv_ld_search_paths_first, [ + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-search_paths_first" + AC_TRY_LINK(, [int i;], tcl_cv_ld_search_paths_first=yes, tcl_cv_ld_search_paths_first=no) + LDFLAGS=$hold_ldflags]) + if test $tcl_cv_ld_search_paths_first = yes; then + LDFLAGS="$LDFLAGS -Wl,-search_paths_first" + fi + LD_SEARCH_FLAGS="" + LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" + ;; + NEXTSTEP-*) + SHLIB_CFLAGS="" + SHLIB_LD="cc -nostdlib -r" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadNext.o" + DL_LIBS="" + LD_SEARCH_FLAGS="" + ;; + OS/390-*) + CFLAGS_OPTIMIZE="" # Optimizer is buggy + AC_DEFINE(_OE_SOCKETS, 1, # needed in sys/socket.h + [Should OS/390 do the right thing with sockets?]) + ;; + OSF1-1.0|OSF1-1.1|OSF1-1.2) + # OSF/1 1.[012] from OSF, and derivatives, including Paragon OSF/1 + SHLIB_CFLAGS="" + # Hack: make package name same as library name + SHLIB_LD='ld -R -export $@:' + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadOSF.o" + DL_LIBS="" + LD_SEARCH_FLAGS="" + ;; + OSF1-1.*) + # OSF/1 1.3 from OSF using ELF, and derivatives, including AD2 + SHLIB_CFLAGS="-fPIC" + if test "$SHARED_BUILD" = "1" ; then + SHLIB_LD="ld -shared" + else + SHLIB_LD="ld -non_shared" + fi + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS="" + ;; + OSF1-V*) + # Digital OSF/1 + SHLIB_CFLAGS="" + if test "$SHARED_BUILD" = "1" ; then + SHLIB_LD='ld -shared -expect_unresolved "*"' + else + SHLIB_LD='ld -non_shared -expect_unresolved "*"' + fi + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' + if test "$GCC" = "yes" ; then + CFLAGS="$CFLAGS -mieee" + else + CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee" + fi + # see pthread_intro(3) for pthread support on osf1, k.furukawa + if test "${TCL_THREADS}" = "1" ; then + CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" + CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" + LIBS=`echo $LIBS | sed s/-lpthreads//` + if test "$GCC" = "yes" ; then + LIBS="$LIBS -lpthread -lmach -lexc" + else + CFLAGS="$CFLAGS -pthread" + LDFLAGS="$LDFLAGS -pthread" + fi + fi + + ;; + QNX-6*) + # QNX RTP + # This may work for all QNX, but it was only reported for v6. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + # dlopen is in -lc on QNX + DL_LIBS="" + LD_SEARCH_FLAGS="" + ;; + RISCos-*) + SHLIB_CFLAGS="-G 0" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".a" + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LDFLAGS="$LDFLAGS -Wl,-D,08000000" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + ;; + SCO_SV-3.2*) + # Note, dlopen is available only on SCO 3.2.5 and greater. However, + # this test works, since "uname -s" was non-standard in 3.2.4 and + # below. + if test "$GCC" = "yes" ; then + SHLIB_CFLAGS="-fPIC -melf" + LDFLAGS="$LDFLAGS -melf -Wl,-Bexport" + else + SHLIB_CFLAGS="-Kpic -belf" + LDFLAGS="$LDFLAGS -belf -Wl,-Bexport" + fi + SHLIB_LD="ld -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS="" + ;; + SINIX*5.4*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LD_SEARCH_FLAGS="" + ;; + SunOS-4*) + SHLIB_CFLAGS="-PIC" + SHLIB_LD="ld" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + + # SunOS can't handle version numbers with dots in them in library + # specs, like -ltcl7.5, so use -ltcl75 instead. Also, it + # requires an extra version number at the end of .so file names. + # So, the library has to have a name like libtcl75.so.1.0 + + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0' + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + SunOS-5.[[0-6]]*) + + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) + AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, + [Do we really want to follow the standard? Yes we do!]) + + SHLIB_CFLAGS="-KPIC" + + # Note: need the LIBS below, otherwise Tk won't find Tcl's + # symbols when dynamically loaded into tclsh. + + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + if test "$GCC" = "yes" ; then + SHLIB_LD="$CC -shared" + LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + else + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + fi + ;; + SunOS-5*) + + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) + AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, + [Do we really want to follow the standard? Yes we do!]) + + SHLIB_CFLAGS="-KPIC" + + # Check to enable 64-bit flags for compiler/linker + if test "$do64bit" = "yes" ; then + arch=`isainfo` + if test "$arch" = "sparcv9 sparc" ; then + if test "$GCC" = "yes" ; then + if test "`gcc -dumpversion` | awk -F. '{print $1}'" -lt "3" ; then + AC_MSG_WARN([64bit mode not supported with GCC < 3.2 on $system]) + else + do64bit_ok=yes + CFLAGS="$CFLAGS -m64 -mcpu=v9" + LDFLAGS="$LDFLAGS -m64 -mcpu=v9" + SHLIB_CFLAGS="-fPIC" + fi + else + do64bit_ok=yes + if test "$do64bitVIS" = "yes" ; then + CFLAGS="$CFLAGS -xarch=v9a" + LDFLAGS="$LDFLAGS -xarch=v9a" + else + CFLAGS="$CFLAGS -xarch=v9" + LDFLAGS="$LDFLAGS -xarch=v9" + fi + fi + else + AC_MSG_WARN("64bit mode only supported sparcv9 system") + fi + fi + + # Note: need the LIBS below, otherwise Tk won't find Tcl's + # symbols when dynamically loaded into tclsh. + + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + if test "$GCC" = "yes" ; then + SHLIB_LD="$CC -shared" + LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + if test "$do64bit" = "yes" ; then + # We need to specify -static-libgcc or we need to + # add the path to the sparv9 libgcc. + # JH: static-libgcc is necessary for core Tcl, but may + # not be necessary for extensions. + SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc" + # for finding sparcv9 libgcc, get the regular libgcc + # path, remove so name and append 'sparcv9' + #v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..." + #LD_SEARCH_FLAGS="${LD_SEARCH_FLAGS},-R,$v9gcclibdir" + fi + else + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + fi + ;; + ULTRIX-4.*) + SHLIB_CFLAGS="-G 0" + SHLIB_SUFFIX=".a" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" + SHLIB_LD_LIBS='${LIBS}' + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LDFLAGS="$LDFLAGS -Wl,-D,08000000" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + if test "$GCC" != "yes" ; then + CFLAGS="$CFLAGS -DHAVE_TZSET -std1" + fi + ;; + UNIX_SV* | UnixWare-5*) + SHLIB_CFLAGS="-KPIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers + # that don't grok the -Bexport option. Test that it does. + hold_ldflags=$LDFLAGS + AC_MSG_CHECKING(for ld accepts -Bexport flag) + LDFLAGS="$LDFLAGS -Wl,-Bexport" + AC_TRY_LINK(, [int i;], [found=yes], + [LDFLAGS=$hold_ldflags found=no]) + AC_MSG_RESULT([$found]) + LD_SEARCH_FLAGS="" + ;; + esac + + if test "$do64bit" = "yes" -a "$do64bit_ok" = "no" ; then + AC_MSG_WARN("64bit support being disabled -- don\'t know magic for this platform") + fi + + # Step 4: If pseudo-static linking is in use (see K. B. Kenny, "Dynamic + # Loading for Tcl -- What Became of It?". Proc. 2nd Tcl/Tk Workshop, + # New Orleans, LA, Computerized Processes Unlimited, 1994), then we need + # to determine which of several header files defines the a.out file + # format (a.out.h, sys/exec.h, or sys/exec_aout.h). At present, we + # support only a file format that is more or less version-7-compatible. + # In particular, + # - a.out files must begin with `struct exec'. + # - the N_TXTOFF on the `struct exec' must compute the seek address + # of the text segment + # - The `struct exec' must contain a_magic, a_text, a_data, a_bss + # and a_entry fields. + # The following compilation should succeed if and only if either sys/exec.h + # or a.out.h is usable for the purpose. + # + # Note that the modified COFF format used on MIPS Ultrix 4.x is usable; the + # `struct exec' includes a second header that contains information that + # duplicates the v7 fields that are needed. + + if test "x$DL_OBJS" = "xtclLoadAout.o" ; then + AC_MSG_CHECKING([sys/exec.h]) + AC_TRY_COMPILE([#include ],[ + struct exec foo; + unsigned long seek; + int flag; +#if defined(__mips) || defined(mips) + seek = N_TXTOFF (foo.ex_f, foo.ex_o); +#else + seek = N_TXTOFF (foo); +#endif + flag = (foo.a_magic == OMAGIC); + return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; + ], tcl_ok=usable, tcl_ok=unusable) + AC_MSG_RESULT([$tcl_ok]) + if test $tcl_ok = usable; then + AC_DEFINE(USE_SYS_EXEC_H, 1, + [Should we use when doing dynamic loading?]) + else + AC_MSG_CHECKING([a.out.h]) + AC_TRY_COMPILE([#include ],[ + struct exec foo; + unsigned long seek; + int flag; +#if defined(__mips) || defined(mips) + seek = N_TXTOFF (foo.ex_f, foo.ex_o); +#else + seek = N_TXTOFF (foo); +#endif + flag = (foo.a_magic == OMAGIC); + return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; + ], tcl_ok=usable, tcl_ok=unusable) + AC_MSG_RESULT([$tcl_ok]) + if test $tcl_ok = usable; then + AC_DEFINE(USE_A_OUT_H, 1, + [Should we use when doing dynamic loading?]) + else + AC_MSG_CHECKING([sys/exec_aout.h]) + AC_TRY_COMPILE([#include ],[ + struct exec foo; + unsigned long seek; + int flag; +#if defined(__mips) || defined(mips) + seek = N_TXTOFF (foo.ex_f, foo.ex_o); +#else + seek = N_TXTOFF (foo); +#endif + flag = (foo.a_midmag == OMAGIC); + return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; + ], tcl_ok=usable, tcl_ok=unusable) + AC_MSG_RESULT([$tcl_ok]) + if test $tcl_ok = usable; then + AC_DEFINE(USE_SYS_EXEC_AOUT_H, 1, + [Should we use when doing dynamic loading?]) + else + DL_OBJS="" + fi + fi + fi + fi + + # Step 5: disable dynamic loading if requested via a command-line switch. + + AC_ARG_ENABLE(load, [ --disable-load disallow dynamic loading and "load" command], + [tcl_ok=$enableval], [tcl_ok=yes]) + if test "$tcl_ok" = "no"; then + DL_OBJS="" + fi + + if test "x$DL_OBJS" != "x" ; then + BUILD_DLTEST="\$(DLTEST_TARGETS)" + else + echo "Can't figure out how to do dynamic loading or shared libraries" + echo "on this system." + SHLIB_CFLAGS="" + SHLIB_LD="" + SHLIB_SUFFIX="" + DL_OBJS="tclLoadNone.o" + DL_LIBS="" + LDFLAGS="$LDFLAGS_ORIG" + LD_SEARCH_FLAGS="" + BUILD_DLTEST="" + fi + + # If we're running gcc, then change the C flags for compiling shared + # libraries to the right flags for gcc, instead of those for the + # standard manufacturer compiler. + + if test "$DL_OBJS" != "tclLoadNone.o" ; then + if test "$GCC" = "yes" ; then + case $system in + AIX-*) + ;; + BSD/OS*) + ;; + IRIX*) + ;; + NetBSD-*|FreeBSD-*) + ;; + Darwin-*) + ;; + RISCos-*) + ;; + SCO_SV-3.2*) + ;; + ULTRIX-4.*) + ;; + windows) + ;; + *) + SHLIB_CFLAGS="-fPIC" + ;; + esac + fi + fi + + if test "$SHARED_LIB_SUFFIX" = "" ; then + SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}' + fi + if test "$UNSHARED_LIB_SUFFIX" = "" ; then + UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a' + fi + + AC_SUBST(DL_LIBS) + AC_SUBST(CFLAGS_DEBUG) + AC_SUBST(CFLAGS_OPTIMIZE) + AC_SUBST(CFLAGS_WARNING) + + AC_SUBST(STLIB_LD) + AC_SUBST(SHLIB_LD) + AC_SUBST(SHLIB_CFLAGS) + AC_SUBST(SHLIB_LD_LIBS) + AC_SUBST(LDFLAGS_DEBUG) + AC_SUBST(LDFLAGS_OPTIMIZE) + AC_SUBST(LD_LIBRARY_PATH_VAR) + + # These must be called after we do the basic CFLAGS checks and + # verify any possible 64-bit or similar switches are necessary + TEA_TCL_EARLY_FLAGS + TEA_TCL_64BIT_FLAGS +]) + +#-------------------------------------------------------------------- +# TEA_SERIAL_PORT +# +# Determine which interface to use to talk to the serial port. +# Note that #include lines must begin in leftmost column for +# some compilers to recognize them as preprocessor directives, +# and some build environments have stdin not pointing at a +# pseudo-terminal (usually /dev/null instead.) +# +# Arguments: +# none +# +# Results: +# +# Defines only one of the following vars: +# HAVE_SYS_MODEM_H +# USE_TERMIOS +# USE_TERMIO +# USE_SGTTY +# +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_SERIAL_PORT, [ + AC_CHECK_HEADERS(sys/modem.h) + AC_MSG_CHECKING([termios vs. termio vs. sgtty]) + AC_CACHE_VAL(tcl_cv_api_serial, [ + AC_TRY_RUN([ +#include + +int main() { + struct termios t; + if (tcgetattr(0, &t) == 0) { + cfsetospeed(&t, 0); + t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include + +int main() { + struct termio t; + if (ioctl(0, TCGETA, &t) == 0) { + t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include + +int main() { + struct sgttyb t; + if (ioctl(0, TIOCGETP, &t) == 0) { + t.sg_ospeed = 0; + t.sg_flags |= ODDP | EVENP | RAW; + return 0; + } + return 1; +}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none) + fi + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include +#include + +int main() { + struct termios t; + if (tcgetattr(0, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + cfsetospeed(&t, 0); + t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no; then + AC_TRY_RUN([ +#include +#include + +int main() { + struct termio t; + if (ioctl(0, TCGETA, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; + }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no; then + AC_TRY_RUN([ +#include +#include + +int main() { + struct sgttyb t; + if (ioctl(0, TIOCGETP, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + t.sg_ospeed = 0; + t.sg_flags |= ODDP | EVENP | RAW; + return 0; + } + return 1; +}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none) + fi]) + case $tcl_cv_api_serial in + termios) AC_DEFINE(USE_TERMIOS, 1, [Use the termios API for serial lines]);; + termio) AC_DEFINE(USE_TERMIO, 1, [Use the termio API for serial lines]);; + sgtty) AC_DEFINE(USE_SGTTY, 1, [Use the sgtty API for serial lines]);; + esac + AC_MSG_RESULT([$tcl_cv_api_serial]) +]) + +#-------------------------------------------------------------------- +# TEA_MISSING_POSIX_HEADERS +# +# Supply substitutes for missing POSIX header files. Special +# notes: +# - stdlib.h doesn't define strtol, strtoul, or +# strtod insome versions of SunOS +# - some versions of string.h don't declare procedures such +# as strstr +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# NO_DIRENT_H +# NO_ERRNO_H +# NO_VALUES_H +# HAVE_LIMITS_H or NO_LIMITS_H +# NO_STDLIB_H +# NO_STRING_H +# NO_SYS_WAIT_H +# NO_DLFCN_H +# HAVE_SYS_PARAM_H +# +# HAVE_STRING_H ? +# +# tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and +# CHECK on limits.h +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_MISSING_POSIX_HEADERS, [ + AC_MSG_CHECKING([dirent.h]) + AC_CACHE_VAL(tcl_cv_dirent_h, + AC_TRY_LINK([#include +#include ], [ +#ifndef _POSIX_SOURCE +# ifdef __Lynx__ + /* + * Generate compilation error to make the test fail: Lynx headers + * are only valid if really in the POSIX environment. + */ + + missing_procedure(); +# endif +#endif +DIR *d; +struct dirent *entryPtr; +char *p; +d = opendir("foobar"); +entryPtr = readdir(d); +p = entryPtr->d_name; +closedir(d); +], tcl_cv_dirent_h=yes, tcl_cv_dirent_h=no)) + + if test $tcl_cv_dirent_h = no; then + AC_DEFINE(NO_DIRENT_H, 1, [Do we have ?]) + fi + + AC_MSG_RESULT([$tcl_ok]) + AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(limits.h, + [AC_DEFINE(HAVE_LIMITS_H, 1, [Do we have ?])], + [AC_DEFINE(NO_LIMITS_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0) + AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0) + AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0) + AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0) + if test $tcl_ok = 0; then + AC_DEFINE(NO_STDLIB_H, 1, [Do we have ?]) + fi + AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0) + AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0) + AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0) + + # See also memmove check below for a place where NO_STRING_H can be + # set and why. + + if test $tcl_ok = 0; then + AC_DEFINE(NO_STRING_H, 1, [Do we have ?]) + fi + + AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H, 1, [Do we have ?])]) + + # OS/390 lacks sys/param.h (and doesn't need it, by chance). + AC_HAVE_HEADERS(sys/param.h) + +]) + +#-------------------------------------------------------------------- +# TEA_PATH_X +# +# Locate the X11 header files and the X11 library archive. Try +# the ac_path_x macro first, but if it doesn't find the X stuff +# (e.g. because there's no xmkmf program) then check through +# a list of possible directories. Under some conditions the +# autoconf macro will return an include directory that contains +# no include files, so double-check its result just to be safe. +# +# This should be called after TEA_CONFIG_CFLAGS as setting the +# LIBS line can confuse some configure macro magic. +# +# Arguments: +# none +# +# Results: +# +# Sets the following vars: +# XINCLUDES +# XLIBSW +# LIBS (appends to) +# TEA_WINDOWINGSYSTEM +# +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_PATH_X, [ + if test "${TEA_PLATFORM}" = "unix" ; then + case ${TK_DEFS} in + *MAC_OSX_TK*) + AC_DEFINE(MAC_OSX_TK, 1 [Are we building against Mac OS X TkAqua?]) + TEA_WINDOWINGSYSTEM="aqua" + if test -z "${ac_cv_c_tkh}" -o ! -r "${ac_cv_c_tkh}/X11/Xlib.h"; then + TK_XINCLUDES='-I${TK_SRC_DIR}/xlib' + fi + ;; + *) + TEA_PATH_UNIX_X + TEA_WINDOWINGSYSTEM="x11" + ;; + esac + elif test "${TEA_PLATFORM}" = "windows" ; then + TEA_WINDOWINGSYSTEM="windows" + fi +]) + +AC_DEFUN(TEA_PATH_UNIX_X, [ + AC_PATH_X + not_really_there="" + if test "$no_x" = ""; then + if test "$x_includes" = ""; then + AC_TRY_CPP([#include ], , not_really_there="yes") + else + if test ! -r $x_includes/X11/Intrinsic.h; then + not_really_there="yes" + fi + fi + fi + if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then + AC_MSG_CHECKING([for X11 header files]) + XINCLUDES="# no special path needed" + AC_TRY_CPP([#include ], , XINCLUDES="nope") + if test "$XINCLUDES" = nope; then + dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" + for i in $dirs ; do + if test -r $i/X11/Intrinsic.h; then + AC_MSG_RESULT([$i]) + XINCLUDES=" -I$i" + break + fi + done + fi + else + if test "$x_includes" != ""; then + XINCLUDES=-I$x_includes + else + XINCLUDES="# no special path needed" + fi + fi + if test "$XINCLUDES" = nope; then + AC_MSG_RESULT([could not find any!]) + XINCLUDES="# no include files found" + fi + + if test "$no_x" = yes; then + AC_MSG_CHECKING([for X11 libraries]) + XLIBSW=nope + dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" + for i in $dirs ; do + if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl; then + AC_MSG_RESULT([$i]) + XLIBSW="-L$i -lX11" + x_libraries="$i" + break + fi + done + else + if test "$x_libraries" = ""; then + XLIBSW=-lX11 + else + XLIBSW="-L$x_libraries -lX11" + fi + fi + if test "$XLIBSW" = nope ; then + AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow) + fi + if test "$XLIBSW" = nope ; then + AC_MSG_RESULT([could not find any! Using -lX11.]) + XLIBSW=-lX11 + fi + if test x"${XLIBSW}" != x ; then + PKG_LIBS="${PKG_LIBS} ${XLIBSW}" + fi +]) + +#-------------------------------------------------------------------- +# TEA_BLOCKING_STYLE +# +# The statements below check for systems where POSIX-style +# non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented. +# On these systems (mostly older ones), use the old BSD-style +# FIONBIO approach instead. +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# HAVE_SYS_IOCTL_H +# HAVE_SYS_FILIO_H +# USE_FIONBIO +# O_NONBLOCK +# +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_BLOCKING_STYLE, [ + AC_CHECK_HEADERS(sys/ioctl.h) + AC_CHECK_HEADERS(sys/filio.h) + AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O]) + if test -f /usr/lib/NextStep/software_version; then + system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` + else + system=`uname -s`-`uname -r` + if test "$?" -ne 0 ; then + system=unknown + else + # Special check for weird MP-RAS system (uname returns weird + # results, and the version is kept in special file). + + if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then + system=MP-RAS-`awk '{print $3}' /etc/.relid'` + fi + if test "`uname -s`" = "AIX" ; then + system=AIX-`uname -v`.`uname -r` + fi + fi + fi + case $system in + # There used to be code here to use FIONBIO under AIX. However, it + # was reported that FIONBIO doesn't work under AIX 3.2.5. Since + # using O_NONBLOCK seems fine under AIX 4.*, I removed the FIONBIO + # code (JO, 5/31/97). + + OSF*) + AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) + AC_MSG_RESULT([FIONBIO]) + ;; + SunOS-4*) + AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) + AC_MSG_RESULT([FIONBIO]) + ;; + ULTRIX-4.*) + AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) + AC_MSG_RESULT([FIONBIO]) + ;; + *) + AC_MSG_RESULT([O_NONBLOCK]) + ;; + esac +]) + +#-------------------------------------------------------------------- +# TEA_TIME_HANLDER +# +# Checks how the system deals with time.h, what time structures +# are used on the system, and what fields the structures have. +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# USE_DELTA_FOR_TZ +# HAVE_TM_GMTOFF +# HAVE_TM_TZADJ +# HAVE_TIMEZONE_VAR +# +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_TIME_HANDLER, [ + AC_CHECK_HEADERS(sys/time.h) + AC_HEADER_TIME + AC_STRUCT_TIMEZONE + + AC_CHECK_FUNCS(gmtime_r localtime_r) + + AC_MSG_CHECKING([tm_tzadj in struct tm]) + AC_CACHE_VAL(tcl_cv_member_tm_tzadj, + AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_tzadj;], + tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)) + AC_MSG_RESULT([$tcl_cv_member_tm_tzadj]) + if test $tcl_cv_member_tm_tzadj = yes ; then + AC_DEFINE(HAVE_TM_TZADJ, 1, [Should we use the tm_tzadj field of struct tm?]) + fi + + AC_MSG_CHECKING([tm_gmtoff in struct tm]) + AC_CACHE_VAL(tcl_cv_member_tm_gmtoff, + AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_gmtoff;], + tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)) + AC_MSG_RESULT([$tcl_cv_member_tm_gmtoff]) + if test $tcl_cv_member_tm_gmtoff = yes ; then + AC_DEFINE(HAVE_TM_GMTOFF, 1, [Should we use the tm_gmtoff field of struct tm?]) + fi + + # + # Its important to include time.h in this check, as some systems + # (like convex) have timezone functions, etc. + # + AC_MSG_CHECKING([long timezone variable]) + AC_CACHE_VAL(tcl_cv_var_timezone, + AC_TRY_COMPILE([#include ], + [extern long timezone; + timezone += 1; + exit (0);], + tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)) + AC_MSG_RESULT([$tcl_cv_timezone_long]) + if test $tcl_cv_timezone_long = yes ; then + AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) + else + # + # On some systems (eg IRIX 6.2), timezone is a time_t and not a long. + # + AC_MSG_CHECKING([time_t timezone variable]) + AC_CACHE_VAL(tcl_cv_timezone_time, + AC_TRY_COMPILE([#include ], + [extern time_t timezone; + timezone += 1; + exit (0);], + tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)) + AC_MSG_RESULT([$tcl_cv_timezone_time]) + if test $tcl_cv_timezone_time = yes ; then + AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) + fi + fi +]) + +#-------------------------------------------------------------------- +# TEA_BUGGY_STRTOD +# +# Under Solaris 2.4, strtod returns the wrong value for the +# terminating character under some conditions. Check for this +# and if the problem exists use a substitute procedure +# "fixstrtod" (provided by Tcl) that corrects the error. +# Also, on Compaq's Tru64 Unix 5.0, +# strtod(" ") returns 0.0 instead of a failure to convert. +# +# Arguments: +# none +# +# Results: +# +# Might defines some of the following vars: +# strtod (=fixstrtod) +# +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_BUGGY_STRTOD, [ + AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0) + if test "$tcl_strtod" = 1; then + AC_MSG_CHECKING([for Solaris2.4/Tru64 strtod bugs]) + AC_CACHE_VAL(tcl_cv_strtod_buggy,[ + AC_TRY_RUN([ + extern double strtod(); + int main() + { + char *string = "NaN", *spaceString = " "; + char *term; + double value; + value = strtod(string, &term); + if ((term != string) && (term[-1] == 0)) { + exit(1); + } + value = strtod(spaceString, &term); + if (term == (spaceString+1)) { + exit(1); + } + exit(0); + }], tcl_cv_strtod_buggy=1, tcl_cv_strtod_buggy=0, tcl_cv_strtod_buggy=0)]) + if test "$tcl_cv_strtod_buggy" = 1; then + AC_MSG_RESULT([ok]) + else + AC_MSG_RESULT([buggy]) + #LIBOBJS="$LIBOBJS fixstrtod.o" + AC_LIBOBJ([fixstrtod]) + USE_COMPAT=1 + AC_DEFINE(strtod, fixstrtod, [Do we want to use the strtod() in compat?]) + fi + fi +]) + +#-------------------------------------------------------------------- +# TEA_TCL_LINK_LIBS +# +# Search for the libraries needed to link the Tcl shell. +# Things like the math library (-lm) and socket stuff (-lsocket vs. +# -lnsl) are dealt with here. +# +# Arguments: +# Requires the following vars to be set in the Makefile: +# DL_LIBS +# LIBS +# MATH_LIBS +# +# Results: +# +# Subst's the following var: +# TCL_LIBS +# MATH_LIBS +# +# Might append to the following vars: +# LIBS +# +# Might define the following vars: +# HAVE_NET_ERRNO_H +# +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_TCL_LINK_LIBS, [ + #-------------------------------------------------------------------- + # On a few very rare systems, all of the libm.a stuff is + # already in libc.a. Set compiler flags accordingly. + # Also, Linux requires the "ieee" library for math to work + # right (and it must appear before "-lm"). + #-------------------------------------------------------------------- + + AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm") + AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"]) + + #-------------------------------------------------------------------- + # Interactive UNIX requires -linet instead of -lsocket, plus it + # needs net/errno.h to define the socket-related error codes. + #-------------------------------------------------------------------- + + AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"]) + AC_CHECK_HEADER(net/errno.h, [ + AC_DEFINE(HAVE_NET_ERRNO_H, 1, [Do we have ?])]) + + #-------------------------------------------------------------------- + # Check for the existence of the -lsocket and -lnsl libraries. + # The order here is important, so that they end up in the right + # order in the command line generated by make. Here are some + # special considerations: + # 1. Use "connect" and "accept" to check for -lsocket, and + # "gethostbyname" to check for -lnsl. + # 2. Use each function name only once: can't redo a check because + # autoconf caches the results of the last check and won't redo it. + # 3. Use -lnsl and -lsocket only if they supply procedures that + # aren't already present in the normal libraries. This is because + # IRIX 5.2 has libraries, but they aren't needed and they're + # bogus: they goof up name resolution if used. + # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. + # To get around this problem, check for both libraries together + # if -lsocket doesn't work by itself. + #-------------------------------------------------------------------- + + tcl_checkBoth=0 + AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1) + if test "$tcl_checkSocket" = 1; then + AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt, + LIBS="$LIBS -lsocket", tcl_checkBoth=1)]) + fi + if test "$tcl_checkBoth" = 1; then + tk_oldLibs=$LIBS + LIBS="$LIBS -lsocket -lnsl" + AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs]) + fi + AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname, + [LIBS="$LIBS -lnsl"])]) + + # Don't perform the eval of the libraries here because DL_LIBS + # won't be set until we call TEA_CONFIG_CFLAGS + + TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}' + AC_SUBST(TCL_LIBS) + AC_SUBST(MATH_LIBS) +]) + +#-------------------------------------------------------------------- +# TEA_TCL_EARLY_FLAGS +# +# Check for what flags are needed to be passed so the correct OS +# features are available. +# +# Arguments: +# None +# +# Results: +# +# Might define the following vars: +# _ISOC99_SOURCE +# _LARGEFILE64_SOURCE +# +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_TCL_EARLY_FLAG,[ + AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]), + AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no, + AC_TRY_COMPILE([[#define ]$1[ 1 +]$2], $3, + [tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes, + [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no))) + if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then + AC_DEFINE($1, 1, [Add the ]$1[ flag when building]) + tcl_flags="$tcl_flags $1" + fi +]) + +AC_DEFUN(TEA_TCL_EARLY_FLAGS,[ + AC_MSG_CHECKING([for required early compiler flags]) + tcl_flags="" + TEA_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include ], + [char *p = (char *)strtoll; char *q = (char *)strtoull;]) + TEA_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include ], + [struct stat64 buf; int i = stat64("/", &buf);]) + if test "x${tcl_flags}" = "x" ; then + AC_MSG_RESULT([none]) + else + AC_MSG_RESULT([${tcl_flags}]) + fi +]) + +#-------------------------------------------------------------------- +# TEA_TCL_64BIT_FLAGS +# +# Check for what is defined in the way of 64-bit features. +# +# Arguments: +# None +# +# Results: +# +# Might define the following vars: +# TCL_WIDE_INT_IS_LONG +# TCL_WIDE_INT_TYPE +# HAVE_STRUCT_DIRENT64 +# HAVE_STRUCT_STAT64 +# HAVE_TYPE_OFF64_T +# +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_TCL_64BIT_FLAGS, [ + AC_MSG_CHECKING([for 64-bit integer type]) + AC_CACHE_VAL(tcl_cv_type_64bit,[ + tcl_cv_type_64bit=none + # See if the compiler knows natively about __int64 + AC_TRY_COMPILE(,[__int64 value = (__int64) 0;], + tcl_type_64bit=__int64, tcl_type_64bit="long long") + # See if we should use long anyway Note that we substitute in the + # type that is our current guess for a 64-bit type inside this check + # program, so it should be modified only carefully... + AC_TRY_COMPILE(,[switch (0) { + case 1: case (sizeof(]${tcl_type_64bit}[)==sizeof(long)): ; + }],tcl_cv_type_64bit=${tcl_type_64bit})]) + if test "${tcl_cv_type_64bit}" = none ; then + AC_DEFINE(TCL_WIDE_INT_IS_LONG, 1, [Are wide integers to be implemented with C 'long's?]) + AC_MSG_RESULT([using long]) + elif test "${tcl_cv_type_64bit}" = "__int64" \ + -a "${TEA_PLATFORM}" = "windows" ; then + # We actually want to use the default tcl.h checks in this + # case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER* + AC_MSG_RESULT([using Tcl header defaults]) + else + AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit}, + [What type should be used to define wide integers?]) + AC_MSG_RESULT([${tcl_cv_type_64bit}]) + + # Now check for auxiliary declarations + AC_MSG_CHECKING([for struct dirent64]) + AC_CACHE_VAL(tcl_cv_struct_dirent64,[ + AC_TRY_COMPILE([#include +#include ],[struct dirent64 p;], + tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)]) + if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then + AC_DEFINE(HAVE_STRUCT_DIRENT64, 1, [Is 'struct dirent64' in ?]) + fi + AC_MSG_RESULT([${tcl_cv_struct_dirent64}]) + + AC_MSG_CHECKING([for struct stat64]) + AC_CACHE_VAL(tcl_cv_struct_stat64,[ + AC_TRY_COMPILE([#include ],[struct stat64 p; +], + tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)]) + if test "x${tcl_cv_struct_stat64}" = "xyes" ; then + AC_DEFINE(HAVE_STRUCT_STAT64, 1, [Is 'struct stat64' in ?]) + fi + AC_MSG_RESULT([${tcl_cv_struct_stat64}]) + + AC_MSG_CHECKING([for off64_t]) + AC_CACHE_VAL(tcl_cv_type_off64_t,[ + AC_TRY_COMPILE([#include ],[off64_t offset; +], + tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)]) + if test "x${tcl_cv_type_off64_t}" = "xyes" ; then + AC_DEFINE(HAVE_TYPE_OFF64_T, 1, [Is off64_t in ?]) + fi + AC_MSG_RESULT([${tcl_cv_type_off64_t}]) + fi +]) + +## +## Here ends the standard Tcl configuration bits and starts the +## TEA specific functions +## + +#------------------------------------------------------------------------ +# TEA_INIT -- +# +# Init various Tcl Extension Architecture (TEA) variables. +# This should be the first called TEA_* macro. +# +# Arguments: +# none +# +# Results: +# +# Defines and substs the following vars: +# CYGPATH +# EXEEXT +# Defines only: +# TEA_INITED +# TEA_PLATFORM (windows or unix) +# +# "cygpath" is used on windows to generate native path names for include +# files. These variables should only be used with the compiler and linker +# since they generate native path names. +# +# EXEEXT +# Select the executable extension based on the host type. This +# is a lightweight replacement for AC_EXEEXT that doesn't require +# a compiler. +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_INIT, [ + # TEA extensions pass this us the version of TEA they think they + # are compatible with. + TEA_VERSION="3.2" + + AC_MSG_CHECKING([for correct TEA configuration]) + if test x"${PACKAGE_NAME}" = x ; then + AC_MSG_ERROR([ +The PACKAGE_NAME variable must be defined by your TEA configure.in]) + fi + if test x"$1" = x ; then + AC_MSG_ERROR([ +TEA version not specified.]) + elif test "$1" != "${TEA_VERSION}" ; then + AC_MSG_RESULT([warning: requested TEA version "$1", have "${TEA_VERSION}"]) + else + AC_MSG_RESULT([ok (TEA ${TEA_VERSION})]) + fi + case "`uname -s`" in + *win32*|*WIN32*|*CYGWIN_NT*|*CYGWIN_9*|*CYGWIN_ME*|*MINGW32_*) + AC_CHECK_PROG(CYGPATH, cygpath, cygpath -w, echo) + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *) + CYGPATH=echo + EXEEXT="" + TEA_PLATFORM="unix" + ;; + esac + + # Check if exec_prefix is set. If not use fall back to prefix. + # Note when adjusted, so that TEA_PREFIX can correct for this. + # This is needed for recursive configures, since autoconf propagates + # $prefix, but not $exec_prefix (doh!). + if test x$exec_prefix = xNONE ; then + exec_prefix_default=yes + exec_prefix=$prefix + fi + + AC_SUBST(EXEEXT) + AC_SUBST(CYGPATH) + + # This package name must be replaced statically for AC_SUBST to work + AC_SUBST(PKG_LIB_FILE) + # Substitute STUB_LIB_FILE in case package creates a stub library too. + AC_SUBST(PKG_STUB_LIB_FILE) + + # We AC_SUBST these here to ensure they are subst'ed, + # in case the user doesn't call TEA_ADD_... + AC_SUBST(PKG_STUB_SOURCES) + AC_SUBST(PKG_STUB_OBJECTS) + AC_SUBST(PKG_TCL_SOURCES) + AC_SUBST(PKG_HEADERS) + AC_SUBST(PKG_INCLUDES) + AC_SUBST(PKG_LIBS) + AC_SUBST(PKG_CFLAGS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_SOURCES -- +# +# Specify one or more source files. Users should check for +# the right platform before adding to their list. +# It is not important to specify the directory, as long as it is +# in the generic, win or unix subdirectory of $(srcdir). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_SOURCES +# PKG_OBJECTS +#------------------------------------------------------------------------ +AC_DEFUN(TEA_ADD_SOURCES, [ + vars="$@" + for i in $vars; do + case $i in + [\$]*) + # allow $-var names + PKG_SOURCES="$PKG_SOURCES $i" + PKG_OBJECTS="$PKG_OBJECTS $i" + ;; + *) + # check for existence - allows for generic/win/unix VPATH + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + ; then + AC_MSG_ERROR([could not find source file '$i']) + fi + PKG_SOURCES="$PKG_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" + fi + PKG_OBJECTS="$PKG_OBJECTS $j" + ;; + esac + done + AC_SUBST(PKG_SOURCES) + AC_SUBST(PKG_OBJECTS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_STUB_SOURCES -- +# +# Specify one or more source files. Users should check for +# the right platform before adding to their list. +# It is not important to specify the directory, as long as it is +# in the generic, win or unix subdirectory of $(srcdir). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_STUB_SOURCES +# PKG_STUB_OBJECTS +#------------------------------------------------------------------------ +AC_DEFUN(TEA_ADD_STUB_SOURCES, [ + vars="$@" + for i in $vars; do + # check for existence - allows for generic/win/unix VPATH + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + ; then + AC_MSG_ERROR([could not find stub source file '$i']) + fi + PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" + fi + PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j" + done + AC_SUBST(PKG_STUB_SOURCES) + AC_SUBST(PKG_STUB_OBJECTS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_TCL_SOURCES -- +# +# Specify one or more Tcl source files. These should be platform +# independent runtime files. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_TCL_SOURCES +#------------------------------------------------------------------------ +AC_DEFUN(TEA_ADD_TCL_SOURCES, [ + vars="$@" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + AC_MSG_ERROR([could not find tcl source file '${srcdir}/$i']) + fi + PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i" + done + AC_SUBST(PKG_TCL_SOURCES) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_HEADERS -- +# +# Specify one or more source headers. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_HEADERS +#------------------------------------------------------------------------ +AC_DEFUN(TEA_ADD_HEADERS, [ + vars="$@" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + AC_MSG_ERROR([could not find header file '${srcdir}/$i']) + fi + PKG_HEADERS="$PKG_HEADERS $i" + done + AC_SUBST(PKG_HEADERS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_INCLUDES -- +# +# Specify one or more include dirs. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_INCLUDES +#------------------------------------------------------------------------ +AC_DEFUN(TEA_ADD_INCLUDES, [ + vars="$@" + for i in $vars; do + PKG_INCLUDES="$PKG_INCLUDES $i" + done + AC_SUBST(PKG_INCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_LIBS -- +# +# Specify one or more libraries. Users should check for +# the right platform before adding to their list. For Windows, +# libraries provided in "foo.lib" format will be converted to +# "-lfoo" when using GCC (mingw). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_LIBS +#------------------------------------------------------------------------ +AC_DEFUN(TEA_ADD_LIBS, [ + vars="$@" + for i in $vars; do + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then + # Convert foo.lib to -lfoo for GCC. No-op if not *.lib + i=`echo "$i" | sed -e 's/^\([[^-]].*\)\.lib[$]/-l\1/i'` + fi + PKG_LIBS="$PKG_LIBS $i" + done + AC_SUBST(PKG_LIBS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_CFLAGS -- +# +# Specify one or more CFLAGS. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_CFLAGS +#------------------------------------------------------------------------ +AC_DEFUN(TEA_ADD_CFLAGS, [ + PKG_CFLAGS="$PKG_CFLAGS $@" + AC_SUBST(PKG_CFLAGS) +]) + +#------------------------------------------------------------------------ +# TEA_PREFIX -- +# +# Handle the --prefix=... option by defaulting to what Tcl gave +# +# Arguments: +# none +# +# Results: +# +# If --prefix or --exec-prefix was not specified, $prefix and +# $exec_prefix will be set to the values given to Tcl when it was +# configured. +#------------------------------------------------------------------------ +AC_DEFUN(TEA_PREFIX, [ + if test "${prefix}" = "NONE"; then + prefix_default=yes + if test x"${TCL_PREFIX}" != x; then + AC_MSG_NOTICE([--prefix defaulting to TCL_PREFIX ${TCL_PREFIX}]) + prefix=${TCL_PREFIX} + else + AC_MSG_NOTICE([--prefix defaulting to /usr/local]) + prefix=/usr/local + fi + fi + if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \ + -o x"${exec_prefix_default}" = x"yes" ; then + if test x"${TCL_EXEC_PREFIX}" != x; then + AC_MSG_NOTICE([--exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}]) + exec_prefix=${TCL_EXEC_PREFIX} + else + AC_MSG_NOTICE([--exec-prefix defaulting to ${prefix}]) + exec_prefix=$prefix + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_SETUP_COMPILER_CC -- +# +# Do compiler checks the way we want. This is just a replacement +# for AC_PROG_CC in TEA configure.in files to make them cleaner. +# +# Arguments: +# none +# +# Results: +# +# Sets up CC var and other standard bits we need to make executables. +#------------------------------------------------------------------------ +AC_DEFUN(TEA_SETUP_COMPILER_CC, [ + # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE) + # in this macro, they need to go into TEA_SETUP_COMPILER instead. + + # If the user did not set CFLAGS, set it now to keep + # the AC_PROG_CC macro from adding "-g -O2". + if test "${CFLAGS+set}" != "set" ; then + CFLAGS="" + fi + + AC_PROG_CC + AC_PROG_CPP + + AC_PROG_INSTALL + + #-------------------------------------------------------------------- + # Checks to see if the make program sets the $MAKE variable. + #-------------------------------------------------------------------- + + AC_PROG_MAKE_SET + + #-------------------------------------------------------------------- + # Find ranlib + #-------------------------------------------------------------------- + + AC_PROG_RANLIB + + #-------------------------------------------------------------------- + # Determines the correct binary file extension (.o, .obj, .exe etc.) + #-------------------------------------------------------------------- + + AC_OBJEXT + AC_EXEEXT +]) + +#------------------------------------------------------------------------ +# TEA_SETUP_COMPILER -- +# +# Do compiler checks that use the compiler. This must go after +# TEA_SETUP_COMPILER_CC, which does the actual compiler check. +# +# Arguments: +# none +# +# Results: +# +# Sets up CC var and other standard bits we need to make executables. +#------------------------------------------------------------------------ +AC_DEFUN(TEA_SETUP_COMPILER, [ + # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here. + AC_REQUIRE([TEA_SETUP_COMPILER_CC]) + + #------------------------------------------------------------------------ + # If we're using GCC, see if the compiler understands -pipe. If so, use it. + # It makes compiling go faster. (This is only a performance feature.) + #------------------------------------------------------------------------ + + if test -z "$no_pipe" -a -n "$GCC"; then + AC_MSG_CHECKING([if the compiler understands -pipe]) + OLDCC="$CC" + CC="$CC -pipe" + AC_TRY_COMPILE(,, AC_MSG_RESULT([yes]), CC="$OLDCC" + AC_MSG_RESULT([no])) + fi + + #-------------------------------------------------------------------- + # Common compiler flag setup + #-------------------------------------------------------------------- + + AC_C_BIGENDIAN + if test "${TEA_PLATFORM}" = "unix" ; then + TEA_TCL_LINK_LIBS + TEA_MISSING_POSIX_HEADERS + # Let the user call this, because if it triggers, they will + # need a compat/strtod.c that is correct. Users can also + # use Tcl_GetDouble(FromObj) instead. + #TEA_BUGGY_STRTOD + fi +]) + +#------------------------------------------------------------------------ +# TEA_MAKE_LIB -- +# +# Generate a line that can be used to build a shared/unshared library +# in a platform independent manner. +# +# Arguments: +# none +# +# Requires: +# +# Results: +# +# Defines the following vars: +# CFLAGS - Done late here to note disturb other AC macros +# MAKE_LIB - Command to execute to build the Tcl library; +# differs depending on whether or not Tcl is being +# compiled as a shared library. +# MAKE_SHARED_LIB Makefile rule for building a shared library +# MAKE_STATIC_LIB Makefile rule for building a static library +# MAKE_STUB_LIB Makefile rule for building a stub library +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_MAKE_LIB, [ + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then + MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\[$]@ \$(PKG_OBJECTS)" + MAKE_STUB_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_STUB_OBJECTS)" + else + MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}" + MAKE_STUB_LIB="\${STLIB_LD} \[$]@ \$(PKG_STUB_OBJECTS)" + fi + + if test "${SHARED_BUILD}" = "1" ; then + MAKE_LIB="${MAKE_SHARED_LIB} " + else + MAKE_LIB="${MAKE_STATIC_LIB} " + fi + + #-------------------------------------------------------------------- + # Shared libraries and static libraries have different names. + # Use the double eval to make sure any variables in the suffix is + # substituted. (@@@ Might not be necessary anymore) + #-------------------------------------------------------------------- + + if test "${TEA_PLATFORM}" = "windows" ; then + if test "${SHARED_BUILD}" = "1" ; then + # We force the unresolved linking of symbols that are really in + # the private libraries of Tcl and Tk. + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\"" + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\"" + fi + eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + else + eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + fi + # Some packages build there own stubs libraries + eval eval "PKG_STUB_LIB_FILE=${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + # These aren't needed on Windows (either MSVC or gcc) + RANLIB=: + RANLIB_STUB=: + else + RANLIB_STUB="${RANLIB}" + if test "${SHARED_BUILD}" = "1" ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}" + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}" + fi + eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + RANLIB=: + else + eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + fi + # Some packages build there own stubs libraries + eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + fi + + # These are escaped so that only CFLAGS is picked up at configure time. + # The other values will be substituted at make time. + CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}" + if test "${SHARED_BUILD}" = "1" ; then + CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}" + fi + + AC_SUBST(MAKE_LIB) + AC_SUBST(MAKE_SHARED_LIB) + AC_SUBST(MAKE_STATIC_LIB) + AC_SUBST(MAKE_STUB_LIB) + AC_SUBST(RANLIB_STUB) +]) + +#------------------------------------------------------------------------ +# TEA_LIB_SPEC -- +# +# Compute the name of an existing object library located in libdir +# from the given base name and produce the appropriate linker flags. +# +# Arguments: +# basename The base name of the library without version +# numbers, extensions, or "lib" prefixes. +# extra_dir Extra directory in which to search for the +# library. This location is used first, then +# $prefix/$exec-prefix, then some defaults. +# +# Requires: +# TEA_INIT and TEA_PREFIX must be called first. +# +# Results: +# +# Defines the following vars: +# ${basename}_LIB_NAME The computed library name. +# ${basename}_LIB_SPEC The computed linker flags. +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_LIB_SPEC, [ + AC_MSG_CHECKING([for $1 library]) + + # Look in exec-prefix for the library (defined by TEA_PREFIX). + + tea_lib_name_dir="${exec_prefix}/lib" + + # Or in a user-specified location. + + if test x"$2" != x ; then + tea_extra_lib_dir=$2 + else + tea_extra_lib_dir=NONE + fi + + for i in \ + `ls -dr ${tea_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr ${tea_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr ${tea_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr ${tea_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do + if test -f "$i" ; then + tea_lib_name_dir=`dirname $i` + $1_LIB_NAME=`basename $i` + $1_LIB_PATH_NAME=$i + break + fi + done + + if test "${TEA_PLATFORM}" = "windows"; then + $1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME} 2>/dev/null`\" + else + # Strip off the leading "lib" and trailing ".a" or ".so" + + tea_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'` + $1_LIB_SPEC="-L${tea_lib_name_dir} -l${tea_lib_name_lib}" + fi + + if test "x${$1_LIB_NAME}" = x ; then + AC_MSG_ERROR([not found]) + else + AC_MSG_RESULT([${$1_LIB_SPEC}]) + fi +]) + +#------------------------------------------------------------------------ +# TEA_PRIVATE_TCL_HEADERS -- +# +# Locate the private Tcl include files +# +# Arguments: +# +# Requires: +# TCL_SRC_DIR Assumes that TEA_LOAD_TCLCONFIG has +# already been called. +# +# Results: +# +# Substs the following vars: +# TCL_TOP_DIR_NATIVE +# TCL_GENERIC_DIR_NATIVE +# TCL_UNIX_DIR_NATIVE +# TCL_WIN_DIR_NATIVE +# TCL_BMAP_DIR_NATIVE +# TCL_TOOL_DIR_NATIVE +# TCL_PLATFORM_DIR_NATIVE +# TCL_BIN_DIR_NATIVE +# TCL_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PRIVATE_TCL_HEADERS, [ + AC_MSG_CHECKING([for Tcl private include files]) + + if test "${TEA_PLATFORM}" = "windows"; then + TCL_TOP_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}`\" + TCL_GENERIC_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/generic`\" + TCL_UNIX_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/unix`\" + TCL_WIN_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/win`\" + TCL_BMAP_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/bitmaps`\" + TCL_TOOL_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/tools`\" + TCL_COMPAT_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/compat`\" + TCL_PLATFORM_DIR_NATIVE=${TCL_WIN_DIR_NATIVE} + + TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}" + else + TCL_TOP_DIR_NATIVE='$(TCL_SRC_DIR)' + TCL_GENERIC_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/generic' + TCL_UNIX_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/unix' + TCL_WIN_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/win' + TCL_BMAP_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/bitmaps' + TCL_TOOL_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/tools' + TCL_COMPAT_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/compat' + TCL_PLATFORM_DIR_NATIVE=${TCL_UNIX_DIR_NATIVE} + + # substitute these in "relaxed" so that TCL_INCLUDES still works + # without requiring the other vars to be defined in the Makefile + eval "TCL_INCLUDES=\"-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}\"" + fi + + AC_SUBST(TCL_TOP_DIR_NATIVE) + AC_SUBST(TCL_GENERIC_DIR_NATIVE) + AC_SUBST(TCL_UNIX_DIR_NATIVE) + AC_SUBST(TCL_WIN_DIR_NATIVE) + AC_SUBST(TCL_BMAP_DIR_NATIVE) + AC_SUBST(TCL_TOOL_DIR_NATIVE) + AC_SUBST(TCL_PLATFORM_DIR_NATIVE) + + AC_SUBST(TCL_INCLUDES) + AC_MSG_RESULT([Using srcdir found in tclConfig.sh: ${TCL_SRC_DIR}]) +]) + +#------------------------------------------------------------------------ +# TEA_PUBLIC_TCL_HEADERS -- +# +# Locate the installed public Tcl header files +# +# Arguments: +# None. +# +# Requires: +# CYGPATH must be set +# +# Results: +# +# Adds a --with-tclinclude switch to configure. +# Result is cached. +# +# Substs the following vars: +# TCL_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PUBLIC_TCL_HEADERS, [ + AC_MSG_CHECKING([for Tcl public headers]) + + AC_ARG_WITH(tclinclude, [ --with-tclinclude directory containing the public Tcl header files], with_tclinclude=${withval}) + + AC_CACHE_VAL(ac_cv_c_tclh, [ + # Use the value from --with-tclinclude, if it was given + + if test x"${with_tclinclude}" != x ; then + if test -f "${with_tclinclude}/tcl.h" ; then + ac_cv_c_tclh=${with_tclinclude} + else + AC_MSG_ERROR([${with_tclinclude} directory does not contain tcl.h]) + fi + else + # Check order: pkg --prefix location, Tcl's --prefix location, + # directory of tclConfig.sh, and Tcl source directory. + # Looking in the source dir is not ideal, but OK. + + eval "temp_includedir=${includedir}" + list="`ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null` \ + `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + fi + for i in $list ; do + if test -f "$i/tcl.h" ; then + ac_cv_c_tclh=$i + break + fi + done + fi + ]) + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_tclh}" = x ; then + AC_MSG_ERROR([tcl.h not found. Please specify its location with --with-tclinclude]) + else + AC_MSG_RESULT([${ac_cv_c_tclh}]) + fi + + # Convert to a native path and substitute into the output files. + + INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}` + + TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + AC_SUBST(TCL_INCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_PRIVATE_TK_HEADERS -- +# +# Locate the private Tk include files +# +# Arguments: +# +# Requires: +# TK_SRC_DIR Assumes that TEA_LOAD_TKCONFIG has +# already been called. +# +# Results: +# +# Substs the following vars: +# TK_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PRIVATE_TK_HEADERS, [ + AC_MSG_CHECKING([for Tk private include files]) + + if test "${TEA_PLATFORM}" = "windows"; then + TK_TOP_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}`\" + TK_UNIX_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/unix`\" + TK_WIN_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/win`\" + TK_GENERIC_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/generic`\" + TK_XLIB_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/xlib`\" + TK_PLATFORM_DIR_NATIVE=${TK_WIN_DIR_NATIVE} + + TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE} -I${TK_XLIB_DIR_NATIVE}" + else + TK_TOP_DIR_NATIVE='${TK_SRC_DIR}' + TK_GENERIC_DIR_NATIVE='${TK_TOP_DIR_NATIVE}/generic' + TK_UNIX_DIR_NATIVE='${TK_TOP_DIR_NATIVE}/unix' + TK_WIN_DIR_NATIVE='${TK_TOP_DIR_NATIVE}/win' + TK_PLATFORM_DIR_NATIVE=${TK_UNIX_DIR_NATIVE} + + # substitute these in "relaxed" so that TK_INCLUDES still works + # without requiring the other vars to be defined in the Makefile + eval "TK_INCLUDES=\"-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}\"" + fi + + AC_SUBST(TK_TOP_DIR_NATIVE) + AC_SUBST(TK_UNIX_DIR_NATIVE) + AC_SUBST(TK_WIN_DIR_NATIVE) + AC_SUBST(TK_GENERIC_DIR_NATIVE) + AC_SUBST(TK_XLIB_DIR_NATIVE) + AC_SUBST(TK_PLATFORM_DIR_NATIVE) + + AC_SUBST(TK_INCLUDES) + AC_MSG_RESULT([Using srcdir found in tkConfig.sh: ${TK_SRC_DIR}]) +]) + +#------------------------------------------------------------------------ +# TEA_PUBLIC_TK_HEADERS -- +# +# Locate the installed public Tk header files +# +# Arguments: +# None. +# +# Requires: +# CYGPATH must be set +# +# Results: +# +# Adds a --with-tkinclude switch to configure. +# Result is cached. +# +# Substs the following vars: +# TK_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PUBLIC_TK_HEADERS, [ + AC_MSG_CHECKING([for Tk public headers]) + + AC_ARG_WITH(tkinclude, [ --with-tkinclude directory containing the public Tk header files.], with_tkinclude=${withval}) + + AC_CACHE_VAL(ac_cv_c_tkh, [ + # Use the value from --with-tkinclude, if it was given + + if test x"${with_tkinclude}" != x ; then + if test -f "${with_tkinclude}/tk.h" ; then + ac_cv_c_tkh=${with_tkinclude} + else + AC_MSG_ERROR([${with_tkinclude} directory does not contain tk.h]) + fi + else + # Check order: pkg --prefix location, Tcl's --prefix location, + # directory of tclConfig.sh, and Tcl source directory. + # Looking in the source dir is not ideal, but OK. + + eval "temp_includedir=${includedir}" + list="`ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TK_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null` \ + `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + fi + for i in $list ; do + if test -f "$i/tk.h" ; then + ac_cv_c_tkh=$i + break + fi + done + fi + ]) + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_tkh}" = x ; then + AC_MSG_ERROR([tk.h not found. Please specify its location with --with-tkinclude]) + else + AC_MSG_RESULT([${ac_cv_c_tkh}]) + fi + + # Convert to a native path and substitute into the output files. + + INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}` + + TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + AC_SUBST(TK_INCLUDES) + + if test "${TEA_PLATFORM}" = "windows" ; then + # On Windows, we need the X compat headers + AC_MSG_CHECKING([for X11 header files]) + if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then + INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`" + TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + AC_SUBST(TK_XINCLUDES) + fi + AC_MSG_RESULT([${INCLUDE_DIR_NATIVE}]) + fi +]) + +#------------------------------------------------------------------------ +# TEA_PROG_TCLSH +# Locate a tclsh shell in the following directories: +# ${TCL_BIN_DIR} ${TCL_BIN_DIR}/../bin +# ${exec_prefix}/bin ${prefix}/bin +# ${PATH} +# +# Arguments +# none +# +# Results +# Subst's the following values: +# TCLSH_PROG +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PROG_TCLSH, [ + # Allow the user to provide this setting in the env + if test "x${TCLSH_PROG}" = "x" ; then + AC_MSG_CHECKING([for tclsh]) + + AC_CACHE_VAL(ac_cv_path_tclsh, [ + search_path=`echo ${PATH} | sed -e 's/:/ /g'` + if test "${TEA_PLATFORM}" != "windows" -o \ + \( "$do64bit_ok" = "no" -a "$doWince" = "no" \) ; then + # Do not allow target tclsh in known cross-compile builds, + # as we need one we can run on this system + search_path="${TCL_BIN_DIR} ${TCL_BIN_DIR}/../bin ${exec_prefix}/bin ${prefix}/bin ${search_path}" + fi + for dir in $search_path ; do + for j in `ls -r $dir/tclsh[[8-9]]*${EXEEXT} 2> /dev/null` \ + `ls -r $dir/tclsh*${EXEEXT} 2> /dev/null` ; do + if test x"$ac_cv_path_tclsh" = x ; then + if test -f "$j" ; then + ac_cv_path_tclsh=$j + break + fi + fi + done + done + ]) + + if test -f "$ac_cv_path_tclsh" ; then + TCLSH_PROG=$ac_cv_path_tclsh + AC_MSG_RESULT([$TCLSH_PROG]) + else + AC_MSG_ERROR([No tclsh found in PATH: $search_path]) + fi + fi + AC_SUBST(TCLSH_PROG) +]) + +#------------------------------------------------------------------------ +# TEA_PROG_WISH +# Locate a wish shell in the following directories: +# ${TK_BIN_DIR} ${TK_BIN_DIR}/../bin +# ${TCL_BIN_DIR} ${TCL_BIN_DIR}/../bin +# ${exec_prefix}/bin ${prefix}/bin +# ${PATH} +# +# Arguments +# none +# +# Results +# Subst's the following values: +# WISH_PROG +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PROG_WISH, [ + # Allow the user to provide this setting in the env + if test "x${WISH_PROG}" = "x" ; then + AC_MSG_CHECKING([for wish]) + + AC_CACHE_VAL(ac_cv_path_wish, [ + search_path=`echo ${PATH} | sed -e 's/:/ /g'` + if test "${TEA_PLATFORM}" != "windows" -o \ + \( "$do64bit_ok" = "no" -a "$doWince" = "no" \) ; then + # Do not allow target wish in known cross-compile builds, + # as we need one we can run on this system + search_path="${TK_BIN_DIR} ${TK_BIN_DIR}/../bin ${TCL_BIN_DIR} ${TCL_BIN_DIR}/../bin ${exec_prefix}/bin ${prefix}/bin ${search_path}" + fi + for dir in $search_path ; do + for j in `ls -r $dir/wish[[8-9]]*${EXEEXT} 2> /dev/null` \ + `ls -r $dir/wish*${EXEEXT} 2> /dev/null` ; do + if test x"$ac_cv_path_wish" = x ; then + if test -f "$j" ; then + ac_cv_path_wish=$j + break + fi + fi + done + done + ]) + + if test -f "$ac_cv_path_wish" ; then + WISH_PROG=$ac_cv_path_wish + AC_MSG_RESULT([$WISH_PROG]) + else + AC_MSG_ERROR([No wish found in PATH: $search_path]) + fi + fi + AC_SUBST(WISH_PROG) +]) + +#------------------------------------------------------------------------ +# TEA_PATH_CONFIG -- +# +# Locate the ${1}Config.sh file and perform a sanity check on +# the ${1} compile flags. These are used by packages like +# [incr Tk] that load *Config.sh files from more than Tcl and Tk. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-$1=... +# +# Defines the following vars: +# $1_BIN_DIR Full path to the directory containing +# the $1Config.sh file +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PATH_CONFIG, [ + # + # Ok, lets find the $1 configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-$1 + # + + if test x"${no_$1}" = x ; then + # we reset no_$1 in case something fails here + no_$1=true + AC_ARG_WITH($1, [ --with-$1 directory containing $1 configuration ($1Config.sh)], with_$1config=${withval}) + AC_MSG_CHECKING([for $1 configuration]) + AC_CACHE_VAL(ac_cv_c_$1config,[ + + # First check to see if --with-$1 was specified. + if test x"${with_$1config}" != x ; then + case ${with_$1config} in + */$1Config.sh ) + if test -f ${with_$1config}; then + AC_MSG_WARN([--with-$1 argument should refer to directory containing $1Config.sh, not to $1Config.sh itself]) + with_$1config=`echo ${with_$1config} | sed 's!/$1Config\.sh$!!'` + fi;; + esac + if test -f "${with_$1config}/$1Config.sh" ; then + ac_cv_c_$1config=`(cd ${with_$1config}; pwd)` + else + AC_MSG_ERROR([${with_$1config} directory doesn't contain $1Config.sh]) + fi + fi + + # then check for a private $1 installation + if test x"${ac_cv_c_$1config}" = x ; then + for i in \ + ../$1 \ + `ls -dr ../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ../../$1 \ + `ls -dr ../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ../../../$1 \ + `ls -dr ../../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ../../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ${srcdir}/../$1 \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ; do + if test -f "$i/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i; pwd)` + break + fi + if test -f "$i/unix/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i/unix; pwd)` + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_$1config}" = x ; then + for i in `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + ; do + if test -f "$i/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i; pwd)` + break + fi + done + fi + ]) + + if test x"${ac_cv_c_$1config}" = x ; then + $1_BIN_DIR="# no $1 configs found" + AC_MSG_WARN("Cannot find $1 configuration definitions") + exit 0 + else + no_$1= + $1_BIN_DIR=${ac_cv_c_$1config} + AC_MSG_RESULT([found $$1_BIN_DIR/$1Config.sh]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_CONFIG -- +# +# Load the $1Config.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# $1_BIN_DIR +# +# Results: +# +# Subst the following vars: +# $1_SRC_DIR +# $1_LIB_FILE +# $1_LIB_SPEC +# +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_LOAD_CONFIG, [ + AC_MSG_CHECKING([for existence of ${$1_BIN_DIR}/$1Config.sh]) + + if test -f "${$1_BIN_DIR}/$1Config.sh" ; then + AC_MSG_RESULT([loading]) + . ${$1_BIN_DIR}/$1Config.sh + else + AC_MSG_RESULT([file not found]) + fi + + # + # If the $1_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable $1_LIB_SPEC will be set to the value + # of $1_BUILD_LIB_SPEC. An extension should make use of $1_LIB_SPEC + # instead of $1_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + # + + if test -f ${$1_BIN_DIR}/Makefile ; then + AC_MSG_WARN([Found Makefile - using build library specs for $1]) + $1_LIB_SPEC=${$1_BUILD_LIB_SPEC} + $1_STUB_LIB_SPEC=${$1_BUILD_STUB_LIB_SPEC} + $1_STUB_LIB_PATH=${$1_BUILD_STUB_LIB_PATH} + fi + + AC_SUBST($1_VERSION) + AC_SUBST($1_BIN_DIR) + AC_SUBST($1_SRC_DIR) + + AC_SUBST($1_LIB_FILE) + AC_SUBST($1_LIB_SPEC) + + AC_SUBST($1_STUB_LIB_FILE) + AC_SUBST($1_STUB_LIB_SPEC) + AC_SUBST($1_STUB_LIB_PATH) +]) + +#------------------------------------------------------------------------ +# TEA_PATH_CELIB -- +# +# Locate Keuchel's celib emulation layer for targeting Win/CE +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-celib=... +# +# Defines the following vars: +# CELIB_DIR Full path to the directory containing +# the include and platform lib files +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PATH_CELIB, [ + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-celib + + if test x"${no_celib}" = x ; then + # we reset no_celib in case something fails here + no_celib=true + AC_ARG_WITH(celib,[ --with-celib=DIR use Windows/CE support library from DIR], with_celibconfig=${withval}) + AC_MSG_CHECKING([for Windows/CE celib directory]) + AC_CACHE_VAL(ac_cv_c_celibconfig,[ + # First check to see if --with-celibconfig was specified. + if test x"${with_celibconfig}" != x ; then + if test -d "${with_celibconfig}/inc" ; then + ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)` + else + AC_MSG_ERROR([${with_celibconfig} directory doesn't contain inc directory]) + fi + fi + + # then check for a celib library + if test x"${ac_cv_c_celibconfig}" = x ; then + for i in \ + ../celib-palm-3.0 \ + ../celib \ + ../../celib-palm-3.0 \ + ../../celib \ + `ls -dr ../celib-*3.[[0-9]]* 2>/dev/null` \ + ${srcdir}/../celib-palm-3.0 \ + ${srcdir}/../celib \ + `ls -dr ${srcdir}/../celib-*3.[[0-9]]* 2>/dev/null` \ + ; do + if test -d "$i/inc" ; then + ac_cv_c_celibconfig=`(cd $i; pwd)` + break + fi + done + fi + ]) + if test x"${ac_cv_c_celibconfig}" = x ; then + AC_MSG_ERROR([Cannot find celib support library directory]) + else + no_celib= + CELIB_DIR=${ac_cv_c_celibconfig} + AC_MSG_RESULT([found $CELIB_DIR]) + TEA_PATH_NOSPACE(CELIB_DIR, ${ac_cv_c_celibconfig}) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_PATH_NOSPACE +# Ensure that the given path has no spaces. This is necessary for +# CC (and consitutuent vars that build it up) to work in the +# tortured autoconf environment. Currently only for Windows use. +# +# Arguments +# VAR - name of the variable to set +# PATH - path to ensure no spaces in +# +# Results +# Sets $VAR to short path of $PATH if it can be found. +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_NOSPACE], [ + if test "${TEA_PLATFORM}" = "windows" ; then + # we need TCLSH_PROG defined to get Windows short pathnames + AC_REQUIRE([TEA_PROG_TCLSH]) + + AC_MSG_CHECKING([short pathname for $1 ($2)]) + + shortpath= + case "$2" in + *\ *) + # Only do this if we need to. + shortpath=`echo "puts [[file attributes {$2} -shortname]] ; exit" | ${TCLSH_PROG} 2>/dev/null` + ;; + esac + if test "x${shortpath}" = "x" ; then + AC_MSG_RESULT([not changed]) + else + $1=$shortpath + AC_MSG_RESULT([${$1}]) + fi + fi +]) diff --git a/tests/all.tcl b/tests/all.tcl new file mode 100644 index 0000000..d711f38 --- /dev/null +++ b/tests/all.tcl @@ -0,0 +1,58 @@ +# all.tcl -- +# +# This file contains a top-level script to run all of the Tcl +# tests. Execute it by invoking "source all.test" when running tcltest +# in this directory. +# +# Copyright (c) 1998-2000 by Scriptics Corporation. +# All rights reserved. +# +# RCS: @(#) $Id$ + +if {[lsearch [namespace children] ::tcltest] == -1} { + package require tcltest + namespace import ::tcltest::* +} + +set ::tcltest::testSingleFile false +set ::tcltest::testsDirectory [file dir [info script]] + +# We need to ensure that the testsDirectory is absolute +::tcltest::normalizePath ::tcltest::testsDirectory + +set chan $::tcltest::outputChannel + +puts $chan "Tests running in interp: [info nameofexecutable]" +puts $chan "Tests running with pwd: [pwd]" +puts $chan "Tests running in working dir: $::tcltest::testsDirectory" +if {[llength $::tcltest::skip] > 0} { + puts $chan "Skipping tests that match: $::tcltest::skip" +} +if {[llength $::tcltest::match] > 0} { + puts $chan "Only running tests that match: $::tcltest::match" +} + +if {[llength $::tcltest::skipFiles] > 0} { + puts $chan "Skipping test files that match: $::tcltest::skipFiles" +} +if {[llength $::tcltest::matchFiles] > 0} { + puts $chan "Only sourcing test files that match: $::tcltest::matchFiles" +} + +set timeCmd {clock format [clock seconds]} +puts $chan "Tests began at [eval $timeCmd]" + +# source each of the specified tests +foreach file [lsort [::tcltest::getMatchingFiles]] { + set tail [file tail $file] + puts $chan $tail + if {[catch {source $file} msg]} { + puts $chan $msg + } +} + +# cleanup +puts $chan "\nTests ended at [eval $timeCmd]" +::tcltest::cleanupTests 1 +return + diff --git a/tests/filemonitor.test b/tests/filemonitor.test new file mode 100644 index 0000000..6395af0 --- /dev/null +++ b/tests/filemonitor.test @@ -0,0 +1,167 @@ +# filemonitor.test - Copyright (C) 2003 Pat Thoyts + +# ------------------------------------------------------------------------- +# Initialise the test package +# +if {[lsearch [namespace children] ::tcltest] == -1} { + package require tcltest 2 + namespace import ::tcltest::* +} + +package require Filemonitor +puts stderr " - filemonitor [package provide Filemonitor]" + +# ------------------------------------------------------------------------- +# Setup any constraints +# + +# ------------------------------------------------------------------------- +# Now the package specific tests.... +# ------------------------------------------------------------------------- + +set ::TMP [makeDirectory tmp[pid]] + +test fm-0.1 { + Check creation monitoring. +} -setup { + set ::FM {} + set ::FILE [file join $::TMP fm[pid]-0.1] + file delete -force $::FILE +} -body { + list [catch { + set monitor [filemonitor create create $::TMP {lappend ::FM SIGNALLED}] + set f [open $::FILE w] ; puts $f OK ; close $f + update + set ::FM + } msg] $msg +} -cleanup { + filemonitor delete $monitor + file delete -force $::FILE +} -result {0 SIGNALLED} + +test fm-0.2 { + Check file modification monitoring. +} -setup { + set ::FM {} + set ::FILE [file join $::TMP fm[pid]-0.2] + file delete -force $::FILE +} -body { + list [catch { + set monitor [filemonitor create modify $::TMP {lappend ::FM SIGNALLED}] + set f [open $::FILE w] ; puts $f OK ; close $f + update + set f [open $::FILE w] ; puts $f OK ; close $f + update + set ::FM + } msg] $msg +} -cleanup { + filemonitor delete $monitor + file delete -force $::FILE +} -result {0 {SIGNALLED SIGNALLED SIGNALLED}} + + +test fm-0.3 { + Check access monitoring. +} -setup { + set ::FM {} + set ::FILE [file join $::TMP fm[pid]-0.3] + file delete -force $::FILE +} -body { + list [catch { + set monitor [filemonitor create access $::TMP {lappend ::FM SIGNALLED}] + set f [open $::FILE w] ; puts $f OK ; close $f + set f [open $::FILE r] ; set d [read $f]; close $f + update + set ::FM + } msg] $msg +} -cleanup { + filemonitor delete $monitor + file delete -force $::FILE +} -result {0 SIGNALLED} + +test fm-0.4 { + Check delete monitoring. +} -setup { + set ::FM {} + set ::FILE [file join $::TMP fm[pid]-0.4] + file delete -force $::FILE +} -body { + list [catch { + set monitor [filemonitor create delete $::TMP {lappend ::FM SIGNALLED}] + set f [open $::FILE w] ; puts $f OK ; close $f + file delete $::FILE + update + set ::FM + } msg] $msg +} -cleanup { + filemonitor delete $monitor + file delete -force $::FILE +} -result {0 SIGNALLED} + +test fm-0.5 { + Check rename monitoring. +} -setup { + set ::FM {} + set ::FILE [file join $::TMP fm[pid]-0.5] + file delete -force $::FILE +} -body { + list [catch { + set monitor [filemonitor create rename $::TMP {lappend ::FM SIGNALLED}] + set f [open $::FILE w] ; puts $f OK ; close $f + file rename $::FILE ${::FILE}x + update + set ::FM + } msg] $msg +} -cleanup { + filemonitor delete $monitor + file delete -force $::FILE ${::FILE}x +} -result {0 SIGNALLED} + +test fm-0.6 { + Check attribute monitoring. +} -setup { + set ::FM {} + set ::FILE [file join $::TMP fm[pid]-0.6] + file delete -force $::FILE +} -body { + list [catch { + set monitor [filemonitor create attrib $::TMP {lappend ::FM SIGNALLED}] + set f [open $::FILE w] ; puts $f OK ; close $f + file attributes $::FILE -permissions 0640 + update + set ::FM + } msg] $msg +} -cleanup { + filemonitor delete $monitor + file delete -force $::FILE +} -result {0 SIGNALLED} + +test fm-1.0 { + Check command script error handling. +} -setup { + set ::FM {} + set ::FILE [file join $::TMP fm[pid]-1.0] + file delete -force $::FILE + catch {rename bgerror _bgerror} + proc bgerror {msg} {set ::FMERR $msg} +} -body { + list [catch { + set monitor [filemonitor create modify $::TMP {zxcset ::FM SIGNALLED}] + set f [open $::FILE w] ; puts $f OK ; close $f + update + set ::FMERR + } msg] $msg +} -cleanup { + file delete -force $::FILE + filemonitor delete $monitor + catch {rename _bgerror bgerror} +} -result {0 {invalid command name "zxcset"}} + +# ------------------------------------------------------------------------- + +::tcltest::cleanupTests +return + +# Local variables: +# mode: tcl +# End: diff --git a/unix/tclUnixFileMonitor.c b/unix/tclUnixFileMonitor.c new file mode 100644 index 0000000..b694f58 --- /dev/null +++ b/unix/tclUnixFileMonitor.c @@ -0,0 +1,382 @@ +/* tclUnixFileMonitor.c - + * Copyright (C) 2003 Pat Thoyts + * + * Unix platform specific parts of the file monitoring package. + * This file supports the linux dnotify notification system. + * + * ------------------------------------------------------------------------- + * See the file "license" for information on usage and redistribution + * of this file, and for a DISCLAIMER OF ALL WARRANTIES. + * ------------------------------------------------------------------------- + */ + +#if HAVE_F_NOTIFY + +#include "tclFileMonitor.h" + +#define __USE_GNU /* needed to get the required defines */ +#include + +#include +#include + +/* + * Platform specific monitor data + */ + +typedef struct TclDnotifyFileMonitor { + struct TclFileMonitor monitor; + int fd; /* the directory file handle */ + CONST char *path; /* the directory to be monitored */ + Tcl_AsyncHandler async; +} TclDnotifyFileMonitor; + +typedef struct ProcessList { + Tcl_Interp *interp; + FileMonitorPkg *pkgPtr; + struct ProcessList *nextPtr; + struct ProcessList *prevPtr; +} ProcessList; + +/* + * We need to maintain a process-global list of lists that we must + * search on receipt of a signal. There is one list per interp in + * this process + */ + +static ProcessList *processList; +TCL_DECLARE_MUTEX(dnotifyMutex) + +static Tcl_EventSetupProc SetupProc; +static Tcl_EventCheckProc CheckProc; +static Tcl_EventProc EventProc; +static Tcl_AsyncProc AsyncProc; + +static void SignalHandler(int signal, siginfo_t *siginfo, void *data); + +/* + * ---------------------------------------------------------------------- + * + * TclpFilemonitorInit -- + * + * Platform specific intialization. + * + * Results: + * Standard Tcl result code. + * + * ---------------------------------------------------------------------- + */ + +int +TclpFilemonitorInit(interp, pkgPtr) + Tcl_Interp *interp; + FileMonitorPkg *pkgPtr; +{ + struct sigaction action; + ProcessList *processPtr; + + /* + * Setup the action to be taken in this process for the SIGRTMIN + * signal. It won't matter if this is done more than once per + * process. + */ + + action.sa_handler = NULL; + action.sa_flags = SA_SIGINFO; + action.sa_sigaction = SignalHandler; + sigemptyset(&action.sa_mask); + sigaction(SIGRTMIN, &action, NULL); + + /* + * Add this interpreters package structure to a process global + * list. + */ + + processPtr = (ProcessList *)ckalloc(sizeof(ProcessList)); + processPtr->interp = interp; + processPtr->pkgPtr = pkgPtr; + processPtr->prevPtr = NULL; + processPtr->nextPtr = NULL; + + Tcl_MutexLock(&dnotifyMutex); + { + if (processList == NULL) + processList = processPtr; + else { + ProcessList *tmpPtr = processList; + while (tmpPtr->nextPtr != NULL) + tmpPtr = tmpPtr->nextPtr; + tmpPtr->nextPtr = processPtr; + processPtr->prevPtr = tmpPtr; + } + + Tcl_MutexUnlock(&dnotifyMutex); + } + + return TCL_OK; +} + +/* + * ---------------------------------------------------------------------- + * + * TclpFileMonitorCreateProc -- + * + * + * Results: + * A standard Tcl result code. + * + * Side Effects: + * + * + * ---------------------------------------------------------------------- + */ + +int +TclpFileMonitorCreateProc(clientData, interp, objc, objv) + ClientData clientData; + Tcl_Interp *interp; + int objc; + Tcl_Obj *CONST84 objv[]; +{ + enum { + MOD_ACCESS, MOD_MODIFY, MOD_CREATE, MOD_DELETE, MOD_RENAME, MOD_ATTRIB + }; + static CONST char *types[] = { + "access", "modify", "create", "delete", "rename", "attrib", NULL + }; + FileMonitorPkg *pkgPtr = (FileMonitorPkg *)clientData; + TclDnotifyFileMonitor *monitorPtr; + int r, type = 0, index, recurse = 0; + + if (objc < 5 || objc > 6) { + Tcl_WrongNumArgs(interp, 2, objv, "type path ?-recurse? script"); + return TCL_ERROR; + } + + if (objc == 6) { + if (!strcmp("-recurse", Tcl_GetString(objv[4])) == 0) { + Tcl_WrongNumArgs(interp, 2, objv, "type path ?recurse? script"); + return TCL_ERROR; + } + recurse = 1; + } + + r = Tcl_GetIndexFromObj(interp, objv[2], types, "type", 0, &index); + if (r == TCL_OK) { + switch (index) { + case MOD_ACCESS: type |= DN_ACCESS; break; + case MOD_MODIFY: type |= DN_MODIFY; break; + case MOD_CREATE: type |= DN_CREATE; break; + case MOD_DELETE: type |= DN_DELETE; break; + case MOD_RENAME: type |= DN_RENAME; break; + case MOD_ATTRIB: type |= DN_ATTRIB; break; + } + } + + /* + * setup the event source. + */ + + if (r == TCL_OK) { + + monitorPtr = (TclDnotifyFileMonitor *) + ckalloc(sizeof(TclDnotifyFileMonitor)); + monitorPtr->monitor.cmdPtr = Tcl_DuplicateObj(objv[objc - 1]); + Tcl_IncrRefCount(monitorPtr->monitor.cmdPtr); + monitorPtr->monitor.interp = interp; + sprintf(monitorPtr->monitor.name, "monitor%d", pkgPtr->id++); + + monitorPtr->path = (CONST char *)strdup(Tcl_GetString(objv[3])); + monitorPtr->fd = open(monitorPtr->path, O_RDONLY); + + fcntl(monitorPtr->fd, F_SETSIG, SIGRTMIN); + fcntl(monitorPtr->fd, F_NOTIFY, type | DN_MULTISHOT); + + monitorPtr->async = Tcl_AsyncCreate(AsyncProc, monitorPtr); + + /* + * Add this to the front of the list of monitors. + */ + + monitorPtr->monitor.nextPtr = pkgPtr->headPtr; + pkgPtr->headPtr = (TclFileMonitor *)monitorPtr; + + + /* + * Return a name to the script for use in delete and info + */ + + Tcl_SetStringObj(Tcl_GetObjResult(interp), + monitorPtr->monitor.name, -1); + } + + return r; +} + +/* + * ---------------------------------------------------------------------- + * + * TclpDeleteMonitor -- + * + * Release any platform specific resources and free the allocated + * storage. + * + * ---------------------------------------------------------------------- + */ + +int +TclpDeleteMonitor(interp, monitor) + Tcl_Interp *interp; + TclFileMonitor *monitor; +{ + TclDnotifyFileMonitor *monitorPtr = (TclDnotifyFileMonitor *)monitor; + + close(monitorPtr->fd); + free((void*)monitorPtr->path); + ckfree((char *)monitorPtr); + return TCL_OK; +} + +/* + * ---------------------------------------------------------------------- + * + * AsyncProc -- + * + * This function is queued to be run after a signal has been received + * and is executed when the interpreter is in a suitable state. + * + * Results: + * + * + * Side Effects: + * + * + * ---------------------------------------------------------------------- + */ + +static int +AsyncProc(clientData, interp, code) + ClientData clientData; + Tcl_Interp *interp; + int code; +{ + TclDnotifyFileMonitor *monitorPtr = (TclDnotifyFileMonitor *)clientData; + FileMonitorEvent *evPtr = NULL; + + /* + * Queue a Tcl event. We are not supposed to do too much in the async + * handler, so raise an event and do all the work then. + */ + + evPtr = (FileMonitorEvent *)ckalloc(sizeof(FileMonitorEvent)); + evPtr->header.proc = EventProc; + evPtr->header.nextPtr = NULL; + evPtr->interp = monitorPtr->monitor.interp; + Tcl_Preserve(evPtr->interp); + evPtr->cmdPtr = monitorPtr->monitor.cmdPtr; + Tcl_IncrRefCount(evPtr->cmdPtr); + + Tcl_QueueEvent((Tcl_Event *)evPtr, TCL_QUEUE_TAIL); + + return code; +} + +/* + * ---------------------------------------------------------------------- + * + * SignalHandler -- + * + * This is the bit of code called by the kernel dnotify system. + * We actually receive a signal and so mark this interp to get this + * handled as soon as practical. + * + * Results: + * None + * + * Side Effects: + * The interp queues an async mark. + * + * ---------------------------------------------------------------------- + */ + +static void +SignalHandler(int signal, siginfo_t *siginfo, void *data) +{ + ProcessList *iPtr; + + /* + * Find the FileMonitor structure that is appropriate for this filehandle + */ + + Tcl_MutexLock(&dnotifyMutex); + + for (iPtr = processList; iPtr != NULL; iPtr = iPtr->nextPtr) { + TclFileMonitor *tmpPtr = iPtr->pkgPtr->headPtr; + + for ( ; tmpPtr != NULL; tmpPtr = tmpPtr->nextPtr) { + TclDnotifyFileMonitor *dPtr = (TclDnotifyFileMonitor *)tmpPtr; + + if (siginfo->si_fd == dPtr->fd) { + Tcl_MutexUnlock(&dnotifyMutex); + Tcl_AsyncMark(dPtr->async); + return; + } + + } + } + Tcl_MutexUnlock(&dnotifyMutex); +} + +/* + * ---------------------------------------------------------------------- + * + * EventProc -- + * + * This is the Tcl event handler. We just evaluate the script + * that was provided when the monitor was created. + * + * Results: + * 1 if the event was handled. 0 is the flags indicate we should + * not process file events. + * + * Side Effects: + * Tcl script is evaluated. + * + * ---------------------------------------------------------------------- + */ + +static int +EventProc(Tcl_Event *eventPtr, int flags) +{ + FileMonitorEvent *evPtr = (FileMonitorEvent *)eventPtr; + + if (!(flags & TCL_FILE_EVENTS)) { + return 0; + } + + + /* + * Evaluate the command and handle any error. + */ + + BackgroundEvalObjEx(evPtr->interp, evPtr->cmdPtr, TCL_EVAL_GLOBAL); + + /* + * Clean up reference counts that were set when the event was queued + */ + + Tcl_DecrRefCount(evPtr->cmdPtr); + Tcl_Release((ClientData) evPtr->interp); + + return 1; /* 1 to indicate the event has been handled */ +} + +#endif /* HAVE_F_NOTIFY */ + +/* + * Local variables: + * mode: c + * c-indentation-style: tcltk + * tab-width: 8 + * End: + */ diff --git a/unix/tclUnixFileMonitorKQ.c b/unix/tclUnixFileMonitorKQ.c new file mode 100644 index 0000000..025076d --- /dev/null +++ b/unix/tclUnixFileMonitorKQ.c @@ -0,0 +1,309 @@ +/* tclUnixFileMonitorKQ.c - Copyright (C) 2003 Pat Thoyts + * + * Platform specific parts of the file monitoring package for systems + * implementing the kqueue subsystem. + * + * ------------------------------------------------------------------------- + * See the file "license" for information on usage and redistribution + * of this file, and for a DISCLAIMER OF ALL WARRANTIES. + * ------------------------------------------------------------------------- + */ + +#if HAVE_KQUEUE + +#include "tclFileMonitor.h" + +#include +#include +#include +#include + +/* + * Platform specific monitor data + */ + +typedef struct TclKQFileMonitor { + struct TclFileMonitor monitor; + int kqueue; /* kqueue handle for this monitor */ + int fd; /* the directory file handle */ + int flags; /* the set of filter flags for this monitor */ + CONST char *path; /* the directory to be monitored */ +} TclKQFileMonitor; + +static Tcl_EventProc EventProc; +static Tcl_FileProc FileProc; + +/* + * ---------------------------------------------------------------------- + * + * TclpFilemonitorInit -- + * + * Platform specific intialization. + * + * Results: + * Standard Tcl result code. + * + * ---------------------------------------------------------------------- + */ + +int +TclpFilemonitorInit(interp, pkgPtr) + Tcl_Interp *interp; + FileMonitorPkg *pkgPtr; +{ + pkgPtr->clientData = (ClientData)kqueue(); + if ((int)pkgPtr->clientData < 0) { + Tcl_SetResult(interp, "an error occurred calling kqueue(2)", TCL_STATIC); + return TCL_ERROR; + } + + Tcl_CreateFileHandler((int)pkgPtr->clientData, TCL_READABLE, + FileProc, (ClientData)pkgPtr); + + return TCL_OK; +} + +/* + * FIX ME: we need a Tcl_ExitHandler or something to remove this file + * handler and to close the kqueue. + */ + + +/* + * ---------------------------------------------------------------------- + * + * CreateProc -- + * + * + * Results: + * A standard Tcl result code. + * + * Side Effects: + * + * + * ---------------------------------------------------------------------- + */ + +int +TclpFileMonitorCreateProc(clientData, interp, objc, objv) + ClientData clientData; + Tcl_Interp *interp; + int objc; + Tcl_Obj *CONST84 objv[]; +{ + enum { + MOD_ACCESS, MOD_MODIFY, MOD_CREATE, MOD_DELETE, MOD_RENAME, MOD_ATTRIB, + MOD_SIZE, + }; + static CONST char *types[] = { + "access", "modify", "create", "delete", "rename", "attrib", + "size", NULL, + }; + FileMonitorPkg *pkgPtr = (FileMonitorPkg *)clientData; + TclKQFileMonitor *monitorPtr; + struct kevent kev; + struct timespec nullts = {0, 0}; + int r = TCL_OK, type = 0, index = 0, recurse = 0; + + if (objc < 5 || objc > 6) { + Tcl_WrongNumArgs(interp, 2, objv, "type path ?-recurse? script"); + return TCL_ERROR; + } + + if (objc == 6) { + if (!strcmp("-recurse", Tcl_GetString(objv[4])) == 0) { + Tcl_WrongNumArgs(interp, 2, objv, "type path ?recurse? script"); + return TCL_ERROR; + } + recurse = 1; + } + + r = Tcl_GetIndexFromObj(interp, objv[2], types, "type", 0, &index); + if (r == TCL_OK) { + switch (index) { + case MOD_MODIFY: type = NOTE_WRITE; break; + case MOD_CREATE: type = NOTE_LINK; break; /* FIX ME: verify */ + case MOD_DELETE: type = NOTE_DELETE; break; + case MOD_RENAME: type = NOTE_RENAME; break; + case MOD_ATTRIB: type = NOTE_ATTRIB; break; + case MOD_SIZE: type = NOTE_EXTEND; break; + default: + return TCL_ERROR; + } + } + + /* + * setup the event source. + */ + + if (r == TCL_OK) { + + monitorPtr = (TclKQFileMonitor *)ckalloc(sizeof(TclKQFileMonitor)); + monitorPtr->monitor.cmdPtr = Tcl_DuplicateObj(objv[objc - 1]); + Tcl_IncrRefCount(monitorPtr->monitor.cmdPtr); + monitorPtr->monitor.interp = interp; + sprintf(monitorPtr->monitor.name, "monitor%lu", pkgPtr->id++); + + monitorPtr->path = (CONST char *)strdup(Tcl_GetString(objv[3])); + monitorPtr->fd = open(monitorPtr->path, O_RDONLY); + + monitorPtr->flags = type; + monitorPtr->kqueue = (int)pkgPtr->clientData; + + /* + * Set the kqueue events that we are interested in + */ + + EV_SET(&kev, monitorPtr->fd, EVFILT_VNODE, + EV_ADD | EV_ENABLE | EV_CLEAR, + monitorPtr->flags, 0, NULL); + kevent(monitorPtr->kqueue, &kev, 1, NULL, 0, &nullts); + + /* + * Add this to the front of the list of monitors. + */ + + monitorPtr->monitor.nextPtr = pkgPtr->headPtr; + pkgPtr->headPtr = (TclFileMonitor *)monitorPtr; + + + /* + * Return a name to the script for use in delete and info + */ + + Tcl_SetStringObj(Tcl_GetObjResult(interp), + monitorPtr->monitor.name, -1); + } + + return r; +} + +/* + * ---------------------------------------------------------------------- + * + * TclpDeleteMonitor -- + * + * Release any platform specific resources and free the allocated + * storage. + * + * ---------------------------------------------------------------------- + */ + +int +TclpDeleteMonitor(interp, monitor) + Tcl_Interp *interp; + TclFileMonitor *monitor; +{ + TclKQFileMonitor *monitorPtr = (TclKQFileMonitor *)monitor; + struct kevent kev; + struct timespec nullts = {0, 0}; + + EV_SET(&kev, monitorPtr->fd, EVFILT_VNODE, + EV_DELETE, + monitorPtr->flags, 0, NULL); + kevent(monitorPtr->kqueue, &kev, 1, NULL, 0, &nullts); + + close(monitorPtr->fd); + free((void*)monitorPtr->path); + ckfree((char *)monitorPtr); + return TCL_OK; +} + +/* + * ---------------------------------------------------------------------- + * + * FileProc -- + * + * This is the Tcl file event handler. + * + * Results: + * none + * + * Side Effects: + * The current kevent will be removed from the kqueue and + * a Tcl event raised. + * + * ---------------------------------------------------------------------- + */ + +static void +FileProc(ClientData clientData, int mask) +{ + TclKQFileMonitor * monitorPtr = (TclKQFileMonitor *)clientData; + FileMonitorEvent *evPtr; + struct kevent kev; + struct timespec nullts = {0, 0}; + int nevents; + + EV_SET(&kev, monitorPtr->fd, EVFILT_VNODE, + 0, monitorPtr->flags, 0, NULL); + nevents = kevent(monitorPtr->kqueue, NULL, 0, &kev, 1, NULL); + fprintf(stderr, "FileProc '%d'\n", nevents); + if (nevents > 0) { + + evPtr = (FileMonitorEvent *)ckalloc(sizeof(FileMonitorEvent)); + evPtr->header.proc = EventProc; + evPtr->header.nextPtr = NULL; + evPtr->interp = monitorPtr->monitor.interp; + Tcl_Preserve(evPtr->interp); + evPtr->cmdPtr = monitorPtr->monitor.cmdPtr; + Tcl_IncrRefCount(evPtr->cmdPtr); + + Tcl_QueueEvent((Tcl_Event *)evPtr, TCL_QUEUE_TAIL); + } + + return; +} + +/* + * ---------------------------------------------------------------------- + * + * EventProc -- + * + * This is the Tcl event handler. We just evaluate the script + * that was provided when the monitor was created. + * + * Results: + * 1 if the event was handled. 0 is the flags indicate we should + * not process file events. + * + * Side Effects: + * Tcl script is evaluated. + * + * ---------------------------------------------------------------------- + */ + +static int +EventProc(Tcl_Event *eventPtr, int flags) +{ + FileMonitorEvent *evPtr = (FileMonitorEvent *)eventPtr; + + if (!(flags & TCL_FILE_EVENTS)) { + return 0; + } + + /* + * Evaluate the command and handle any error. + */ + + BackgroundEvalObjEx(evPtr->interp, evPtr->cmdPtr, TCL_EVAL_GLOBAL); + + /* + * Clean up reference counts that were set when the event was queued + */ + + Tcl_DecrRefCount(evPtr->cmdPtr); + Tcl_Release(evPtr->interp); + + return 1; /* 1 to indicate the event has been handled */ +} + +#endif /* HAVE_KQUEUE */ + +/* + * Local variables: + * mode: c + * c-indentation-style: tcltk + * tab-width: 8 + * End: + */ diff --git a/win/Filemonitor.dsp b/win/Filemonitor.dsp new file mode 100644 index 0000000..5120737 --- /dev/null +++ b/win/Filemonitor.dsp @@ -0,0 +1,101 @@ +# Microsoft Developer Studio Project File - Name="Filemonitor" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** DO NOT EDIT ** + +# TARGTYPE "Win32 (x86) External Target" 0x0106 + +CFG=Filemonitor - Win32 Debug +!MESSAGE This is not a valid makefile. To build this project using NMAKE, +!MESSAGE use the Export Makefile command and run +!MESSAGE +!MESSAGE NMAKE /f "Filemonitor.mak". +!MESSAGE +!MESSAGE You can specify a configuration when running NMAKE +!MESSAGE by defining the macro CFG on the command line. For example: +!MESSAGE +!MESSAGE NMAKE /f "Filemonitor.mak" CFG="Filemonitor - Win32 Debug" +!MESSAGE +!MESSAGE Possible choices for configuration are: +!MESSAGE +!MESSAGE "Filemonitor - Win32 Release" (based on "Win32 (x86) External Target") +!MESSAGE "Filemonitor - Win32 Debug" (based on "Win32 (x86) External Target") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" + +!IF "$(CFG)" == "Filemonitor - Win32 Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "Filemonitor___Win32_Release" +# PROP BASE Intermediate_Dir "Filemonitor___Win32_Release" +# PROP BASE Cmd_Line "NMAKE /f Filemonitor.mak" +# PROP BASE Rebuild_Opt "/a" +# PROP BASE Target_File "Filemonitor.exe" +# PROP BASE Bsc_Name "Filemonitor.bsc" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "Filemonitor___Win32_Release" +# PROP Intermediate_Dir "Filemonitor___Win32_Release" +# PROP Cmd_Line "nmake -f Makefile.vc TCLDIR=c:\opt\tcl INSTALLDIR=c:\opt\tcl OPTS=none" +# PROP Rebuild_Opt "" +# PROP Target_File "Release/filemonitor02.dll" +# PROP Bsc_Name "" +# PROP Target_Dir "" + +!ELSEIF "$(CFG)" == "Filemonitor - Win32 Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "Filemonitor___Win32_Debug" +# PROP BASE Intermediate_Dir "Filemonitor___Win32_Debug" +# PROP BASE Cmd_Line "NMAKE /f Filemonitor.mak" +# PROP BASE Rebuild_Opt "/a" +# PROP BASE Target_File "Filemonitor.exe" +# PROP BASE Bsc_Name "Filemonitor.bsc" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "Filemonitor___Win32_Debug" +# PROP Intermediate_Dir "Filemonitor___Win32_Debug" +# PROP Cmd_Line "nmake -f Makefile.vc TCLDIR=c:\opt\tcl INSTALLDIR=c:\opt\tcl OPTS=symbols" +# PROP Rebuild_Opt "" +# PROP Target_File "Debug/filemonitor02g.dll" +# PROP Bsc_Name "" +# PROP Target_Dir "" + +!ENDIF + +# Begin Target + +# Name "Filemonitor - Win32 Release" +# Name "Filemonitor - Win32 Debug" + +!IF "$(CFG)" == "Filemonitor - Win32 Release" + +!ELSEIF "$(CFG)" == "Filemonitor - Win32 Debug" + +!ENDIF + +# Begin Group "Source Files" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat" +# Begin Source File + +SOURCE=.\filemonitor.c +# End Source File +# End Group +# Begin Group "Header Files" + +# PROP Default_Filter "h;hpp;hxx;hm;inl" +# End Group +# Begin Group "Resource Files" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/win/Filemonitor.rc b/win/Filemonitor.rc new file mode 100644 index 0000000..fa036f9 --- /dev/null +++ b/win/Filemonitor.rc @@ -0,0 +1,45 @@ +/* Filemonitor.rc - + * + * The actual version is maintained in the Makefile + * + * THERE IS NO REASON TO MODIFY THIS FILE + */ + +#include + +VS_VERSION_INFO VERSIONINFO + FILEVERSION COMMAVERSION + PRODUCTVERSION COMMAVERSION + FILEFLAGSMASK 0x3fL +#ifdef DEBUG + FILEFLAGS VS_FF_DEBUG +#else + FILEFLAGS 0x0L +#endif + FILEOS VOS__WINDOWS32 + FILETYPE VFT_DLL + FILESUBTYPE 0x0L +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904b0" + BEGIN + VALUE "FileDescription", "File and directory monitor for Tcl\0" + VALUE "OriginalFilename", "filemonitor" VERSION ".dll\0" + VALUE "CompanyName", "Pat Thoyts\0" + VALUE "FileVersion", DOTVERSION "\0" + VALUE "LegalCopyright", "Copyright \251 2003 Pat Thoyts \0" + VALUE "ProductName", "Filemonitor\0" + VALUE "ProductVersion", DOTVERSION "\0" +#ifdef PROFILE + VALUE "SpecialBuild", "Profiling\0" +#else + VALUE "SpecialBuild", "\0" +#endif + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x409, 1200 + END +END diff --git a/win/makefile.vc b/win/makefile.vc new file mode 100644 index 0000000..88d5449 --- /dev/null +++ b/win/makefile.vc @@ -0,0 +1,420 @@ +# makefile.vc -- -*- Makefile -*- +# +# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+) +# +# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to +# make it suitable as a general package makefile. Look for the word EDIT +# which marks sections that may need modification. As a minumum you will +# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values +# relevant to your package. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# Copyright (c) 1995-1996 Sun Microsystems, Inc. +# Copyright (c) 1998-2000 Ajuba Solutions. +# Copyright (c) 2001 ActiveState Corporation. +# Copyright (c) 2001-2002 David Gravereaux. +# Copyright (c) 2003 Pat Thoyts +# +#------------------------------------------------------------------------- +# RCS: @(#)$Id$ +#------------------------------------------------------------------------- + +!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCToolkitInstallDir) +MSG = ^ +You will need to run vcvars32.bat from Developer Studio, first, to setup^ +the environment. Jump to this line to read the new instructions. +!error $(MSG) +!endif + +#------------------------------------------------------------------------------ +# HOW TO USE this makefile: +# +# 1) It is now necessary to have %MSVCDir% set in the environment. This is +# used as a check to see if vcvars32.bat had been run prior to running +# nmake or during the installation of Microsoft Visual C++, MSVCDir had +# been set globally and the PATH adjusted. Either way is valid. +# +# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin +# directory to setup the proper environment, if needed, for your current +# setup. This is a needed bootstrap requirement and allows the swapping of +# different environments to be easier. +# +# 2) To use the Platform SDK (not expressly needed), run setenv.bat after +# vcvars32.bat according to the instructions for it. This can also turn on +# the 64-bit compiler, if your SDK has it. +# +# 3) Targets are: +# all -- Builds everything. +# -- Builds the project (eg: nmake sample) +# test -- Builds and runs the test suite. +# install -- Installs the built binaries and libraries to $(INSTALLDIR) +# in an appropriate subdirectory. +# clean/realclean/distclean -- varying levels of cleaning. +# +# 4) Macros usable on the commandline: +# +# INSTALLDIR= +# Sets where to install Tcl from the built binaries. +# C:\Progra~1\Tcl is assumed when not specified. +# +# OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none +# Sets special options for the core. The default is for none. +# Any combination of the above may be used (comma separated). +# 'none' will over-ride everything to nothing. +# +# static = Builds a static library of the core instead of a +# dll. The shell will be static (and large), as well. +# msvcrt = Effects the static option only to switch it from +# using libcmt(d) as the C runtime [by default] to +# msvcrt(d). This is useful for static embedding +# support. +# staticpkg = Effects the static option only to switch +# tclshXX.exe to have the dde and reg extension linked +# inside it. +# threads = Turns on full multithreading support. +# thrdalloc = Use the thread allocator (shared global free pool). +# symbols = Adds symbols for step debugging. +# profile = Adds profiling hooks. Map file is assumed. +# loimpact = Adds a flag for how NT treats the heap to keep memory +# in use, low. This is said to impact alloc performance. +# +# STATS=memdbg,compdbg,none +# Sets optional memory and bytecode compiler debugging code added +# to the core. The default is for none. Any combination of the +# above may be used (comma separated). 'none' will over-ride +# everything to nothing. +# +# memdbg = Enables the debugging memory allocator. +# compdbg = Enables byte compilation logging. +# +# MACHINE=(IX86|IA64|ALPHA) +# Set the machine type used for the compiler, linker, and +# resource compiler. This hook is needed to tell the tools +# when alternate platforms are requested. IX86 is the default +# when not specified. +# +# TMP_DIR= +# OUT_DIR= +# Hooks to allow the intermediate and output directories to be +# changed. $(OUT_DIR) is assumed to be +# $(BINROOT)\(Release|Debug) based on if symbols are requested. +# $(TMP_DIR) will de $(OUT_DIR)\ by default. +# +# TESTPAT= +# Reads the tests requested to be run from this file. +# +# CFG_ENCODING=encoding +# name of encoding for configuration information. Defaults +# to cp1252 +# +# 5) Examples: +# +# Basic syntax of calling nmake looks like this: +# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]] +# +# Standard (no frills) +# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat +# Setting environment for using Microsoft Visual C++ tools. +# c:\tcl_src\win\>nmake -f makefile.vc all +# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl +# +# Building for Win64 +# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat +# Setting environment for using Microsoft Visual C++ tools. +# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL +# Targeting Windows pre64 RETAIL +# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64 +# +#------------------------------------------------------------------------------ +#============================================================================== +############################################################################### +#------------------------------------------------------------------------------ + +!if !exist("makefile.vc") +MSG = ^ +You must run this makefile only from the directory it is in.^ +Please `cd` to its location first. +!error $(MSG) +!endif + +#------------------------------------------------------------------------- +# Project specific information (EDIT) +# +# You should edit this with the name and version of your project. This +# information is used to generate the name of the package library and +# it's install location. +# +# For example, this extension is going to build filemonitor06.dll and +# would install it into $(INSTALLDIR)\filemonitor06 +# +# You need to specify the object files that need to be linked into your +# binary here. +# +#------------------------------------------------------------------------- + +PROJECT = filemonitor +!include "rules.vc" + +DOTVERSION = 0.6 +VERSION = $(DOTVERSION:.=) +STUBPREFIX = $(PROJECT)stub + +DLLOBJS = \ + $(TMP_DIR)\tclFileMonitor.obj \ + $(TMP_DIR)\tclWinFileMonitor.obj \ + $(TMP_DIR)\Filemonitor.res + +#------------------------------------------------------------------------- +# Target names and paths ( shouldn't need changing ) +#------------------------------------------------------------------------- + +BINROOT = . +ROOT = .. + +PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib +PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT) +PRJLIB = $(OUT_DIR)\$(PRJLIBNAME) + +PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib +PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME) + +### Make sure we use backslash only. +PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION) +LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR) +BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR) +DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR) +SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR) +DEMO_INSTALL_DIR = $(PRJ_INSTALL_DIR) +INCLUDE_INSTALL_DIR = $(_TCLDIR)\include + +### The following paths CANNOT have spaces in them. +GENERICDIR = $(ROOT)\generic +WINDIR = $(ROOT)\win +LIBDIR = $(ROOT)\library +DOCDIR = $(ROOT)\doc +TOOLSDIR = $(ROOT)\tools +COMPATDIR = $(ROOT)\compat + +#--------------------------------------------------------------------- +# Compile flags +#--------------------------------------------------------------------- + +!if !$(DEBUG) +!if $(OPTIMIZING) +### This cranks the optimization level to maximize speed +cdebug = -O2 -Op -Gs +!else +cdebug = +!endif +!else if "$(MACHINE)" == "IA64" +### Warnings are too many, can't support warnings into errors. +cdebug = -Z7 -Od -GZ +!else +cdebug = -Z7 -Od -GZ -WX +!endif + +### Declarations common to all compiler options +cflags = -nologo -c -W3 -YX -Fp$(TMP_DIR)^\ + +!if $(PENT_0F_ERRATA) +cflags = $(cflags) -QI0f +!endif + +!if $(ITAN_B_ERRATA) +cflags = $(cflags) -QIA64_Bx +!endif + +!if $(MSVCRT) +!if $(DEBUG) +crt = -MDd +!else +crt = -MD +!endif +!else +!if $(DEBUG) +crt = -MTd +!else +crt = -MT +!endif +!endif + +INCLUDES = $(TCL_INCLUDES) $(TK_INCLUDES) \ + -I"$(WINDIR)" -I"$(GENERICDIR)" +BASE_CFLAGS = $(cflags) $(cdebug) $(crt) $(INCLUDES) +CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE +TCL_CFLAGS = -DUSE_TCL_STUBS -DPACKAGE_NAME="$(PROJECT)" \ + -DPACKAGE_VERSION="\"$(DOTVERSION)\"" \ + $(BASE_CFLAGS) $(OPTDEFINES) + +#--------------------------------------------------------------------- +# Link flags +#--------------------------------------------------------------------- + +!if $(DEBUG) +ldebug = -debug:full -debugtype:cv +!else +ldebug = -release -opt:ref -opt:icf,3 +!endif + +### Declarations common to all linker options +lflags = -nologo -machine:$(MACHINE) $(ldebug) + +!if $(PROFILE) +lflags = $(lflags) -profile +!endif + +!if $(ALIGN98_HACK) && !$(STATIC_BUILD) +### Align sections for PE size savings. +lflags = $(lflags) -opt:nowin98 +!else if !$(ALIGN98_HACK) && $(STATIC_BUILD) +### Align sections for speed in loading by choosing the virtual page size. +lflags = $(lflags) -align:4096 +!endif + +!if $(LOIMPACT) +lflags = $(lflags) -ws:aggressive +!endif + +dlllflags = $(lflags) -dll +conlflags = $(lflags) -subsystem:console +guilflags = $(lflags) -subsystem:windows +baselibs = $(TCLSTUBLIB) + +#--------------------------------------------------------------------- +# TclTest flags +#--------------------------------------------------------------------- + +!IF "$(TESTPAT)" != "" +TESTFLAGS = -file $(TESTPAT) +!ENDIF + +#--------------------------------------------------------------------- +# Project specific targets (EDIT) +#--------------------------------------------------------------------- + +all: setup $(PROJECT) +$(PROJECT): setup $(PRJLIB) +install: install-binaries install-libraries install-docs + + +# Tests need to ensure we load the right dll file we +# have to handle the output differently on Win9x. +# +!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE" +test: setup $(PROJECT) + $(TCLSH) << +load $(PRJLIB:\=/) +cd "$(ROOT)/tests" +set argv "$(TESTFLAGS)" +source all.tcl +<< +!else +test: setup $(PROJECT) + echo Please wait while the test results are collected + $(TCLSH) << >tests.log +load $(PRJLIB:\=/) +cd "$(ROOT)/tests" +set argv "$(TESTFLAGS)" +source all.tcl +<< + type tests.log | more +!endif + +setup: + @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) + @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) + +$(PRJLIB): $(DLLOBJS) + $(link32) $(dlllflags) -out:$@ $(baselibs) @<< +$** +<< + -@del $*.exp + +$(PRJSTUBLIB): $(PRJSTUBOBJS) + $(lib32) -nologo -out:$@ $(PRJSTUBOBJS) + +#--------------------------------------------------------------------- +# Implicit rules +#--------------------------------------------------------------------- + +.c{$(TMP_DIR)}.obj:: + $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< +$< +<< + +{$(WINDIR)}.c{$(TMP_DIR)}.obj:: + $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< +$< +<< + +{$(GENERICDIR)}.c{$(TMP_DIR)}.obj:: + $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< +$< +<< + +{$(COMPATDIR)}.c{$(TMP_DIR)}.obj:: + $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< +$< +<< + +{$(WINDIR)}.rc{$(TMP_DIR)}.res: + $(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \ + -DCOMMAVERSION=$(DOTVERSION:.=,),0 \ + -DDOTVERSION=\"$(DOTVERSION)\" \ + -DVERSION=\"$(VERSION)$(SUFX)\" \ +!if $(DEBUG) + -d DEBUG \ +!endif +!if $(TCL_THREADS) + -d TCL_THREADS \ +!endif +!if $(STATIC_BUILD) + -d STATIC_BUILD \ +!endif + $< + +.SUFFIXES: +.SUFFIXES:.c .rc + +#--------------------------------------------------------------------- +# Installation. (EDIT) +# +# You may need to modify this section to reflect the final distribution +# of your files and possibly to generate documentation. +# +#--------------------------------------------------------------------- + +install-binaries: + @echo Installing binaries to '$(SCRIPT_INSTALL_DIR)' + @if not exist $(SCRIPT_INSTALL_DIR)\nul mkdir "$(SCRIPT_INSTALL_DIR)" + @$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL + +install-libraries: + @echo Installing to '$(SCRIPT_INSTALL_DIR)' + @if exist $(LIBDIR)\nul $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)" + @type << >"$(SCRIPT_INSTALL_DIR)\pkgIndex.tcl" +if {[info exists ::tcl_platform(debug)]} { + package ifneeded $(PROJECT) $(DOTVERSION) [list load [file join $$dir $(PROJECT)$(VERSION)g.$(EXT)]] +} else { + package ifneeded $(PROJECT) $(DOTVERSION) [list load [file join $$dir $(PROJECT)$(VERSION).$(EXT)]] +} +<< + +install-docs: + +#--------------------------------------------------------------------- +# Clean up +#--------------------------------------------------------------------- + +clean: + @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR) + @if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc + +realclean: clean + @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR) + +distclean: realclean + @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe + @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj diff --git a/win/nmakehlp.c b/win/nmakehlp.c new file mode 100644 index 0000000..30f81bf --- /dev/null +++ b/win/nmakehlp.c @@ -0,0 +1,355 @@ +/* ---------------------------------------------------------------------------- + * nmakehlp.c -- + * + * This is used to fix limitations within nmake and the environment. + * + * Copyright (c) 2002 by David Gravereaux. + * Copyright (c) 2003 by Patrick Thoyts + * + * See the file "license.terms" for information on usage and redistribution + * of this file, and for a DISCLAIMER OF ALL WARRANTIES. + * + * ---------------------------------------------------------------------------- + * RCS: @(#) $Id$ + * ---------------------------------------------------------------------------- + */ +#include +#include +#pragma comment (lib, "user32.lib") +#pragma comment (lib, "kernel32.lib") + +/* protos */ +int CheckForCompilerFeature (const char *option); +int CheckForLinkerFeature (const char *option); +int IsIn (const char *string, const char *substring); +DWORD WINAPI ReadFromPipe (LPVOID args); +int GetVersionFromHeader(const char *tclh, const char *tkh); + +/* globals */ +typedef struct { + HANDLE pipe; + char buffer[1000]; +} pipeinfo; + +pipeinfo Out = {INVALID_HANDLE_VALUE, '\0'}; +pipeinfo Err = {INVALID_HANDLE_VALUE, '\0'}; + + + +/* exitcodes: 0 == no, 1 == yes, 2 == error */ +int +main (int argc, char *argv[]) +{ + char msg[300]; + DWORD dwWritten; + int chars; + + if (argc > 1 && *argv[1] == '-') { + switch (*(argv[1]+1)) { + case 'c': + if (argc != 3) { + chars = wsprintf(msg, "usage: %s -c \n" + "Tests for whether cl.exe supports an option\n" + "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]); + WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL); + return 2; + } + return CheckForCompilerFeature(argv[2]); + case 'l': + if (argc != 3) { + chars = wsprintf(msg, "usage: %s -l \n" + "Tests for whether link.exe supports an option\n" + "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]); + WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL); + return 2; + } + return CheckForLinkerFeature(argv[2]); + case 'f': + if (argc == 2) { + chars = wsprintf(msg, "usage: %s -f \n" + "Find a substring within another\n" + "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]); + WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL); + return 2; + } else if (argc == 3) { + /* if the string is blank, there is no match */ + return 0; + } else { + return IsIn(argv[2], argv[3]); + } + case 'v': + if (argc != 4) { + chars = wsprintf(msg, "usage: %s -v \n" + "Search for versions from the tcl and tk headers.", + argv[0]); + WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL); + return 0; + } + return GetVersionFromHeader(argv[2], argv[3]); + } + } + chars = wsprintf(msg, "usage: %s -c|-l|-f ...\n" + "This is a little helper app to equalize shell differences between WinNT and\n" + "Win9x and get nmake.exe to accomplish its job.\n", + argv[0]); + WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL); + return 2; +} + +int +CheckForCompilerFeature (const char *option) +{ + STARTUPINFO si; + PROCESS_INFORMATION pi; + SECURITY_ATTRIBUTES sa; + DWORD threadID; + char msg[300]; + BOOL ok; + HANDLE hProcess, h, pipeThreads[2]; + char cmdline[100]; + + hProcess = GetCurrentProcess(); + + ZeroMemory(&pi, sizeof(PROCESS_INFORMATION)); + ZeroMemory(&si, sizeof(STARTUPINFO)); + si.cb = sizeof(STARTUPINFO); + si.dwFlags = STARTF_USESTDHANDLES; + si.hStdInput = INVALID_HANDLE_VALUE; + + ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES)); + sa.nLength = sizeof(SECURITY_ATTRIBUTES); + sa.lpSecurityDescriptor = NULL; + sa.bInheritHandle = FALSE; + + /* create a non-inheritible pipe. */ + CreatePipe(&Out.pipe, &h, &sa, 0); + + /* dupe the write side, make it inheritible, and close the original. */ + DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, + 0, TRUE, DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE); + + /* Same as above, but for the error side. */ + CreatePipe(&Err.pipe, &h, &sa, 0); + DuplicateHandle(hProcess, h, hProcess, &si.hStdError, + 0, TRUE, DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE); + + /* base command line */ + strcpy(cmdline, "cl.exe -nologo -c -TC -Fdtemp "); + /* append our option for testing */ + strcat(cmdline, option); + /* filename to compile, which exists, but is nothing and empty. */ + strcat(cmdline, " nul"); + + ok = CreateProcess( + NULL, /* Module name. */ + cmdline, /* Command line. */ + NULL, /* Process handle not inheritable. */ + NULL, /* Thread handle not inheritable. */ + TRUE, /* yes, inherit handles. */ + DETACHED_PROCESS, /* No console for you. */ + NULL, /* Use parent's environment block. */ + NULL, /* Use parent's starting directory. */ + &si, /* Pointer to STARTUPINFO structure. */ + &pi); /* Pointer to PROCESS_INFORMATION structure. */ + + if (!ok) { + DWORD err = GetLastError(); + int chars = wsprintf(msg, "Tried to launch: \"%s\", but got error [%u]: ", cmdline, err); + + FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM | FORMAT_MESSAGE_IGNORE_INSERTS | + FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID) &msg[chars], + (300-chars), 0); + WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, strlen(msg), &err, NULL); + return 2; + } + + /* close our references to the write handles that have now been inherited. */ + CloseHandle(si.hStdOutput); + CloseHandle(si.hStdError); + + WaitForInputIdle(pi.hProcess, 5000); + CloseHandle(pi.hThread); + + /* start the pipe reader threads. */ + pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID); + pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID); + + /* block waiting for the process to end. */ + WaitForSingleObject(pi.hProcess, INFINITE); + CloseHandle(pi.hProcess); + + /* clean up temporary files before returning */ + DeleteFile("temp.idb"); + DeleteFile("temp.pdb"); + + /* wait for our pipe to get done reading, should it be a little slow. */ + WaitForMultipleObjects(2, pipeThreads, TRUE, 500); + CloseHandle(pipeThreads[0]); + CloseHandle(pipeThreads[1]); + + /* look for the commandline warning code in both streams. */ + return !(strstr(Out.buffer, "D4002") != NULL || strstr(Err.buffer, "D4002") != NULL); +} + +int +CheckForLinkerFeature (const char *option) +{ + STARTUPINFO si; + PROCESS_INFORMATION pi; + SECURITY_ATTRIBUTES sa; + DWORD threadID; + char msg[300]; + BOOL ok; + HANDLE hProcess, h, pipeThreads[2]; + char cmdline[100]; + + hProcess = GetCurrentProcess(); + + ZeroMemory(&pi, sizeof(PROCESS_INFORMATION)); + ZeroMemory(&si, sizeof(STARTUPINFO)); + si.cb = sizeof(STARTUPINFO); + si.dwFlags = STARTF_USESTDHANDLES; + si.hStdInput = INVALID_HANDLE_VALUE; + + ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES)); + sa.nLength = sizeof(SECURITY_ATTRIBUTES); + sa.lpSecurityDescriptor = NULL; + sa.bInheritHandle = TRUE; + + /* create a non-inheritible pipe. */ + CreatePipe(&Out.pipe, &h, &sa, 0); + + /* dupe the write side, make it inheritible, and close the original. */ + DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, + 0, TRUE, DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE); + + /* Same as above, but for the error side. */ + CreatePipe(&Err.pipe, &h, &sa, 0); + DuplicateHandle(hProcess, h, hProcess, &si.hStdError, + 0, TRUE, DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE); + + /* base command line */ + strcpy(cmdline, "link.exe -nologo "); + /* append our option for testing */ + strcat(cmdline, option); + /* filename to compile, which exists, but is nothing and empty. */ +// strcat(cmdline, " nul"); + + ok = CreateProcess( + NULL, /* Module name. */ + cmdline, /* Command line. */ + NULL, /* Process handle not inheritable. */ + NULL, /* Thread handle not inheritable. */ + TRUE, /* yes, inherit handles. */ + DETACHED_PROCESS, /* No console for you. */ + NULL, /* Use parent's environment block. */ + NULL, /* Use parent's starting directory. */ + &si, /* Pointer to STARTUPINFO structure. */ + &pi); /* Pointer to PROCESS_INFORMATION structure. */ + + if (!ok) { + DWORD err = GetLastError(); + int chars = wsprintf(msg, "Tried to launch: \"%s\", but got error [%u]: ", cmdline, err); + + FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM | FORMAT_MESSAGE_IGNORE_INSERTS | + FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID) &msg[chars], + (300-chars), 0); + WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, strlen(msg), &err, NULL); + return 2; + } + + /* close our references to the write handles that have now been inherited. */ + CloseHandle(si.hStdOutput); + CloseHandle(si.hStdError); + + WaitForInputIdle(pi.hProcess, 5000); + CloseHandle(pi.hThread); + + /* start the pipe reader threads. */ + pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID); + pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID); + + /* block waiting for the process to end. */ + WaitForSingleObject(pi.hProcess, INFINITE); + CloseHandle(pi.hProcess); + + /* wait for our pipe to get done reading, should it be a little slow. */ + WaitForMultipleObjects(2, pipeThreads, TRUE, 500); + CloseHandle(pipeThreads[0]); + CloseHandle(pipeThreads[1]); + + /* look for the commandline warning code in the stderr stream. */ + return !(strstr(Out.buffer, "LNK1117") != NULL || strstr(Err.buffer, "LNK1117") != NULL); +} + +DWORD WINAPI +ReadFromPipe (LPVOID args) +{ + pipeinfo *pi = (pipeinfo *) args; + char *lastBuf = pi->buffer; + DWORD dwRead; + BOOL ok; + +again: + ok = ReadFile(pi->pipe, lastBuf, 25, &dwRead, 0L); + if (!ok || dwRead == 0) { + CloseHandle(pi->pipe); + return 0; + } + lastBuf += dwRead; + goto again; + + return 0; /* makes the compiler happy */ +} + +int +IsIn (const char *string, const char *substring) +{ + return (strstr(string, substring) != NULL); +} + + +static double +ReadVersionFromHeader(const char *file, const char *macro) +{ + double d = 0.0; + CHAR szBuffer[100]; + LPSTR p; + DWORD cbBuffer = 100; + FILE *fp = fopen(file, "r"); + if (fp != NULL) { + while (fgets(szBuffer, cbBuffer, fp) != NULL) { + if ((p = strstr(szBuffer, macro)) != NULL) { + while (*p && !isdigit(*p)) ++p; + d = strtod(p, NULL); + break; + } + } + fclose(fp); + } + return d; +} + +int +GetVersionFromHeader(const char *tclh, const char *tkh) +{ + double dTcl = 0.0, dTk = 0.0; + + if (tclh != NULL) + dTcl = ReadVersionFromHeader(tclh, "TCL_VERSION"); + if (tkh != NULL) + dTk = ReadVersionFromHeader(tkh, "TK_VERSION"); + + if (dTcl > 0 || dTk > 0) { + FILE *ofp = fopen("version.vc", "w"); + if (dTcl > 0) + fprintf(ofp, "TCL_DOTVERSION\t= %0.1f\nTCL_VERSION\t= %u\n", + dTcl, (int)(dTcl * 10.0)); + if (dTk > 0) + fprintf(ofp, "TK_DOTVERSION\t= %0.1f\nTK_VERSION\t= %u\n", + dTk, (int)(dTk * 10.0)); + fclose(ofp); + return 0; + } + return 1; +} diff --git a/win/rules.vc b/win/rules.vc new file mode 100644 index 0000000..ba4b828 --- /dev/null +++ b/win/rules.vc @@ -0,0 +1,436 @@ +#------------------------------------------------------------------------------ +# rules.vc -- +# +# Microsoft Visual C++ makefile include for decoding the commandline +# macros. This file does not need editing to build Tcl. +# +# This version is modified from the Tcl source version to support +# building extensions using nmake. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# Copyright (c) 2001-2002 David Gravereaux. +# Copyright (c) 2003 Patrick Thoyts +# +#------------------------------------------------------------------------------ +# RCS: @(#) $Id$ +#------------------------------------------------------------------------------ + +!ifndef _RULES_VC +_RULES_VC = 1 + +cc32 = $(CC) # built-in default. +link32 = link +lib32 = lib +rc32 = $(RC) # built-in default. + +!ifndef INSTALLDIR +### Assume the normal default. +_INSTALLDIR = C:\Program Files\Tcl +!else +### Fix the path separators. +_INSTALLDIR = $(INSTALLDIR:/=\) +!endif + +!ifndef MACHINE +MACHINE = IX86 +!endif + +!ifndef CFG_ENCODING +CFG_ENCODING = \"cp1252\" +!endif + +#---------------------------------------------------------- +# Set the proper copy method to avoid overwrite questions +# to the user when copying files and selecting the right +# "delete all" method. +#---------------------------------------------------------- + +!if "$(OS)" == "Windows_NT" +RMDIR = rmdir /S /Q +!if ![ver | find "4.0" > nul] +CPY = echo y | xcopy /i +!else +CPY = xcopy /i /y +!endif +!else +CPY = xcopy /i +RMDIR = deltree /Y +!endif + + +!message =============================================================================== + +#---------------------------------------------------------- +# build the helper app we need to overcome nmake's limiting +# environment. +#---------------------------------------------------------- + +!if !exist(nmakehlp.exe) +!if [$(cc32) -nologo -ML nmakehlp.c -link -subsystem:console > nul] +!endif +!endif + +#---------------------------------------------------------- +# Test for compiler features +#---------------------------------------------------------- + +### test for optimizations +!if [nmakehlp -c -Otip] +!message *** Compiler has 'Optimizations' +OPTIMIZING = 1 +!else +!message *** Compiler doesn't have 'Optimizations' +OPTIMIZING = 0 +!endif + +!if "$(MACHINE)" == "IX86" +### test for pentium errata +!if [nmakehlp -c -QI0f] +!message *** Compiler has 'Pentium 0x0f fix' +PENT_0F_ERRATA = 1 +!else +!message *** Compiler doesn't have 'Pentium 0x0f fix' +PENT_0F_ERRATA = 0 +!endif +### test for -align:4096, when align:512 will do. +!if [nmakehlp -l -opt:nowin98] +!message *** Linker has 'Win98 alignment problem' +ALIGN98_HACK = 1 +!else +!message *** Linker doesn't have 'Win98 alignment problem' +ALIGN98_HACK = 0 +!endif +!else +PENT_0F_ERRATA = 0 +ALIGN98_HACK = 0 +!endif + +!if "$(MACHINE)" == "IA64" +### test for Itanium errata +!if [nmakehlp -c -QIA64_Bx] +!message *** Compiler has 'B-stepping errata workarounds' +ITAN_B_ERRATA = 1 +!else +!message *** Compiler doesn't have 'B-stepping errata workarounds' +ITAN_B_ERRATA = 0 +!endif +!else +ITAN_B_ERRATA = 0 +!endif + +#---------------------------------------------------------- +# Decode the options requested. +#---------------------------------------------------------- + +!if "$(OPTS)" == "" || [nmakehlp -f "$(OPTS)" "none"] +STATIC_BUILD = 0 +TCL_THREADS = 0 +DEBUG = 0 +PROFILE = 0 +MSVCRT = 0 +LOIMPACT = 0 +TCL_USE_STATIC_PACKAGES = 0 +USE_THREAD_ALLOC = 0 +!else +!if [nmakehlp -f $(OPTS) "static"] +!message *** Doing static +STATIC_BUILD = 1 +!else +STATIC_BUILD = 0 +!endif +!if [nmakehlp -f $(OPTS) "msvcrt"] +!message *** Doing msvcrt +MSVCRT = 1 +!else +MSVCRT = 0 +!endif +!if [nmakehlp -f $(OPTS) "staticpkg"] +!message *** Doing staticpkg +TCL_USE_STATIC_PACKAGES = 1 +!else +TCL_USE_STATIC_PACKAGES = 0 +!endif +!if [nmakehlp -f $(OPTS) "threads"] +!message *** Doing threads +TCL_THREADS = 1 +!else +TCL_THREADS = 0 +!endif +!if [nmakehlp -f $(OPTS) "symbols"] +!message *** Doing symbols +DEBUG = 1 +!else +DEBUG = 0 +!endif +!if [nmakehlp -f $(OPTS) "profile"] +!message *** Doing profile +PROFILE = 1 +!else +PROFILE = 0 +!endif +!if [nmakehlp -f $(OPTS) "loimpact"] +!message *** Doing loimpact +LOIMPACT = 1 +!else +LOIMPACT = 0 +!endif +!if [nmakehlp -f $(OPTS) "thrdalloc"] +!message *** Doing thrdalloc +USE_THREAD_ALLOC = 1 +!else +USE_THREAD_ALLOC = 0 +!endif +!endif + + +!if !$(STATIC_BUILD) +# Make sure we don't build overly fat DLLs. +MSVCRT = 1 +# We shouldn't statically put the extensions inside the shell when dynamic. +TCL_USE_STATIC_PACKAGES = 0 +!endif + + +#---------------------------------------------------------- +# Figure-out how to name our intermediate and output directories. +# We wouldn't want different builds to use the same .obj files +# by accident. +#---------------------------------------------------------- + +SUFX = tsgx + +!if $(DEBUG) +BUILDDIRTOP = Debug +DBGX = g +!else +BUILDDIRTOP = Release +DBGX = +SUFX = $(SUFX:g=) +!endif + +TMP_DIRFULL = .\$(BUILDDIRTOP)\$(PROJECT)_ThreadedDynamicStaticX + +!if !$(STATIC_BUILD) +TMP_DIRFULL = $(TMP_DIRFULL:Static=) +SUFX = $(SUFX:s=) +EXT = dll +!if $(MSVCRT) +TMP_DIRFULL = $(TMP_DIRFULL:X=) +SUFX = $(SUFX:x=) +!endif +!else +TMP_DIRFULL = $(TMP_DIRFULL:Dynamic=) +EXT = lib +!if !$(MSVCRT) +TMP_DIRFULL = $(TMP_DIRFULL:X=) +SUFX = $(SUFX:x=) +!endif +!endif + +!if !$(TCL_THREADS) +TMP_DIRFULL = $(TMP_DIRFULL:Threaded=) +SUFX = $(SUFX:t=) +!endif + +!ifndef TMP_DIR +TMP_DIR = $(TMP_DIRFULL) +!ifndef OUT_DIR +OUT_DIR = .\$(BUILDDIRTOP) +!endif +!else +!ifndef OUT_DIR +OUT_DIR = $(TMP_DIR) +!endif +!endif + + +#---------------------------------------------------------- +# Decode the statistics requested. +#---------------------------------------------------------- + +!if "$(STATS)" == "" || [nmakehlp -f "$(STATS)" "none"] +TCL_MEM_DEBUG = 0 +TCL_COMPILE_DEBUG = 0 +!else +!if [nmakehlp -f $(STATS) "memdbg"] +!message *** Doing memdbg +TCL_MEM_DEBUG = 1 +!else +TCL_MEM_DEBUG = 0 +!endif +!if [nmakehlp -f $(STATS) "compdbg"] +!message *** Doing compdbg +TCL_COMPILE_DEBUG = 1 +!else +TCL_COMPILE_DEBUG = 0 +!endif +!endif + + +#---------------------------------------------------------- +# Set our defines now armed with our options. +#---------------------------------------------------------- + +OPTDEFINES = -DTCL_CFGVAL_ENCODING=$(CFG_ENCODING) + +!if $(TCL_MEM_DEBUG) +OPTDEFINES = -DTCL_MEM_DEBUG +!endif +!if $(TCL_COMPILE_DEBUG) +OPTDEFINES = $(OPTDEFINES) -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS +!endif +!if $(TCL_THREADS) +OPTDEFINES = $(OPTDEFINES) -DTCL_THREADS=1 +!if $(USE_THREAD_ALLOC) +OPTDEFINES = $(OPTDEFINES) -DUSE_THREAD_ALLOC=1 +!endif +!endif +!if $(STATIC_BUILD) +OPTDEFINES = $(OPTDEFINES) -DSTATIC_BUILD +!endif + +!if $(DEBUG) +OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_DEBUG +!elseif $(OPTIMIZING) +OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_OPTIMIZED +!endif +!if $(PROFILE) +OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_PROFILED +!endif +!if "$(MACHINE)" == "IA64" +OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_DO64BIT +!endif + + +#---------------------------------------------------------- +# Get common info used when building extensions. +#---------------------------------------------------------- + +!if "$(PROJECT)" != "tcl" + +# If INSTALLDIR set to tcl root dir then reset to the lib dir. +!if exist("$(_INSTALLDIR)\include\tcl.h") +_INSTALLDIR=$(_INSTALLDIR)\lib +!endif + +!if !defined(TCLDIR) +!if exist("$(_INSTALLDIR)\..\include\tcl.h") +TCLINSTALL = 1 +_TCLDIR = $(_INSTALLDIR)\.. +_TCL_H = $(_INSTALLDIR)\..\include\tcl.h +TCLDIR = $(_INSTALLDIR)\.. +!else +MSG=^ +Failed to find tcl.h. Set the TCLDIR macro. +!error $(MSG) +!endif +!else +_TCLDIR = $(TCLDIR:/=\) +!if exist("$(_TCLDIR)\include\tcl.h") +TCLINSTALL = 1 +_TCL_H = $(_TCLDIR)\include\tcl.h +!elseif exist("$(_TCLDIR)\generic\tcl.h") +TCLINSTALL = 0 +_TCL_H = $(_TCLDIR)\generic\tcl.h +!else +MSG =^ +Failed to find tcl.h. The TCLDIR macro does not appear correct. +!error $(MSG) +!endif +!endif + +!if [nmakehlp -v $(_TCL_H) ""] == 0 +!include version.vc +!else +TCL_DOTVERSION = 8.5 +TCL_VERSION = $(TCL_DOTVERSION:.=) +!endif + +!if $(TCLINSTALL) +TCLSH = "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)$(SUFX).exe" +TCLSTUBLIB = "$(_TCLDIR)\lib\tclstub$(TCL_VERSION).lib" +TCLIMPLIB = "$(_TCLDIR)\lib\tcl$(TCL_VERSION)$(SUFX).lib" +TCL_LIBRARY = $(_TCLDIR)\lib +TCL_INCLUDES = -I"$(_TCLDIR)\include" +!else +TCLSH = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)$(SUFX).exe" +TCLSTUBLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclstub$(TCL_VERSION).lib" +TCLIMPLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcl$(TCL_VERSION)$(SUFX).lib" +TCL_LIBRARY = $(_TCLDIR)\library +TCL_INCLUDES = -I"$(_TCLDIR)\generic" -I"$(_TCLDIR)\win" +!endif + +!endif + +#---------------------------------------------------------- +# Get Tk info for building extensions. +#---------------------------------------------------------- + +!if "$(PROJECT)" != "tcl" && "$(PROJECT)" != "tk" + +!if !defined(TKDIR) +!if exist("$(_INSTALLDIR)\..\include\tk.h") +TKINSTALL = 1 +_TKDIR = $(_INSTALLDIR)\.. +_TK_H = $(_TKDIR)\include\tk.h +TKDIR = $(_TKDIR) +!elseif exist("$(_TCLDIR)\include\tk.h") +TKINSTALL = 1 +_TKDIR = $(_TCLDIR) +_TK_H = $(_TKDIR)\include\tk.h +TKDIR = $(_TKDIR) +!else +MSG =^ +Failed to find tk.h. Set the TKDIR macro. +!error $(MSG) +!endif +!else +_TKDIR = $(TKDIR:/=\) +!if exist("$(_TKDIR)\include\tk.h") +TKINSTALL = 1 +_TK_H = $(_TKDIR)\include\tk.h +!elseif exist("$(_TKDIR)\generic\tk.h") +TKINSTALL = 0 +_TK_H = $(_TKDIR)\generic\tk.h +!else +MSG =^ +Failed to find tk.h. The TKDIR macro does not appear correct. +!error $(MSG) +!endif +!endif + +!if [nmakehlp -v $(_TCL_H) $(_TK_H)] == 0 +!include version.vc +!else +TK_DOTVERSION = 8.5 +TK_VERSION = $(TK_DOTVERSION:.=) +!endif + +!if $(TKINSTALL) +WISH = "$(_TKDIR)\bin\wish$(TK_VERSION)$(SUFX).exe" +TKSTUBLIB = "$(_TKDIR)\lib\tkstub$(TK_VERSION).lib" +TKIMPLIB = "$(_TKDIR)\lib\tk$(TK_VERSION)$(SUFX).lib" +TK_INCLUDES = -I"$(_TKDIR)\include" +!else +WISH = "$(_TKDIR)\win\$(BUILDDIRTOP)\wish$(TCL_VERSION)$(SUFX).exe" +TKSTUBLIB = "$(_TKDIR)\win\$(BUILDDIRTOP)\tkstub$(TCL_VERSION).lib" +TKIMPLIB = "$(_TKDIR)\win\$(BUILDDIRTOP)\tk$(TCL_VERSION)$(SUFX).lib" +TK_INCLUDES = -I"$(_TKDIR)\generic" -I"$(_TKDIR)\win" -I"$(_TKDIR)\xlib" +!endif + +!endif + + + +#---------------------------------------------------------- +# Display stats being used. +#---------------------------------------------------------- + +!message *** Intermediate directory will be '$(TMP_DIR)' +!message *** Output directory will be '$(OUT_DIR)' +!message *** Suffix for binaries will be '$(SUFX)' +!message *** Optional defines are '$(OPTDEFINES)' + +!endif diff --git a/win/tclWinFileMonitor.c b/win/tclWinFileMonitor.c new file mode 100644 index 0000000..4b9429c --- /dev/null +++ b/win/tclWinFileMonitor.c @@ -0,0 +1,311 @@ +/* tclWinFileMonitor.c - Copyright (C) 2003 Pat Thoyts + * + * Win32 Platform specific parts of the file monitoring package. + * + * ------------------------------------------------------------------------- + * See the file "license" for information on usage and redistribution + * of this file, and for a DISCLAIMER OF ALL WARRANTIES. + * ------------------------------------------------------------------------- + */ + +#include "tclFileMonitor.h" +#include +#include + +/* + * Platform specific monitor data + */ + +typedef struct TclWinFileMonitor { + struct TclFileMonitor monitor; + HANDLE handle; /* win32 handle for this monitor */ + LPCTSTR path; /* the directory to be monitored */ +} TclWinFileMonitor; + +static Tcl_EventSetupProc SetupProc; +static Tcl_EventCheckProc CheckProc; +static Tcl_EventProc EventProc; + +/* + * ---------------------------------------------------------------------- + * + * TclpFilemonitorInit -- + * + * Platform specific intialization. + * + * Results: + * Standard Tcl result code. + * + * ---------------------------------------------------------------------- + */ + +int +TclpFilemonitorInit(interp, pkgPtr) + Tcl_Interp *interp; + FileMonitorPkg *pkgPtr; +{ + return TCL_OK; +} + +/* + * ---------------------------------------------------------------------- + * + * CreateProc -- + * + * + * Results: + * A standard Tcl result code. + * + * Side Effects: + * + * + * ---------------------------------------------------------------------- + */ + +int +TclpFileMonitorCreateProc(clientData, interp, objc, objv) + ClientData clientData; + Tcl_Interp *interp; + int objc; + Tcl_Obj *CONST84 objv[]; +{ + enum { + MOD_ACCESS, MOD_MODIFY, MOD_CREATE, MOD_DELETE, MOD_RENAME, MOD_ATTRIB, + MOD_SIZE, MOD_SECURITY + }; + static CONST char *types[] = { + "access", "modify", "create", "delete", "rename", "attrib", + "size", "security", NULL + }; + FileMonitorPkg *pkgPtr = (FileMonitorPkg *)clientData; + TclWinFileMonitor *monitorPtr; + int r = TCL_OK, type = 0, index = 0, recurse = 0; + + if (objc < 5 || objc > 6) { + Tcl_WrongNumArgs(interp, 2, objv, "type path ?-recurse? script"); + return TCL_ERROR; + } + + if (objc == 6) { + if (!strcmp("-recurse", Tcl_GetString(objv[4])) == 0) { + Tcl_WrongNumArgs(interp, 2, objv, "type path ?recurse? script"); + return TCL_ERROR; + } + recurse = 1; + } + + r = Tcl_GetIndexFromObj(interp, objv[2], types, "type", 0, &index); + if (r == TCL_OK) { + switch (index) { + case MOD_ACCESS: type = FILE_NOTIFY_CHANGE_LAST_ACCESS; break; + case MOD_MODIFY: type = FILE_NOTIFY_CHANGE_LAST_WRITE; break; + case MOD_CREATE: type = FILE_NOTIFY_CHANGE_CREATION; break; + case MOD_DELETE: + case MOD_RENAME: type = FILE_NOTIFY_CHANGE_FILE_NAME + | FILE_NOTIFY_CHANGE_DIR_NAME; break; + case MOD_ATTRIB: type = FILE_NOTIFY_CHANGE_ATTRIBUTES; break; + case MOD_SIZE: type = FILE_NOTIFY_CHANGE_SIZE; break; + case MOD_SECURITY: type = FILE_NOTIFY_CHANGE_FILE_NAME; break; + default: + return TCL_ERROR; + } + } + + /* + * setup the event source. + */ + + if (r == TCL_OK) { + monitorPtr = (TclWinFileMonitor *)ckalloc(sizeof(TclWinFileMonitor)); + monitorPtr->monitor.cmdPtr = Tcl_DuplicateObj(objv[objc - 1]); + Tcl_IncrRefCount(monitorPtr->monitor.cmdPtr); + monitorPtr->monitor.interp = interp; + sprintf(monitorPtr->monitor.name, "monitor%lu", pkgPtr->id++); + + monitorPtr->path = strdup(Tcl_GetString(objv[3])); + monitorPtr->handle = FindFirstChangeNotification(monitorPtr->path, + recurse, type); + + /* + * Add this to the front of the list of monitors. + */ + + monitorPtr->monitor.nextPtr = pkgPtr->headPtr; + pkgPtr->headPtr = (TclFileMonitor *)monitorPtr; + + /* + * Register the event source. + */ + + Tcl_CreateEventSource(SetupProc, CheckProc, (ClientData) monitorPtr); + + /* + * Return a name to the script for use in delete and info + */ + + Tcl_SetStringObj(Tcl_GetObjResult(interp), + monitorPtr->monitor.name, -1); + } + + return r; +} + +/* + * ---------------------------------------------------------------------- + * + * TclpDeleteMonitor -- + * + * Release any platform specific resources and free the allocated + * storage. + * + * ---------------------------------------------------------------------- + */ + +int +TclpDeleteMonitor(interp, monitor) + Tcl_Interp *interp; + TclFileMonitor *monitor; +{ + TclWinFileMonitor *monitorPtr = (TclWinFileMonitor *)monitor; + + FindCloseChangeNotification(monitorPtr->handle); + free((void*)monitorPtr->path); + ckfree((char *)monitorPtr); + return TCL_OK; +} + +/* + * ---------------------------------------------------------------------- + * + * SetupProc -- + * + * The SetupProc is called when the event system prepares to wait + * for something to happen. If our handle is signalled then we + * set the block time to 0 prevent any blocking. + * + * Results: + * None. + * + * Side Effects: + * The notifier may be told not to block. + * + * ---------------------------------------------------------------------- + */ + +static void +SetupProc(ClientData clientData, int flags) +{ + TclWinFileMonitor * monitorPtr = (TclWinFileMonitor *)clientData; + Tcl_Time blockTime = { 0, 0 }; + DWORD dwWait; + + if (!(flags & TCL_FILE_EVENTS)) { + return; + } + + dwWait = WaitForSingleObject(monitorPtr->handle, 0); + if (dwWait == WAIT_OBJECT_0) { + Tcl_SetMaxBlockTime(&blockTime); + } + return; +} + +/* + * ---------------------------------------------------------------------- + * + * CheckProc -- + * + * The CheckProc is called once the event system has stopped + * waiting for something to happen. If our handle is signalled + * then we queue a Tcl event and start waiting for a new event. + * + * Results: + * None. + * + * Side Effects: + * A Tcl event may be queued. + * + * ---------------------------------------------------------------------- + */ + +static void +CheckProc(ClientData clientData, int flags) +{ + DWORD dwWait; + FileMonitorEvent *evPtr; + TclWinFileMonitor * monitorPtr = (TclWinFileMonitor *)clientData; + + if (!(flags & TCL_FILE_EVENTS)) { + return; + } + + dwWait = WaitForSingleObject(monitorPtr->handle, 0); + if (dwWait == WAIT_OBJECT_0) { + FindNextChangeNotification(monitorPtr->handle); + + evPtr = (FileMonitorEvent *)ckalloc(sizeof(FileMonitorEvent)); + evPtr->header.proc = EventProc; + evPtr->header.nextPtr = NULL; + evPtr->interp = monitorPtr->monitor.interp; + Tcl_Preserve(evPtr->interp); + evPtr->cmdPtr = monitorPtr->monitor.cmdPtr; + Tcl_IncrRefCount(evPtr->cmdPtr); + + Tcl_QueueEvent((Tcl_Event *)evPtr, TCL_QUEUE_TAIL); + } + + // worry about WAIT_FAILED and WAIT_ABANDONED ?? + + return; +} + +/* + * ---------------------------------------------------------------------- + * + * EventProc -- + * + * This is the Tcl event handler. We just evaluate the script + * that was provided when the monitor was created. + * + * Results: + * 1 if the event was handled. 0 is the flags indicate we should + * not process file events. + * + * Side Effects: + * Tcl script is evaluated. + * + * ---------------------------------------------------------------------- + */ + +static int +EventProc(Tcl_Event *eventPtr, int flags) +{ + FileMonitorEvent *evPtr = (FileMonitorEvent *)eventPtr; + + if (!(flags & TCL_FILE_EVENTS)) { + return 0; + } + + /* + * Evaluate the command and handle any error. + */ + + BackgroundEvalObjEx(evPtr->interp, evPtr->cmdPtr, TCL_EVAL_GLOBAL); + + /* + * Clean up reference counts that were set when the event was queued + */ + + Tcl_Release(evPtr->interp); + Tcl_DecrRefCount(evPtr->cmdPtr); + + return 1; /* 1 to indicate the event has been handled */ +} + +/* + * Local variables: + * mode: c + * c-indentation-style: tcltk + * tab-width: 8 + * End: + */ -- 2.23.0